CSA2D.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 CSA2D 데이타시트 다운로드

No Preview Available !

www.vishay.com
CSA2D, CSA2G, CSA2J, CSA2K, CSA2M
Vishay General Semiconductor
Surface Mount Glass Passivated Rectifier
DO-214AC (SMA)
PRIMARY CHARACTERISTICS
IF(AV)
2.0 A
VRRM
200 V, 400 V, 600 V, 800 V, 1000 V
IFSM
50 A
IR
VF at IF = 2.0 A (TA = 125 °C)
5.0 μA
0.90 V
TJ max.
150 °C
Package
DO-214AC (SMA)
Diode variations
Single die
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated pallet chip junction
• Low forward voltage drop
• Low leakage current
• High forward surge capability
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies,
inverters, converters, and freewheeling diodes for
consumer, and telecommunication.
MECHANICAL DATA
Case: DO-214AC (SMA)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL CSA2D
Device marking code
D2
Maximum repetitive peak reverse voltage
Average forward rectified current
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
VRRM
IF(AV) (1)
IF(AV) (2)
IFSM
200
Operating junction and storage temperature range
TJ, TSTG
Notes
(1) Free air, mounted on recommended copper pad area
(2) Mounted on 14 mm x 14 mm copper pad areas
CSA2G
G2
400
CSA2J
J2
600
1.6
2.0
50
CSA2K
K2
800
CSA2M
M2
1000
-55 to +150
UNIT
V
A
A
°C
Revision: 15-Jan-16
1 Document Number: 87638
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

www.vishay.com
CSA2D, CSA2G, CSA2J, CSA2K, CSA2M
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
Maximum instantaneous forward voltage
Maximum DC reverse current at rated DC
blocking voltage
Typical reverse recovery time
Typical junction capacitance
IF = 1.0 A
IF = 2.0 A
TA = 25 °C
IF = 1.0 A
IF = 2.0 A
TA = 125 °C
Rated VR
TA = 25 °C
TA = 125 °C
IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A
4.0 V, 1 MHz
VF (1)
IR (2)
trr
CJ
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: pulse width 40 ms
TYP.
0.92
0.99
0.81
0.90
-
-
2.1
11
MAX.
-
1.15
-
0.98
5.0
350
-
-
UNIT
V
μA
μs
pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL CSA2D
CSA2G
CSA2J
CSA2K
Typical thermal resistance
RJA(1)
RJM (2)
102
14
Notes
(1) Free air, mounted on recommended copper pad area; thermal resistance RJA - junction to ambient
(2) Mounted on 14 mm x 14 mm copper pad areas, RJM - junction to mount at the terminal
CSA2M
UNIT
°C/W
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE
CSA2J-E3/I
0.064
I
BASE QUANTITY
7500
DELIVERY MODE
13" diameter plastic tape and reel
Revision: 15-Jan-16
2 Document Number: 87638
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

www.vishay.com
CSA2D, CSA2G, CSA2J, CSA2K, CSA2M
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0 RthJA = 102 ƱC/W
0.8
0.6
0.4 RthJM = 14 ƱC/W Mounted on
0.2 14 mm x 14 mm copper pad areas
0
0 25 50 75 100 125 150
Mount Temperature (°C)
Fig. 1 - Maximum Forward Current Derating Curve
1000
100
10
1
0.1
TJ = 150 °C
TJ = 125 °C
TJ = 75 °C
TJ = 25 °C
0.01
10 20 30 40 50 60 70 80 90 100
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Reverse Leakage Characteristics
2.4
D = 0.5 D = 0.8
2.0 D = 0.3
D = 0.2
1.6 D = 0.1
D = 1.0
1.2
0.8
T
0.4
D = tp/T
tp
0.0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2
Average Forward Current (A)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
1
0.1 1 10
Reverse Voltage (V)
Fig. 5 - Typical Junction Capacitance
100
100
10
TJ = 150 °C
1 TJ = 125 °C
TJ = 75 °C
0.1
TJ = 25 °C
0.01
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
Instantaneous Forward Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
1000
100
Junction to Ambient
10
1
0.01 0.1 1 10 100 1000
t - Pulse Duration (s)
Fig. 6 - Typical Transient Thermal Impedance
Revision: 15-Jan-16
3 Document Number: 87638
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

www.vishay.com
CSA2D, CSA2G, CSA2J, CSA2K, CSA2M
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AC (SMA)
Cathode Band
Mounting Pad Layout
0.065 (1.65)
0.049 (1.25)
0.110 (2.79)
0.100 (2.54)
0.066 (1.68)
MIN.
0.074 (1.88)
MAX.
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.177 (4.50)
0.157 (3.99)
0.012 (0.305)
0.006 (0.152)
0.060 (1.52)
MIN.
0.208 (5.28)
REF.
0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)
Revision: 15-Jan-16
4 Document Number: 87638
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1 Document Number: 91000