SR1050C.pdf 데이터시트 (총 3 페이지) - 파일 다운로드 SR1050C 데이타시트 다운로드

No Preview Available !

SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 to 200 Volts CURRENT 10.0 Ampere
SR1020C
THRU
SR10200C
FEATURES
* Low switching noise
* Low forward voltage drop
* Low thermal resistance
* High current capability
* High switching capability
* High surge capabitity
* High reliability
MECHANICAL DATA
* Case: To-220 molded plastic
* Epoxy: Device has UL flammability classification 94V-O
* Lead: MIL-STD-202E method 208C guaranteed
* Mounting position: Any
* Weight: 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TO-220
.108
( 2.75)
.413 ( 10.5)
.374 ( 9.5)
.153 ( 3.9)
.146 ( 3.7)
.270 ( 6.9)
.230 ( 5.8)
.187 ( 4.7 )
.148 ( 3.8 )
.053 ( 1.3)
.047 ( 1.2)
PIN
1 23
.610 ( 15.5)
.583 ( 14.8)
.157
( 4.0)
.051
( 1.3)
.583 (14.8)
.531( 13.5)
.035 (0.9)
.028 ( 0.7)
.102 ( 2.6)
.091 ( 2.3)
PIN 1
PIN 3
.020 ( 0.5)
.012 ( 0.3)
PIN 2
HEATSINK
.126
( 3.2)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)
RATINGS
SYMBOL SR1020CSR1030C SR1035C SR1040C SR1045C SR1050C SR1060C SR1080C SR10100C SR10150C SR10200C UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM 20 30 35 40 45 50 60 80 100 150 200 Volts
Maximum RMS Voltage
VRMS 14 21 25 28 32 35 42 56 70 105 140 Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at Derating Case Temperature
VDC 20 30 35 40 45 50 60 80 100 150 200 Volts
IO 10.0 Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
150 Amps
Typical Thermal Resistance (Note 1)
RqJC
RqJA
3.0 0C / W
60
Typical Junction Capacitance (Note 3)
Operating Temperature Range
CJ 700
TJ
450
150
pF
0C
Storage Temperature Range
TSTG
-55 to + 150
0C
ELECTRICAL CHARACTERISTICS(@TA=25 OC unless otherwise noted)
CHARACTERISTICS
SYMBOL SR1020CSR1030C SR1035C SR1040C SR1045C SR1050C SR1060C SR1080C SR10100C SR10150C SR10200C UNITS
Maximum Instantaneous Forward Voltage at 5.0A DC
Maximum Average Reverse Current
at Rated DC Blocking Voltage
@TA = 25oC
@TA = 100oC
VF
IR
.65
.75 .85 Volts
0.2 mA
2 mA
NOTES : 1. Thermal Resistance : Heat-sink mounted.
2. Suffix “A” = Common Anode.
3. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
4. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
2006-11

No Preview Available !

RATING AND CHARACTERISTICS CURVES ( SR1020C THRU SR10200C )
12 10
10
1.0 TA = 125 OC
8
6
4
Single Phase Half Wave
2
60Hz Inductive or
Resistive Load
0.375" (9.5mm) Lead Length
0
0 50 100 150
LEAD TEMPERATURE, (OC)
FIG.1 TYPICAL FORWARD CURRENT
DERATING CURVE
50
SR1020C~SR1040C
SR1050C~SR1060C
10
SR1080C~SR10200C
1.0
TJ = 25 OC
Pulse width=300mS
1% Duty Cycle
0.1
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
INSTANTANEOUS FORWARD VOLTAGE, (V)
FIG.3 TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
150
125
100
0.1 TA = 75 OC
0.01
TA = 25 OC
SR1020C~SR1040C
SR1050C~SR1060C
0.0010
SR1080C~SR10200C
20 40 60 80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
FIG.2 TYPICAL REVERSE
CHARACTERISTICS
4
TJ = 25 OC
2
1
0.8
0.6
0.4
0.2
SR1050CS~SRR1012002C00~CSR1045C
0.1
0.1
0.4
1.0 4 10
REVERSE VOLTAGE, (V)
40 80100
FIG.4 TYPICAL JUNCTION CAPACITANCE
8.3mS Single Half Sine-Wave
JEDEC Method
75
50
25
0
1 25
10 20 50
100
NUMBER OF CYCLES AT 60Hz
FIG.5 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT

No Preview Available !

DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.