AK6-190C.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 AK6-190C 데이타시트 다운로드

No Preview Available !

JIEJIE MICROELECTRONICS CO. , Ltd
AK Series 6000A Transient Voltage Suppressor
DESCRIPTION:
The AK6 series of high current bidirectional transient
suppressors are designed for A.C. line protection and high
power DC bus clamping applications. These devices offer
bidirectional port protection from 15 volts to 430 volts.
They provide a clamping voltage lower than the avalanche
voltage. Therefore, any voltage rise due to increased
current conduction is contained to a minimum, providing
the best possible protection level. They can also be
connected in series and/or parallel to create very high
capacity protection solutions.
Rev.1.0
FEATURES:
Halogen-free
Bi-directional
RoHS compliant
Low slope resistance
Very low clamping voltage
Sharp breakdown voltage
Glass Passivated Junction for reliability
Foldback technology for superior clamping factor
High temperature soldering: 260/10s at terminals
Symbol
ABSOLUTE MAXIMUM RATINGS (TA=25ºC, RH=45%-75%, unless otherwise noted)
Parameter
Symbol
Value
Peak Current Rating per 8/20 μs IEC
61000-4-5
IPP
6
Operating Junction Temperature Range
TJ
-55 to +150
Operating Storage Temperature Range TS -55 to +150
Unit
KA
TEL+86-513-83639777
- 1 / 5-
http://www.jjwdz.com

No Preview Available !

6000A AK6 Series
JieJie Microelectronics CO. , Ltd
ELECTRICAL CHARACTERISTICS (TA=25)
Part Number
VR
VBR@IT
IT IR@VR Vc@Ipp Ipp
Bi-Polar
V Min (V) Max (V) μA
μA
VA
AK6-015C
15 17
19 10 20
28 6000
AK6-020C
20 22
24 10 20
50 6000
AK6-025C
25 28
30 10 20
60 6000
AK6-030C
30 33
37 10 20
80 6000
AK6-042C
42 47
51 10 20
105 6000
AK6-058C
58 64
70 10 20
110 6000
AK6-066C
66 72
80 10 20
120 6000
AK6-076C
76 85
95 10 20
140 6000
AK6-100C
100 110
122 10 20
165 6000
AK6-133C
133 147
162 10 20
220 6000
AK6-170C
170 180
205 10 20
260 6000
AK6-190C
190 200
245 10 20
290 6000
AK6-240C
240 250
285 10 20
340 6000
AK6-275C
275 300
335 10 20
435 6000
AK6-300C
300 330
366 10 20
470 6000
AK6-380C
380 401
443 10 20
520 6000
AK6-430C
430 440
490 10 20
625
Surge waveform: 8/20μs
VR Stand-off Voltage -- Maximum voltage that can be applied
VBRBreakdown Voltage
VCClamping Voltage -- Peak voltage measured across the suppressor at a specified Ipp
IRReverse Leakage Current
6000
TEL+86-513-83639777
- 2 / 5-
http://www.jjwdz.com

No Preview Available !

6000A AK6 Series
JieJie Microelectronics CO. , Ltd
RATINGS AND V-I CHARACTERISTICS CURVES (TA=25ºC, unless otherwise noted)
FIG.1:V- I Curve Characteristics (Bi-directional)
FIG.2: Typical VBR Vs Junction Temperature
IPP
VC VBR VR
IT
IR
IR
IT
V
VR VBR VC
12
10
8
6
4
2
0
-2
-4
-6
-8
-50 -25 0 25 50 75 100 125
IPP
FIG.3: Pulse waveform
IPPM(%IRSM)
150
tr=8μs
tr = rise time to peak value
td = decay time to half value
100
Peak value
Half value
50
td
00 20
t(μs)
40
60
80
Junction Tempurature (TJ)
FIG.4: Pulse derating curve
PPP derating in percentage(%)
100
80
60
40
20
0 TA()
0 25 50 75 100 125 150 175
SOLDERING PARAMETERS
Reflow Condition
Pre
Heat
-Temperature Min (Ts(min))
-Temperature Max(Ts(max))
-Time (Min to Max) (ts)
Average ramp up rate (Liquid us Temp
(TL) to peak)
Ts(max) to TL - Ramp-up Rate
Reflow -Temperature(TL)(Liquid us)
-Temperature(tL)
Peak Temp (Tp)
Time within 5of actual Peak Temp (tp)
Ramp-down Rate
Time 25to Peak Temp (TP)
Do not exceed
Pb-Free assembly
(see FIG.5)
+150
+200
60-180 secs.
3/sec. Max
3/sec. Max
+217
60-150 secs.
+260(+0/-5)
30 secs. Max
6/sec. Max
8 min. Max
+260
FIG.5: Reflow condition
TP
TL
TS(max)
Ramp-up
TS(min)
Preheat
ts
tp
Critical Zone
TL to TP
tL
Ramp-down
25 time to peak temperatue
(t 25to peak)
Time
TEL+86-513-83639777
- 3 / 5-
http://www.jjwdz.com

No Preview Available !

6000A AK6 Series
PACKAGE MECHANICAL DATA
A
L2 G
L1
JieJie Microelectronics CO. , Ltd
F
B
Size A
Symbol
Inches
Millimeter
A 0.951±0.040 24.15±1.00
B 0.094±0.024 2.40±0.60
C 0.236±0.039 6.00±1.00
D 0.48 max 12.0max
E 0.050±0.002 1.27±0.05
F 0.48 max 12.0max
012C to 025C 0.20max
5.0max
030C to 042C 0.24max
6.0max
058C to 076C 0.32max
8.0max
G 100C to 133C 0.40max 10.0max
170C to 190C 0.48max 12.0max
240C to 300C 0.64max 16.0max
380C to 430C 0.80max 20.0max
L1/L2 L1=L2 tolerance ±0.047inch (±1.20 mm)
E
Size B
Symbol
Inches
Millimeter
A 0.630±0.020 16.00±0.50
B 0.094±0.024 2.40±0.60
C 0.236±0.039 6.00±1.00
D 0.48 max 12.0max
E 0.050±0.002 1.27±0.05
F 0.48 max 12.0max
012C to 025C 0.20max
5.0max
030C to 042C 0.24max
6.0max
058C to 076C 0.32max
8.0max
G 100C to 133C 0.40max 10.0max
170C to 190C
None
None
240C to 300C
None
None
380C to 430C
None
None
L1/L2 L1=L2 tolerance ±0.047inch (±1.20 mm)
Part Number
AK6-XXC
Case Type
AKS
Quantity
84pcs
Packing Option
Box
TEL+86-513-83639777
- 4 / 5-
http://www.jjwdz.com

No Preview Available !

6000A AK6 Series
MARKING ORDERING INFORMATION
JieJie Microelectronics CO. , Ltd
AK6-XXC
AK 6 - XX C
(1) (2) (3) (4)
(1) AK series
(2) IPP=6KA
(3) Reverse stand-off voltage
(4) Bi-directional
Information furnished in this document is believed to be accurate and reliable. However, Jiangsu
JieJie Microelectronics Co.,Ltd assumes no responsibility for the consequences of use without
consideration for such information nor use beyond it.
Information mentioned in this document is subject to change without notice, apart from that when
an agreement is signed, Jiangsu JieJie complies with the agreement.
Products and information provided in this document have no infringement of patents. Jiangsu
JieJie assumes no responsibility for any infringement of other rights of third parties which may
result from the use of such products and information.
This document is the first version which is made in 22-May.-2015. This document supersedes
and replaces all information previously supplied.
is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd.
Copyright ©2015 Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved.
TEL+86-513-83639777
- 5 / 5-
http://www.jjwdz.com