CL31B106KPHN3NE.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 CL31B106KPHN3NE 데이타시트 다운로드

No Preview Available !

SPECIFICATION
Supplier : Samsung electro-mechanics
Product : Multi-layer Ceramic Capacitor
A. Samsung Part Number
Samsung P/N : CL31B106KPHN3NE
Description : CAP, 10, 10V, ±10%, X7R, 1206
CL 31 B 106 K P H N 3 N E
① ②③ ④ ⑤⑥⑦⑧⑨⑩⑪
Series
Size
Samsung Multi-layer Ceramic Capacitor
1206 (inch code)
L: 3.2 ± 0.2
mm
W: 1.6 ± 0.2 mm
Dielectric
Capacitance
Capacitance
tolerance
Rated Voltage
Thickness
X7R
10
±10 %
10 V
1.6 ± 0.2 mm
Inner electrode
Termination
Plating
Product
Special
Packaging
Ni
Cu
Sn 100% (Pb Free)
DC-Bias Improved product
Reserved for future use
Embossed Type, 7" reel
B. Samsung Reliablility Test and Judgement condition
Capacitance
Tan δ (DF)
Insulation
Resistance
Appearance
Withstanding
Voltage
Temperature
Characterisitcs
Adhesive Strength
of Termination
Bending Strength
Solderability
Performance
Test condition
Within specified tolerance
1±10%
1.0±0.2Vrms
0.1 max.
10,000Mohm or 100Mohm
Rated Voltage 60~120 sec.
Whichever is Smaller
No abnormal exterior appearance
Microscope (×10)
No dielectric breakdown or
250% of the rated voltage
mechanical breakdown
X7R
(From -55to 125, Capacitance change shoud be within ±15%)
No peeling shall be occur on the
500gF, for 10±1 sec.
terminal electrode
Capacitance change : within ±12.5% Bending to the limit (1mm)
with 1.0mm/sec.
More than 75% of terminal surface
SnAg3.0Cu0.5 solder
is to be soldered newly
245±5, 3±0.3sec.
(preheating : 80~120for 10~30sec.)
Resistance to
Soldering heat
Capacitance change : within ±7.5% Solder pot : 270±5, 10±1sec.
Tan δ, IR : initial spec.

No Preview Available !

Vibration Test
Moisture
Resistance
Performance
Test condition
Capacitance change : within ±5% Amplitude : 1.5mm
Tan δ, IR : initial spec.
From 10to 55(return : 1min.)
2hours × 3 direction (x, y, z)
Capacitance change : within ±12.5% With rated voltage
Tan δ : 0.125 max
40±2, 90~95%RH, 500+12/-0hrs
IR : 12.5·or Over
High Temperature
Resistance
Temperature
Cycling
Capacitance change : within ±12.5%
Tan δ : 0.125 max
IR : 25·or Over
Capacitance change : within ±7.5%
Tan δ, IR : initial spec.
With 150% of the rated voltage
Max. operating temperature
1000+48/-0hrs
1 cycle condition
Min. operating temperature25
Max. operating temperature 25
5 cycle test
C. Recommended Soldering method :
Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max )
* For the more detail Specification, Please refer to the Samsung MLCC catalogue.