DATA SHEET • SMPA1320-079LF SERIES: LOW RESISTANCE, LOW CAPACITANCE, PLASTIC PACKAGED PIN DIODE
Electrical and Mechanical Specifications
The absolute maximum ratings of the SMPA1320-079LF are
provided in Table 2. Electrical specifications are provided in
Table 3. Resistance versus temperature measurements are
provided in Table 4.
Typical performance characteristics of the SMPA1320-079LF are
illustrated in Figures 1 to 4. Package dimensions are shown in
Figure 5, and tape and reel dimensions are provided in Figure 6.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
The SMPA1320-079LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Table 2. SMPA1320-079LF Absolute Maximum Ratings (Note 1)
VR 50 V
Power dissipation @ 25 °C lead temperature
Charged Device Model (CDM), Class 3
Human Body Model (HBM), Class 2
Machine Model (MM), Class B
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. SMPA1320-079LF Electrical Specifications (Note 1)
(TA = +25 C, Unless Otherwise Noted)
IR VR = 50 V
CT F = 1 MHz, V = 30 V
RS F = 100 MHz
I = 1 mA
I = 10 mA
VF IF = 10 mA
TI IF = 10 mA
I region width
Note 1: Performance is guaranteed only under the conditions listed in this table.
Min Typical Max
Skyworks Solutions, Inc. • Phone  376-3000 • Fax  376-3100 • email@example.com • www.skyworksinc.com
2 August 6, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203195B