P0430WQLD-T.pdf 데이터시트 (총 19 페이지) - 파일 다운로드 P0430WQLD-T 데이타시트 다운로드

No Preview Available !

Document No.:
Tentative Product Specification
Module name: P0430WQLD-T
Issue date: 2008/11/21
Version: 1.4
Customer
Approved by Customer
PD Division
Approved by CMEL
ENG Division
QA Dept
Note:
1. The information contained herein may be change without prior notice. It is therefore advisable to contact CHI MEI EL
Corp. before designed your product based on this specification.
2. This tentative product specification is for reference, some item or setting maybe changed for evaluation.
1

No Preview Available !

Reversion History
Version
Date
Ver.1.0 2008/09/02
Ver.1.1 2008/09/11
Ver.1.2 2008/09/25
Ver.1.3 2008/10/02
Ver.1.4 2008/11/21
Document No.:
Page
All
18
3
19
9
Description
Tentative specification was first issued
Add test and measurement conditions
Add Weight of Mechanical Data
Modify Package Drawing
Modify Life Time
2

No Preview Available !

Document No.:
1. Purpose:
This documentation defines general product specification for OLED module supplied by
CMEL. The information described in this technical specification is tentative. Please Contact
CMEL’s representative while your product is modified.
2. General Description:
Driving Mode: Active Matrix
Color Mode: Full Color (16M color)
Driver IC: HX5116, COG Assembly
Interface:
8bit serial RGB and 24bit parallel RGB interface
Application: Portable DVD, PMP, GPS, Photo Frame etc.
3. Mechanical Data:
No. Items
1 Diagonal Size
2 Resolution
3 Pixel Pitch
4 Active Area
5 Outline Area
6 Thickness
7 Weight
Specification
4.3
480 x RGB x 272
H: 0.198 V: 0.198
95.0 x 53.8
103.5 x 67
2.05
TBD
Unit
Inch
um
mm
mm
mm
g
4. Maximum ratings:
Symbol
Parameter
Value
Unit
VCC
Logic Supply Voltage
-0.3 to +3.6
V
VCI Analog Supply Voltage
-0.3 to +3.6
V
Tstg Storage Temperature
-40 to +85
Table 7.1 Maximum ratings
Maximum ratings are those values beyond which damages to the device may
occur. Functional operation should be restricted to the limits in the Electrical
Characteristics tables or Pin Description section. Unused outputs must be left
open.
3

No Preview Available !

5. Electrical Characteristic:
Document No.:
DC Characteristic
DC Characteristics
(Unless otherwise specified, Voltage Referenced to VSS = 0V, VCC = 1.5 to 3.6V, TA = -20 to 70C)
Parameter
Symbol
Test condition
Min. Typ. Max. Unit
System power supply pins of the
VCC - 1.5 - 3.6 V
logic block
Booster Reference Supply Voltage
Range
VCI
- 3.0 - 3.6 V
DDVDH Output Voltage 1
DDVDH
Set CP1X=0
4.9 5.1 5.3 V
DDVDH Output Voltage 2
DDVDH
Set CP1X=1
5.8 6.0 6.2 V
VGAM1OUT Output Voltage 1
VGAM1OUT
Set CP1X=0
4.7 4.8 4.9 V
VGAM1OUT Output Voltage 2
VGAM1OUT
Set CP1X=1
5.7 5.8 5.9 V
Gate driver High Output Voltage
VGH
-
+3 - +8 V
Gate driver Low Output Voltage
VGL
-
-8 - -3 V
OLED Diode Refer Voltage
ARREF
-
-8 - +8 V
Logic High Output Voltage
VOH
Iout=-400µA
0.8 * VCC
-
VCC
V
Logic Low Output Voltage
VOL
Iout=400µA
0 - 0.2 * VCC V
Logic High Input voltage
VIH
0.8 * VCC
-
VCC
V
-
Logic Low Input voltage
VIL
0 - 0.2 * VCC V
Logic Input Current
IIL/IIH
No pull up or pull low
-1
-
1 µA
Pull high resistance
RH
Pull up pins
600 900 1200 K
Pull low resistance
RL
Pull low pins
600 900 1200 K
High Output Current
S1~S107,
IOH 50 -
Vo=4.9V vs. 4V
- µA
Low Output Current
S1~S107,
IOL - - -50 µA
Vo=0.1V vs. 1V
Output leakage Current
IOZ - -1 - 1 µA
Output voltage offset
S1~S107,
VOS
±10 mV
Vo=0.1V~DDVDH-0.1V
S1~S107,
Output voltage deviation
VOD
±10 mV
Vo=0.1V~DDVDH-0.1V
Analog standby current
ISTB
VCI=3.0V,
Stand by mode
- 10 uA
Analog operating current
IVCI
VCI=3.0V,
S1~S160 no load
- 20 mA
Logic Pins Input Capacitance
CIN
-
- 5 7.5 pF
4

No Preview Available !

AC Characteristic
AC Electrical Characteristics
Document No.:
5