MCP6481.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 MCP6481 데이타시트 다운로드

No Preview Available !

MCP6481/2/4
4 MHz, Low-Input Bias Current Op Amps
Features
• Low-Input Bias Current
- 150 pA (typical, TA = +125°C)
• Low Quiescent Current
- 240 µA/amplifier (typical)
• Low-Input Offset Voltage
- ±1.5 mV (maximum)
• Supply Voltage Range: 2.2V to 5.5V
• Rail-to-Rail Input/Output
• Gain Bandwidth Product: 4 MHz (typical)
• Slew Rate: 2.7 V/µs (typical)
• Unity Gain Stable
• No Phase Reversal
• Small Packages
- Singles in SC70-5, SOT-23-5
• Extended Temperature Range
- -40°C to +125°C
Applications
• Photodiode Amplifier
• pH Electrode Amplifier
• Low Leakage Amplifier
• Piezoelectric Transducer Amplifier
• Active Analog Filter
• Battery-Powered Signal Conditioning
Description
The Microchip MCP6481/2/4 family of operational
amplifiers (op amps) has low-input bias current
(150 pA, typical at 125°C) and rail-to-rail input and
output operation. This family is unity gain stable and
has a gain bandwidth product of 4 MHz (typical). These
devices operate with a single-supply voltage as low as
2.2V, while only drawing 240 µA/amplifier (typical) of
quiescent current. These features make the family of
op amps well suited for photodiode amplifier, pH
electrode amplifier, low leakage amplifier, and battery-
powered signal conditioning applications, etc.
The MCP6481/2/4 family is offered in single
(MCP6481), dual (MCP6482), quad (MCP6484)
packages. All devices are designed using an advanced
CMOS process and fully specified in extended
temperature range from -40°C to +125°C.
Related Parts
• MCP6471/2/4: 2 MHz, Low-Input Bias Current Op
Amps
• MCP6491/2/4: 7.5 MHz, Low-Input Bias Current
Op Amps
Design Aids
• SPICE Macro Models
• FilterLab® Software
• MAPS (Microchip Advanced Part Selector)
• Analog Demonstration and Evaluation Boards
• Application Notes
Package Types
MCP6481
SC70, SOT-23
VOUT 1
VSS 2
VIN+ 3
5 VDD
4 VIN
MCP6482
SOIC, MSOP
VOUTA 1
VINA2
VINA+ 3
VSS 4
8 VDD
7 VOUTB
6 VINB
5 VINB+
* Includes Exposed Thermal Pad (EP); see Table 3-1.
MCP6482
2x3 TDFN*
MCP6484
SOIC, TSSOP
VOUTA 1
8 VDD VOUTA 1
VINA2 EP 7 VOUTB VINA2
VINA+ 3 9 6 VINBVINA+ 3
VSS 4
5 VINB+ VDD 4
VINB+ 5
VINB6
VOUTB 7
14 VOUTD
13 VIND
12 VIND+
11 VSS
10 VINC+
9 VINC
8 VOUTC
2012-2013 Microchip Technology Inc.
DS20002322C-page 1

No Preview Available !

MCP6481/2/4
Typical Application
C2
R2
ID1 VDD
Light
D1 MCP648X
+
VOUT
Photodiode Amplifier
DS20002322C-page 2
2012-2013 Microchip Technology Inc.

No Preview Available !

MCP6481/2/4
1.0 ELECTRICAL CHARACTERISTICS
1.1 Absolute Maximum Ratings †
VDD – VSS .................................................................................................................................... .....................................................6.5V
Current at Input Pins ................................................................................................................ ......................................................±2 mA
Analog Inputs (VIN+, VIN-)††............................................................................................................... .............VSS – 1.0V to VDD + 1.0V
All Other Inputs and Outputs ...........................................................................................................................VSS – 0.3V to VDD + 0.3V
Difference Input Voltage...........................................................................................................................................................VDD – VSS
Output Short-Circuit Current ................................................................................................................ ...................................continuous
Current at Output and Supply Pins ............................................................................................................... ..............................±55 mA
Storage Temperature ................................................................................................................ .....................................-65°C to +150°C
Maximum Junction Temperature (TJ) ................................................................................................................ ...........................+150°C
ESD protection on all pins (HBM)  4 kV
Note 1: See Section 4.1.2, Input Voltage Limits.
† Notice: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at those or any other conditions above those indicated
in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended
periods may affect device reliability.
1.2 Specifications
TABLE 1-1: DC ELECTRICAL SPECIFICATIONS
Electrical Characteristics: Unless otherwise indicated, VDD = +2.2V to +5.5V, VSS = GND, TA = +25°C,
VCM = VDD/2, VOUT VDD/2, VL = VDD/2 and RL = 10 kto VL. (Refer to Figure 1-1).
Parameters
Sym.
Min. Typ. Max. Units
Conditions
Input Offset
Input Offset Voltage
Input Offset Drift with Temperature
Power Supply Rejection Ratio
VOS
VOS/TA
PSRR
Input Bias Current and Impedance
-1.5
75
±2.5
91
+1.5
mV VDD = 3.0V, VCM = VDD/4
µV/°C TA = -40°C to +125°C
dB VCM = VDD/4
Input Bias Current
Input Offset Current
Common Mode Input Impedance
Differential Input Impedance
Common Mode
IB
IOS
ZCM
ZDIFF
— ±1 — pA
— 8 — pA TA = +85°C
— 150 350 pA TA = +125°C
— ±0.1 — pA
— 1013||6 — ||pF
— 1013||6 — ||pF
Common Mode Input Voltage Range VCMR VSS - 0.3 — VDD + 0.3 V
Common Mode Rejection Ratio
CMRR
65
87
— dB VCM = -0.3V to 2.5V,
VDD = 2.2V
70 89 — dB VCM = -0.3V to 5.8V,
VDD = 5.5V
Open-Loop Gain
DC Open-Loop Gain (Large Signal)
AOL
95 115 — dB 0.2V < VOUT <(VDD – 0.2V)
VDD = 5.5V, VCM = VSS
2012-2013 Microchip Technology Inc.
DS20002322C-page 3

No Preview Available !

MCP6481/2/4
TABLE 1-1: DC ELECTRICAL SPECIFICATIONS (CONTINUED)
Electrical Characteristics: Unless otherwise indicated, VDD = +2.2V to +5.5V, VSS = GND, TA = +25°C,
VCM = VDD/2, VOUT VDD/2, VL = VDD/2 and RL = 10 kto VL. (Refer to Figure 1-1).
Parameters
Sym.
Min. Typ. Max. Units
Conditions
Output
High-Level Output Voltage
Low-Level Output Voltage
Output Short-Circuit Current
Power Supply
Supply Voltage
Quiescent Current per Amplifier
VOH
2.180 2.196
V VDD = 2.2V
0.5V input overdrive
5.480 5.493
V VDD = 5.5V
0.5V input overdrive
VOL — 0.004 0.020 V VDD = 2.2V
0.5 V input overdrive
— 0.007 0.020 V VDD = 5.5V
0.5 V input overdrive
ISC — ±12 — mA VDD = 2.2V
— ±36 — mA VDD = 5.5V
VDD 2.2 — 5.5 V
IQ 100 240 400 µA IO = 0, VCM = VDD/4
TABLE 1-2: AC ELECTRICAL SPECIFICATIONS
Electrical Characteristics: Unless otherwise indicated, TA = +25°C, VDD = +2.2V to +5.5V, VSS = GND,
VCM = VDD/2, VOUT VDD/2, VL = VDD/2, RL = 10 kto VL and CL = 20 pF. (Refer to Figure 1-1).
Parameters
Sym. Min. Typ. Max. Units
Conditions
AC Response
Gain Bandwidth Product
Phase Margin
Slew Rate
Noise
Input Noise Voltage
Input Noise Voltage Density
Input Noise Current Density
GBWP — 4 —
PM — 60 —
SR — 2.7 —
MHz
°
V/µs
G = +1V/V
Eni — 7 — µVp-p f = 0.1 Hz to 10 Hz
eni — 23 — nV/Hz f = 1 kHz
— 18 — nV/Hz f = 10 kHz
ini — 0.6 — fA/Hz f = 1 kHz
TABLE 1-3: TEMPERATURE SPECIFICATIONS
Electrical Characteristics: Unless otherwise indicated, VDD = +2.2V to +5.5V and VSS = GND.
Parameters
Sym. Min. Typ. Max. Units
Conditions
Temperature Ranges
Operating Temperature Range
Storage Temperature Range
Thermal Package Resistances
TA -40 — +125 °C Note 1
TA -65 — +150 °C
Thermal Resistance, 5L-SC-70
JA — 331 — °C/W
Thermal Resistance, 5L-SOT-23
JA — 256 — °C/W
Thermal Resistance, 8L-2x3 TDFN
JA — 52.5 — °C/W
Thermal Resistance, 8L-MSOP
JA — 211 — °C/W
Thermal Resistance, 8L-SOIC
JA — 149.5 — °C/W
Thermal Resistance, 14L-SOIC
JA — 95.3 — °C/W
Thermal Resistance, 14L-TSSOP
JA — 100 — °C/W
Note 1: The internal junction temperature (TJ) must not exceed the absolute maximum specification of +150°C.
DS20002322C-page 4
2012-2013 Microchip Technology Inc.

No Preview Available !

1.3 Test Circuits
The circuit used for most DC and AC tests is shown in
Figure 1-1. This circuit can independently set VCM and
VOUT (refer to Equation 1-1). Note that VCM is not the
circuit’s common mode voltage ((VP + VM)/2), and that
VOST includes VOS plus the effects (on the input offset
error, VOST) of temperature, CMRR, PSRR and AOL.
EQUATION 1-1:
GDM = RF RG
VCM = VP + VDD 22
VOST = VIN+ VIN
VOUT = VDD 2+ VP VM+ VOST 1 + GDM
Where:
GDM = Differential Mode Gain
VCM = Op Amp’s Common Mode
Input Voltage
VOST = Op Amp’s Total Input Offset
Voltage
(V/V)
(V)
(mV)
MCP6481/2/4
CF
6.8 pF
RG
100 k
VP
VIN+
RF
100 k
MCP648X
VIN–
VM
RG
100 k
RF
100 k
VDD
VDD/2
CB1
100 nF
CB2
1 µF
RL
10 k
VOUT
CL
20 pF
CF
6.8 pF
VL
FIGURE 1-1:
AC and DC Test Circuit for
Most Specifications.
2012-2013 Microchip Technology Inc.
DS20002322C-page 5