BYM12-400.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 BYM12-400 데이타시트 다운로드

No Preview Available !

BYM12-50 thru BYM12-400, EGL41A thru EGL41G
Vishay General Semiconductor
Surface Mount Glass Passivated Ultrafast Rectifier
SUPERECTIFIER®
DO-213AB (GL41)
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
VRRM
50 V to 400 V
IFSM
30 A
trr 50 ns
VF 1.0 V, 1.25 V
TJ max.
175 °C
FEATURES
• Superectifier structure for high reliability condition
• Cavity-free glass-passivated junction
• Ideal for automated placement
• Ultrafast reverse recovery time
• Low switching losses, high efficiency
• High forward surge capability
• Meets environmental standard MIL-S-19500
• Meets MSL level 1, per J-STD-020, LF maximum peak of
250 °C
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in high frequency rectification and freewheeling
application in switching mode converters and inverters for
consumer, computer, automotive and telecommunication.
MECHANICAL DATA
Case: DO-213AB, molded epoxy over glass body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Two bands indicate cathode end - 1st band
denotes device type and 2nd band denotes repetitive peak
reverse voltage rating
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
BYM12-50 BYM12-100 BYM12-150 BYM12-200 BYM12-300 BYM12-400
FAST EFFICIENT DEVICE:
1ST BAND IS GREEN
SYMBOL
EGL41A
EGL41B
EGL41C
EGL41D
EGL41F
UNIT
EGL41G
Polarity color bands (2nd band)
Gray
Red
Pink
Orange
Brown
Yellow
Maximum repetitive peak
reverse voltage
VRRM
50
100 150 200 300 400 V
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified
current at TT = 75 °C
Peak forward surge current 8.3 ms
single half sine-wave superimposed
on rated load
VRMS
VDC
IF(AV)
IFSM
35
50
70 105 140 210 280 V
100 150 200 300 400 V
1.0 A
30 A
Operating junction and storage
temperature range
TJ, TSTG
- 65 to + 175
°C
Document Number: 88581 For technical questions within your region, please contact one of the following:
Revision: 15-Mar-11
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
1
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

BYM12-50 thru BYM12-400, EGL41A thru EGL41G
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST
CONDITIONS
SYMBOL
BYM12-50
EGL41A
BYM12-100
EGL41B
BYM12-150
EGL41C
BYM12-200
EGL41D
BYM12-300
EGL41F
BYM12-400
EGL41G
UNIT
Max. instantaneous
forward voltage
1.0 A
VF (1)
1.0
1.25 V
Max. DC reverse
current at rated DC
blocking voltage
TA = 25 °C
TA = 125 °C
IR (1)
5.0
μA
50
Max. reverse
recovery time
IF = 0.5 A,
IR = 1.0 A,
Irr = 0.25 A
trr
50 ns
Typical junction
capacitance
4.0 V, 1 MHz
CJ
20
14 pF
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
BYM12-50 BYM12-100 BYM12-150 BYM12-200 BYM12-300 BYM12-400
SYMBOL
UNIT
EGL41A EGL41B EGL41C EGL41D EGL41F EGL41G
Maximum thermal resistance
RJA (1)
RJT (2)
60
°C/W
30
Notes
(1) Thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
(2) Thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE
EGL41D-E3/96
0.114
96
EGL41D-E3/97
0.114
97
EGL41DHE3/96 (1)
0.114
96
EGL41DHE3/97 (1)
0.114
97
Note
(1) AEC-Q101 qualified
BASE QUANTITY
1500
5000
1500
5000
DELIVERY MODE
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 C unless otherwise noted)
1.0
30
25
20
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
0.5 15
Resistive or Inductive Load
10
5.0
0
0 25 50 75 100 125 150 175
Lead Temperature (°C)
Fig. 1 - Maximum Forward Current Derating Curve
0
1 10 100
Number of Cycles at 60 Hz
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
www.vishay.com
2
For technical questions within your region, please contact one of the following: Document Number: 88581
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Revision: 15-Mar-11
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

BYM12-50 thru BYM12-400, EGL41A thru EGL41G
Vishay General Semiconductor
50
Pulse Width = 300 µs
1 % Duty Cycle
10 TJ = 150 °C
1 TJ = 25 °C
0.1
0.01
0.2
EGL41A thru EGL41D
EGL41F thru EGL41G
0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
Instantaneous Forward Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
70
TJ = 25 °C
60 f = 1.0 MHz
Vsig = 50 mVp-p
50
40
30
20
10
0
0.1
EGL41A thru EGL41D
EGL41F thru EGL41G
1 10
Reverse Voltage (V)
100
Fig. 5 - Typical Junction Capacitance
1000
100
100
TJ = 150 °C
10
TJ = 100 °C
1
0.1
TJ = 25 °C
0.01
0
20 40 60 80 100
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Reverse Leakage Characteristics
10
1
0.1
0.01
0.1 1 10
t - Pulse Duration (s)
100
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-213AB (GL41)
Solderable Ends
1st Band
D2
=
D1
+
-
0
0.008
(0.20)
D2
D1 =
0.105
0.095
(2.67)
(2.41)
0.022 (0.56)
0.018 (0.46)
0.205 (5.2)
0.185 (4.7)
0.022 (0.56)
0.018 (0.46)
1st Band Denotes Type and Positive End (Cathode)
0.049 (1.25)
MIN.
Mounting Pad Layout
0.138 (3.5)
MAX.
0.118 (3.0)
MIN.
0.238 (6.0)
REF.
Document Number: 88581 For technical questions within your region, please contact one of the following:
Revision: 15-Mar-11
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
3
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1