K0339_A.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 K0339_A 데이타시트 다운로드

No Preview Available !

K0339_A Metric
Indexing Plungers pull knob, Style A, metric
Item description/product images
Drawings
Description
Material:
- Steel version, locking pin hardened:
quality class 5.8
- Stainless steel version, locking pin hardened:
threaded sleeve 1.4305
locking pin 1.4034
- Stainless steel version, locking pin not hardened:
threaded sleeve 1.4305
locking pin 1.4305
Mushroom knob in black gray thermoplastic
Version:
- Steel version, locking pin hardened:
black oxide finish, locking pin ground
- Stainless steel version, locking pin hardened:
natural finish, locking pin ground
- Stainless steel version, locking pin not hardened:
natural finish, locking pin ground
Note:
Indexing plungers are used to prevent any change in locking position due to lateral
forces. A new locking position can only be set after the pin has been manually
disengaged.
Style C or D is recommended for applications in which the pin is disengaged over
extended periods and should be prevented from springing back.
On request:
Special versions and spacer rings.
© KIPP Inc.
www.kippusa.com · information@kipp.com 1/2

No Preview Available !

K0339_A Metric
Indexing Plungers pull knob, Style A, metric
Item No. Steel Item No. Stainless Item No. Stainless Style D D1 D2 L L1 L2 L3 H SW1 F x 30°
hardened
steel hardened steel not hardened
K0339.1105
K0339.1206
K0339.1308
K0339.1410
K0339.01105
K0339.01206
K0339.01308
K0339.01410
K0339.11105
K0339.11206
K0339.11308
K0339.11410
A 5 M10x1 21 47 17 7 15 5 13
A 6 M12x1,5 25 56 20 8 17 6 14
A 8 M16x1,5 33 74 26 10 23 8 19
A 10 M20x1,5 33 80 28 12 25 10 22
1,3
1,8
2,3
2,8
Spring force
initial pressure
F1 approx. N
5
6
15
15
Spring force
final pressure
F2 approx. N
12
14
35
34
© KIPP Inc.
www.kippusa.com · information@kipp.com 2/2