L1206.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 L1206 데이타시트 다운로드

No Preview Available !

www.vishay.com
L
Vishay Sfernice
SMD Wraparound Ultra Low Value Thin Film Resistors
With extremely low resistance and high power capabilities,
these ultra low value resistors are available with solderable
or weldable terminations.
FEATURES
• NiCr + Ta2O5 resistive layer
• Pre-soldered or gold terminations
• No inductance for high frequency applications
• Alumina substrates for high power handling
capability
• Resistance range: 0.1 to 9.99
Available
Available
• TCR down to 50 ppm/°C
Available
• Power rating: Up to 2 W at + 70 °C
• Withstand AEC-Q200 humidity test
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE
RESISTANCE RANGE
RATED POWER
P70 °C
W
L0603
0603
0.1 to 9.99
0.125
L0805
L1206
0805
1206
0.1 to 9.99
0.1 to 9.99
0.2
0.33
L1505
1505
0.1 to 9.99
0.5
L2010
L2512
2010
2512
0.1 to 9.99
0.1 to 9.99
1.0
2.0 (1)
Note
(1) With special assembly care
LIMITING ELEMENT
VOLTAGE
V
50
50
50
50
50
50
TOLERANCE
±%
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
TEMPERATURE
COEFFICIENT
± ppm/°C
50, 100, 200, 300
50, 100, 200, 300
50, 100, 200, 300
50, 100, 200, 300
50, 100, 200, 300
50, 100, 200, 300
CLIMATIC SPECIFICATIONS
Operating temperature
range
- 55 °C; + 155 °C
MECHANICAL SPECIFICATIONS
Substrate
Alumina
Technology
Coating
Terminations
NiCr + Ta2O5
Silicone
Solderable
B type: SnPb over nickel barrier
N type: SnAg over nickel barrier
G type: Gold over nickel barrier
Note
• Refer to Application Note “Guidelines for Vishay Sfernice
Resistive and Inductive Components” (document number:
52029) for recommended reflow profile. Profile #3 applies.
TOLERANCE AND TCR VS. OHMIC VALUE
OHMIC VALUE
RANGE in
TIGHTEST
TOLERANCE
(%)
BEST
TCR
(ppm/°C)
TERMINATIONS
0R1 < 0R25
1 300 N or B
0R25 < 0R5
1 200 N or B
0R5 < 2R5
1 100 N or B
2R5 < 9R99
1 50 N or B
0R1 < 0R25
5 300
G
0R25 < 0R5
5 200
G
0R < 1R
5 100
G
1R < 2R5
3 100
G
2R5 to 9R99 3 50
G
Revision: 04-Sep-14
1 Document Number: 53018
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

www.vishay.com
DIMENSIONS in millimeters (inches)
A
L
Vishay Sfernice
CASE SIZE
0603
0805
1206
1505
2010
2512
C
E
A
± 0.152 (± 0.006)
1.52 (0.060)
1.91 (0.075)
3.06 (0.120)
3.81 (0.150)
5.08 (0.200)
6.30 (0.248)
B
D
B
± 0.127 (± 0.005)
0.85 (0.033)
1.27 (0.050)
1.60 (0.063)
1.32 (0.052)
2.54 (0.100)
3.30 (0.129)
C
± 0.127 (+ 0.005)
0.5 (0.020)
SUGGESTED LAND PATTERN in millimeters (inches) (to IPC-7351A)
Gmin.
D/E
± 0.127 (± 0.005)
0.38 (0.015)
0.40 (0.016)
0.48 (0.019)
Zmax.
Xmax.
CASE SIZE
0603
Zmax.
2.37 (0.093)
Gmin.
0.35 (0.014)
Xmax.
0.98 (0.039)
0805
2.76 (0.109)
0.74 (0.029)
1.40 (0.055)
1206
3.91 (0.154)
1.85 (0.073)
1.73 (0.068)
1505
4.66 (0.183)
2.44 (0.096)
1.45 (0.057)
2010
5.93 (0.233)
3.71 (0.146)
2.67 (0.105)
2512
7.15 (0.281)
4.93 (0.194)
3.43 (0.135)
Option: Enlarged Terminations: 0063
For stringent and special power dissipation requirements, the thermal resistance between the resistive layer and the solder joint
can be reduced using enlarged terminations chip resistors which are soldered on large and thick copper pads acting as heat
sinks (see application note: “Power Dissipation in High Precision Vishay Sfernice Chip Resistors and Arrays (P Thin Film, PRA
Arrays, CHP Thick Film)”: www.vishay.com/doc?53048).
For enlarged terminations: Please consult Vishay Sfernice.
Option: AEC-Q200 withstanding
Please order option 0058.
Revision: 04-Sep-14
2 Document Number: 53018
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

www.vishay.com
POWER DERATING CURVE
100
80
60
40
20
0
0 20 40 60 70 80 100 120 140 155
Ambient Temperature in °C
PACKAGING RULES
Waffle Pack
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered exceeds maximum quantity of a
single waffle pack, the waffle packs are stacked up on the
top of each other and closed by one single cover.
To get “not stacked up” waffle pack in case of ordered
quantity > maximum number of pieces per package:
Please consult Vishay/Sfernice for specific ordering
code.
PERFORMANCE
TESTS
Thermal shock
Short time overload
Low temperature operation
Resistance to solder heat
Moisture resistance
High temperature
Load life
CONDITIONS
MIL-R-55342 C
MIL-STD-702, method 107
MIL-R-55342 C
PARA 3.10.4.7.5
MIL-R-55342 C
PARA 3.9 and 4.7.4
MIL-R-55342 C
PARA 3.12, 4.7.7, 4.7.1.2
MIL-R-55342 C
PARA 3.13 and 4.7.8
MIL-STD-202, method 106
AEC-Q200
85 °C/85 % RH/0.1 Pn
1000 h
MIL-R-55342 C
PARA 3.11 and 4.7.6
MIL-R-55342 C
2000 h Pn at 70 °C
MIL-STD-202, method 108
L
Vishay Sfernice
PACKAGING
Several types of packaging are proposed: waffle-pack and
tape and reel
SIZE
0603
0805
1206
1505
2010
2512
MOQ
100
NUMBER OF PIECES
PER PACKAGE
WAFFLE PACK TAPE AND REEL
2" × 2"
MIN. MAX.
5000
100
140 4000
100
60
2000
50
TAPE
WIDTH
8 mm
Tape and Reel
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered is between the MOQ and the
maximum reel capacity, only one reel is provided.
When several reels are needed for ordered quantity
within MOQ and maximum reel capacity: Please consult
Vishay Sfernice for specific ordering code.
VALUES AND DRIFT
MIL-R-55342
REQUIREMENTS
TYPICAL
PERFORMANCES
± 0.25 %
± 0.02 %
± 0.10 %
± 0.01 %
± 0.25 %
± 0.01 %
± 0.25 %
± 0.04 %
± 0.40 %
± 0.01 %
-
± 0.20 %
± 0.50 %
Max. < 0.5 % + 0.05
± 0.075 %
± 0.15 %
Revision: 04-Sep-14
3 Document Number: 53018
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

www.vishay.com
L
Vishay Sfernice
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: L0805K1R00FBT0099
L0 8 0 5K1R0 0FBT0 0 9 9
GLOBAL
MODEL
L
SIZE
0603
0805
1206
1505
2010
2512
TCR VALUE
H = ± 50 ppm
K = ± 100 ppm
L = ± 200 ppm
M = ± 300 ppm
R designated
decimal point
For values under 1R
if 3 significant digits:
Rxxx
if 2 significant digits:
xRxx
Historical Part Number example: L 0805 K 1R00 1 % B T R0099
TOLERANCE
F=±1%
G=±2%
H=±3%
J=±5%
K = ± 10 %
TERMINATION PACKAGING OPTION
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: Gold over
nickel barrier
For more
information see
Codification of
Packaging
table
Leave
blank if
no
option
B: Lead bearing version
N and G: Lead (Pb)-free/
RoHS version
L
0805
K
1R00
1%
B
T R0099
MODEL
SIZE
TCR
VALUE
TOLERANCE TERMINATION PACKAGING
OPTION
CODIFICATION OF PACKAGING
CODE 18
PACKAGING
WAFFLE PACK
W 100 min., 1 mult
WA 100 min., 100 mult (available only in size 1206)
PLASTIC TAPE (Standard for all sizes.)
T 100 min., 1 mult
TA 100 min., 100 mult
TB 250 min., 250 mult
TC 500 min., 500 mult
TD 1000 min., 1000 mult
TE 2500min., 2500 mult
TF Full tape (quantity depending on size of chips)
PAPER TAPE (Available for 0603, 0805, and 1206. Please consult Vishay Sfernice for other sizes.)
PT 100 min., 1 mult
PA 100 min., 100 mult
PB 250 min., 250 mult
PC 500 min., 500 mult
PD 1000 min., 1000 mult
PE 2500min., 2500 mult
PF Full tape (quantity depending on size of chips)
Revision: 04-Sep-14
4 Document Number: 53018
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1 Document Number: 91000