L11767.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 L11767 데이타시트 다운로드

No Preview Available !

Red LED
L11767
High output power red emitting diode
The L11767 is a high output red LED that delivers light output more than twice that of our previous products. Electric power
required to provide the same brightness as the previous products is reduced by as much as 70%. The L11767 also offers
high reliability since it is a 4-element (AlGaInP) LED.
Features
High radiant output power (more than twice compared to previous products)
13 mW (IF=20 mA typ.)
High reliability
Applications
Optical switches, etc.
Absolute maximum ratings (Ta=25 °C unless otherwise noted)
Parameter
Symbol
Condition
Value
Unit
Reverse voltage
Forward current
Derating rate of forward
current
VR
IF
Ta > 25 °C
5V
60 mA
0.8 mA/°C
Pulse forward current
IFP
Pulse width=10 μs
Duty ratio=1%
0.5 A
Derating rate of pulse
forward current
Ta > 25 °C
6.7 mA/°C
Power dissipation
P
180 mW
Operating temperature
Topr
-30 to +85
°C
Storage temperature
Tstg *1
-40 to +100
°C
Soldering condition
-
Less than 260 °C, within 5 seconds *2
-
*1: Guaranteed to resist temperature cycle test of up to 5 cycles
*2: At a position at least 1 mm away from the lead base
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.
Electrical and optical characteristics (Ta=25 °C)
Parameter
Symbol
Condition
Min.
Peak emission wavelength λp IF=20 mA
Spectral half-width
Δλ IF=20 mA
Forward voltage
VF IF=20 mA
650
-
-
Reverse current
Radiant ux
Cutoff frequency*3
IR VR=5 V
φe IF=20 mA
fc IF=20 mA ± 1 mAp-p
-
10
3
*3: Frequency at which the light output drops by 3 dB relative to the output at 100 kHz
Typ.
660
18
2.1
-
13
6
Max.
670
30
2.5
20
-
-
Unit
nm
nm
V
μA
mW
MHz
www.hamamatsu.com
1

No Preview Available !

Red LED
L11767
Emission spectrum
100
(Typ. Ta=25 °C, IF=20 mA)
Radiant flux vs. forward current
1000
(Typ. Ta=25 °C, tw=100 μs, 0.1%)
80
100
60
40
10
20
0
600 620 640 660 680 700
Wavelength (nm)
KLEDB0344EA
1
10 100 1000
Forward current (mA)
KLEDB0345EC
Forward current vs. forward voltage
1000
(Typ. Ta=25 °C, tw=100 μs, 0.1%)
100
10
Directivity
20° 10° 0° 10° 20°
(Typ. Ta=25 °C)
30° 30°
40° 40°
50° 50°
60° 60°
70° 70°
80° 80°
90° 90°
100 80 60 40 20 0 20 40 60 80 100
Relative light output (%)
1
123456
Forward voltage (V)
KLEDB0346EB
Excluding light reflected from base
KLEDB0348EA
2

No Preview Available !

Red LED
L11767
Light output vs. ambient temperature
3 (Typ. IF=20 mA)
2
1
0
-1
-2
-3
-4
-5
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
KLEDB0347EA
Allowable forward current vs. duty ratio
1000
(Ta=25 °C)
Pulse width=1 μs
Pulse width=10 μs
Allowable forward current vs. ambient temperature
100
80
60
40
20
0
-40 -20
0
20 40 60 80 100
Ambient temperature (°C)
KLEDB0027EC
Pulse width=100 μs
100
10
0.01
0.1 1 10
Duty ratio (%)
100
KLEDB0349EB
3

No Preview Available !

Red LED
L11767
Dimensional outline (unit: mm)
ϕ5.4 ± 0.1
Clear epoxy resin ϕ4.2 ± 0.1
ϕ0.45
lead
ϕ2.54 ± 0.2
Common to case
KLEDA0009ED
Related information
www.hamamatsu.com/sp/ssd/doc_en.html
Precautions
Disclaimer
Metal, ceramic, plastic products
Information described in this material is current as of November, 2015.
Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the
information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always
contact us for the delivery specification sheet to check the latest specifications.
The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that
one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use.
Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741
China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866
Cat. No. KLED1059E03 Nov. 2015 DN
4