CPH3461.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 CPH3461 데이타시트 다운로드

No Preview Available !

CPH3461
Power MOSFET
250V, 6.5, 350mA, Single N-Channel
www.onsemi.com
Features
On-Resistance RDS(on)1=5(typ)
2.5V Drive
Pb-Free, Halogen Free and RoHS Compliance
ESD Diode - Protected Gate
Low Ciss and High Speed Switching
Specifications
Absolute Maximum Ratings at Ta = 25C
Parameter
Symbol
Conditions
Drain to Source Voltage
Gate to Source Voltage
Drain to Gate Voltage
Gate to Drain Voltage
VDSS
VGSS
VDGS
VGDS
Drain Current (DC)
Drain Current (Pulse)
Power Dissipation
Junction Temperature
ID
IDP PW10s, duty cycle1%
PD When mounted on ceramic substrate (900mm2 0.8mm)
Tj
Storage Temperature
Tstg
Value
250
10
250
10
350
1.4
1.0
150
55 to +150
Unit
V
V
V
V
mA
A
W
C
C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed,
damage may occur and reliability may be affected.
Thermal Resistance Ratings
Parameter
Junction to Ambient
When mounted on ceramic substrate (900mm20.8mm)
Symbol
RJA
Value
125
Unit
C/W
Electrical Characteristics at Ta 25C
Parameter
Drain to Source Breakdown Voltage
Zero-Gate Voltage Drain Current
Gate to Source Leakage Current
Gate Threshold Voltage
Forward Transconductance
Static Drain to Source On-State Resistance
Symbol
V(BR)DSS
IDSS
IGSS
VGS(th)
gFS
RDS(on)1
RDS(on)2
Conditions
ID=1mA, VGS=0V
VDS=250V, VGS=0V
VGS=±8V, VDS=0V
VDS=10V, ID=1mA
VDS=10V, ID=170mA
ID=170mA, VGS=4.5V
ID=170mA, VGS=2.5V
min
250
0.4
Value
Unit
typ max
V
1 A
10 A
1.3 V
1S
5 6.5
5.1 7.2
Continued on next page.
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
February 2015 - Rev. 2
1
Publication Order Number :
CPH3461/D

No Preview Available !

Continued from preceding page.
Parameter
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Turn-ON Delay Time
Rise Time
Turn-OFF Delay Time
Fall Time
Total Gate Charge
Gate to Source Charge
Gate to Drain “Miller” Charge
Forward Diode Voltage
CPH3461
Symbol
Ciss
Coss
Crss
td(on)
tr
td(off)
tf
Qg
Qgs
Qgd
VSD
Conditions
VDS=20V, f=1MHz
See specified Test Circuit
VDS=125V, VGS=4.5V, ID=350mA
IS=350mA, VGS=0V
Value
Unit
min typ max
140 pF
8 pF
3 pF
7.5 ns
7.3 ns
23 ns
43 ns
2.1 nC
0.3 nC
0.7 nC
0.79
1.2 V
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be
indicated by the Electrical Characteristics if operated under different conditions.
Packing Type : TL
Marking
Electrical Connection
Switching Time Test Circuit
1 : Gate
2 : Source
3 : Drain
ORDERING INFORMATION
Device
CPH3461-TL-H
CPH3461-TL-W
Package
CPH3,SC-59
SOT-23,TO-236
Shipping
3,000pcs. / Tape & Reel
Note
Pb-Free and Halogen Free
www.onsemi.com
2

No Preview Available !

CPH3461
www.onsemi.com
3

No Preview Available !

CPH3461
www.onsemi.com
4

No Preview Available !

Package Dimensions
CPH3461-TL-H, CPH3461-TL-W
CPH3
CASE 318BA
ISSUE O
unit : mm
1: Gate
2: Source
3: Drain
CPH3461
Recommended Soldering
Footprint 0.6
0.95 0.95
Note on usage : Since the CPH3461 is a MOSFET product, please avoid using this device in the vicinity
of highly charged objects.
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States
and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of
SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without
further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose,
nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can
and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are
not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was
negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all
applicable copyright laws and is not for resale in any manner.
www.onsemi.com
5