1N5391G.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 1N5391G 데이타시트 다운로드

No Preview Available !

Features
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
High temperature metallurgically bonded construction
Glass passivated cavity-free junction
Capable of meeting environmental standards of
MIL-S-19500
1.5 ampere operation at TA=70 with no
thermal runaway
Typical IR less than 0.1 A
High temperature soldering guaranteed:
350 /10 seconds, 0.375” (9.5mm) lead length,
5 lbs. (2.3kg) tension
Mechanical Data
Case: DO-15 molded plastic over glass body
Terminals: Plated axial leads, solderable per
MIL-STD-750, method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.014 ounce, 0.395 gram
1N5391G THRU 1N5399G
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.5 Amperes
D IM E N S IO N S
inches
mm
DIM Note
Min.
Max.
Min.
Max.
A
0.228
0.299
5.8
7.6
B
0.102
0.142
2.6
3.6
C
0.028
0.034
0.71
0.86
D 1.000 - 25.40 -
Maximum Ratings and Electrical Characteristics
Ratings at 25 ambient temperature unless otherwise specified.
Symbols
1N53 1N53 1N53 1N53 1N53 1N53 1N53 1N53 1N53
91G 92G 93G 94G 95G 96G 97G 98G 99G
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375" (9.5mm) lead length at TL=70
Peak forward surge current
8.3mS single half sine-wave superimposed
on rated load (MIL-STD-750D 4066 method)
VRRM
VRMS
VDC
I(AV)
IFSM
50 100 200 300 400 500 600 800 1000
35 70 140 210 280 350 420 560 700
50 100 200 300 400 500 600 800 1000
1.5
50.0
Maximum instantaneous forward voltage at 1.5A, T =70
A
Maximum DC reverse current
at rated DC blocking voltage
TTAA==12550
Typical reverse recovery time (Note 1)
Typical junction capacitance (Note 2)
Typical thermal resistance (Note 3)
V
F
IR
Trr
CJ
R JA
1.4
5.0
300.0
2.0
15.0
45.0
Operating junction and storage temperature range
TJ, TSTG
Notes:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts
(3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted
-65 to +175
Units
Volts
Volts
Volts
Amps
Amps
Volts
A
S
F
/W
1

No Preview Available !

RATINGS AND CHARACTERISTIC CURVES
2