HK19F-DC6V.pdf 데이터시트 (총 3 페이지) - 파일 다운로드 HK19F-DC6V 데이타시트 다운로드

No Preview Available !

HK 19F
SUBMINIATURE DIP RELAY
Features
● 2 Form C configuration
● High switching capacity: 125VA/60W
Bifurcated contacts
● Epoxy sealed for automatic-wave
soldering and cleaning
● Environmental friendly product (RoHS compliant)
● Outline Dimensions: (20.2 x 10.0 x 12.0) mm
CONTACT DATA
Contact Form
Contact Material
Contact Ratings
Max Switching Voltage
Max Switching Current
Max Switching Power
Contact Resistance
Electrical Life
Mechanical Life
2C
Silver Alloy
1A 125VAC /2A 30VDC
250VAC/125VDC
2A
125VA /60W
100MΩ(at 1A 6VDC)
1X105Ops(30Ops/min)
1X107Ops(300Ops/min)
GENERAL DATA
Insulation Resistance
Between coil & contacts
Dielectric Strength
Between open contacts
Operate Time
Release Time
Temperature Range
Functional
Shock Resistance
Destructive
Vibration Resistance
Humidity
Weight
Safety Standard
100MΩ 500VDC
1000VAC 1min
600VAC 1min
Max. 6ms
Max. 4ms
- 30to +70
98m/s2 (10g)
980m/s2 (100g)
10 to 55Hz 1.5mm
40% to 85% RH
Approx. 5g
CUL TüV
COIL DATA
Nominal Voltage
(VDC)
Coil Resistance at 20± 10%(Ω)
0.15W 0.20W 0.36W 0.45W
3 60 45 25 20
5 167 125 70 56
6 240 180 100 80
9 540 405 225 180
12 960 720 400 320
24 2880 1600 1280
Max Operate Voltage
(VDC)
2.25
3.75
4.50
6.75
9.00
18.00
Min Release Voltage
(VDC)
0.30
0.50
0.60
0.90
1.20
2.40
Max Applicate Voltage
(VDC)
3.90
6.50
7.80
11.70
15.60
31.20
1

No Preview Available !

ORDERING INFORMATION
HK19F - DC 6V - S D 2C X X
Special request code
Mounting termination
Contact Form
Coil Power
Type of Sealing
Coil Voltage
Coil Type
Type
G:RoHS
NIL:PCB
NIL:2C
NIL:0.36W
D:0.15W H:0.2W L:0.45W
F: Flow Solder Type
S: Plastic Sealed Type
3V,5V,6V,9V,12V,24V
DC
HK19F
OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT
20.2 10
Outline Dimensions
Unit: mm
1.2
8-Ø1
PCB Layout
(Bottom view)
2.54 Wiring Diagram
(Bottom view)
7.62 5.08 5.08
Remark: 1) In case of no tolerance shown in outline dimension: outline dimension 1mm, tolerance should be ±0.2mm; outline dimension
>1mm and 5mm, tolerance should be ±0.3mm; outline dimension >5mm, tolerance should be ±0.4mm.
2) The tolerance without indicating for PCB layout is always ±0.1mm.
3) The width of the gridding is 2.54mm.
2

No Preview Available !

CHARACTERISTIC CURVES
MAXIMUM SWITCHING POWER
1000V
AC Resistive Load
100V
10V
DC Resistive Load
10mV
10uA
100mA
1A 10A
Contact Current
ENDURANCE CURVE
100
30VDC Resistive Load
30
10
125VAC
Resistive Load
1
0
12
3
Contact Current (A)
Notice
1) To avoid using relays under strong magnetic field which will change the parameters of relays such as pick-up voltage and drop-out voltage.
2) The relay may be damaged because of falling ot when shocking conditions exceed the requirement.
3) Regarding the plastic sealed relay, we should leave it cooling naturally untill below 40o C after welding, then clean it and deal with coating remarkably
the temperature of solvents should also be controlled below 4o 0 C.Please avoid cleaning the relay by ultrasonic, avoid using the solvents
like gasoline, Freon, and so on, which would affect the configuration of relay or influence the environment.
4) About preferable condition of operation, storage and transportation, please refer to "Explanation to terminology and guidetines of relay".
Disclaimer
This datasheet is for the customets’ reference. All the specifications ate subject to change without notice.
We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a tight position
choose the suitable product fot their own application. If thete is any query, please contact Everway for the technical service. However it is the
user’s responsibility to determine which product should be used only.
COPYRIGHT 2011© EVER-WAY INDUSTRY COMPANY LIMITED
3