D75JFT80V.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 D75JFT80V 데이타시트 다운로드

No Preview Available !

SIP
D75JFT80V
800V 75A
Bridge Diode
OUTLINE
Package JF
45.7
SHINDENGEN
75JFT80
B0000
Unit : mm
7.5
Feature
10.6 7.6 7.6 10.6
① ②③④ ⑤
RATINGS
Absolute Maximum Ratings
For details of the outline dimensions, refer to our web site. As for the
marking, refer to the specification “Marking, Terminal Connection”.
Item
Storage Temperature
Operating Junction Temperature
Repetitive Peak Reverse Voltage
Average Forward Current
Peak Surge Forward Current
Current Squared Time
Dielectric Strength
Mounting Torque
Symbol
Conditions
Tstg
Tj
VRRM
IF(AV)
IFSM
IFSM1
I2t
50Hz, Sine wave, Resistance load, With heatsink, Tc=109
50Hz, Sine wave, Resistance load, Without heatsink, Ta=25
50Hz, Sine wave, Non-repetitive 1cycle peak value, Rating of per diode, Tj=25
tp=1ms, Rating of per diode, Tj=25 , Non-repetitive
1ms t 10ms, Rating of per diode
Vdis
TOR
Terminals to case, AC 1minute.
Except top (opposite side of the terminal side) of the mold case
(Recommended torque 1.2N m)
Ratings
Unit
Forward Voltage
Reverse Current
Thermal Resistance
Electrical Characteristics
VF IF=25A, Pulse measurement, Rating of per diode
IR VR=800V, Pulse measurement, Rating of per diode
RTH(j-c) Junction to case, With heatsink
RTH(j-a) Junction to ambient, Without heatsink
www.shindengen.co.jp/product/semi/

No Preview Available !

CHARACTERISTIC DIAGRAMS
D75JFT80V
www.shindengen.co.jp/product/semi/
50Hz sine wave is used for measurements.

No Preview Available !

ご注意
1. ご採用に際しては、別途仕様書をご請求の上、ご確認をお願いいたします。
2. 本資料に記載されている当社製品の品質水準は、一般的な信頼度が要求される標準用途を意図しています。
その製品の故障や誤動作が直接生命や人体に影響を及ぼすような極めて高い品質、信頼度を要求される特
別、特定用途の機器、装置にご使用の場合には必ず事前に当社へご連絡の上、確認を得て下さい。 当社の
製品の品質水準は以下のように分類しております。
【標準用途】
コンピュータ、OA 等の事務機器、通信用端末機器、計測器、AV 機器、アミューズメント機器、家電、
工作機器、パーソナル機器、産業用機器等
【特別用途】
輸送機器(車載、船舶等)、基幹用通信機器、交通信号機器、防災/防犯機器、各種安全機器、医療
機器等
【特定用途】
原子力制御システム、航空機器、航空宇宙機器、海底中継機器、生命維持のための装置、システム
3. 当社は品質と信頼性の向上に絶えず努めていますが、必要に応じ、安全性を考慮した冗長設計、延焼防止
設計、誤動作防止設計等の手段により結果として人身事故、火災事故、社会的な損害等が防止できるようご
検討下さい。
4. 本資料に記載されている内容は、製品改良などのためお断りなしに変更することがありますのでご了承下さ
い。製品のご購入に際しましては事前に当社または特約店へ最新の情報をご確認下さい。
5. 本資料の使用によって起因する損害または特許権その他権利の侵害に関しては、当社は一切その責任を負
いません。
6. 本資料によって第三者または当社の特許権その他権利の実施に対する保証または実施権の許諾を行うもの
ではありません。
7. 本資料に記載されている製品が、外国為替及び外国貿易管理法に基づき規制されている場合、輸出には同
法に基づく日本国政府の輸出許可が必要です。
8. 本資料の一部または全部を当社に無断で転載または複製することを堅くお断りいたします。

No Preview Available !

Notes
1. If you wish to use any such product, please be sure to refer to the specifications issued by Shindengen.
2. All products described or contained herein are designed with a quality level intended for use in standard
applications requiring an ordinary level of reliability. If these products are to be used in equipment or devices
for special or specific applications requiring an extremely high grade of quality or reliability in which failures or
malfunctions of products may directly affect human life or health, a local Shindengen office must be contacted
in advance to confirm that the intended use of the product is appropriate. Shindengen products are grouped
into the following three applications according the quality grade.
【Standard applications】
Computers, office automation and other office equipment, communication terminals, test and
measurement equipment, audio/visual equipment, amusement equipment, consumer electronics,
machine tools, personal electronic equipment, industrial equipment, etc.
【Special applications】
Transportation equipment (vehicles, ships, etc.), trunk-line communication equipment, traffic signal
control systems, anti-disaster/crime systems, safety equipment, medical equipment, etc.
【Specific applications】
Nuclear reactor control systems, aircraft, aerospace equipment, submarine repeaters, life support
equipment and systems, etc.
3. Although Shindengen continuously endeavors to enhance the quality and reliability of its products, customers
are advised to consider and take safety measures in their design, such as redundancy, fire containment and
anti-failure, so that personal injury, fires, or societal damages can be prevented.
4. Please note that all information described or contained herein is subject to change without notice due to
product upgrades and other reasons. When buying Shindengen products, please contact the Company’s
offices or distributors to obtain the latest information.
5. Shindengen shall not bear any responsibility with regards to damages or infringement of any third-party patent
rights and other intellectual property rights incurred due to the use of information on this website.
6. The information and materials on this website neither warrant the use of Shindengen's or any third party’s
patent rights and other intellectual property rights, nor grant license to such rights.
7. In the event that any product described or contained herein falls under the category of strategic products
controlled under the Foreign Exchange and Foreign Trade Control Law of Japan, exporting of such products
shall require an export license from the Japanese government in accordance with the above law.
8. No reprinting or reproduction of the materials on this website, either in whole or in part, is permitted without
proper authorization from Shindengen.