BZW04P213.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 BZW04P213 데이타시트 다운로드

No Preview Available !

BZW04P-5V8 THRU BZW04-376
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage - 5.8 to 376 Volts Peak Pulse Power - 400 Watts
DO204AL
0.107 (2.7)
0.080 (2.0)
DIA.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
NOTE: Lead diameter is 0.026 (0.66) for suffix "E" part numbers
0.023 (0.58)
Dimensions are in inches
and
(millimeters)
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Glass passivated chip junction
400W peak pulse power
capability with a 10/1000µs waveform,
repetition rate (duty cycle): 0.01%
Excellent clamping
capability
Low incremental surge resistance
Fast response time: typically less
than 1.0 ps from 0 Volts to V(BR) for uni-
directional and 5.0ns for bi-directional types
Typical ID less than 1µA above 10V rating
High temperature soldering guaranteed:
265°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3 kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AL molded plastic over passivated
junction
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: For unidirectional types the color band denotes
the cathode, which is postitive with respect to the anode
under normal TVS operation
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bi-directional use add suffix Letter "B" (e.g. BZW04P-6V4B).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Peak pulse power dissipation with a 10/1000µs waveform
(NOTE 1, FIG. 1)
Peak pulse current with a 10/1000µs waveform
(NOTE 1)
Steady state power dissipation at TL=75°C
lead lengths, 0.375” (9.5mm) (NOTE 2)
Peak forward surge current, 8.3ms single half
Sine-wave superimposed on rated load
(JEDEC Method) (NOTE 3) unidirectional only
Maximum instantaneous forward voltage at 25A
(NOTE 4) uni-directional only
SYMBOL
PPPM
IPPM
PM(AV)
IFSM
VF
VALUE
Minimum 400
SEE TABLE 1
1.0
40.0
3.5/5.0
Operating junction and storage temperature range
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
(3) 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
(4) VF=3.5V max. for devices of V(BR)220V and VF=5.0 Volt max. for devices of V(BR)>220V
TJ, TSTG
-55 to +175
1/5/98
UNITS
Watts
Amps
Watts
Amps
Volts
°C

No Preview Available !

ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1
Device Type
BZW04P5V8
BZW04-5V8
BZW04P6V4
BZW04-6V4
BZW04P7V0
BZW04-7V0
BZW04P7V8
BZW04-7V8
BZW04P8V5
BZW04-8V5
BZW04P9V4
BZW04-9V4
BZW0P10
BZW04-10
BZW04P11
BZW04-11
BZW04P13
BZW04-13
BZW04P14
BZW04-14
BZW04P15
BZW04-15
BZW04P17
BZW04-17
BZW04P19
BZW04-19
BZW04P20
BZW04-20
BZW04P23
BZW04-23
BZW04P26
BZW04-26
BZW04P28
BZW04-28
BZW04P31
BZW04-31
BZW04P33
BZW04-33
BZW04P37
BZW04-37
BZW04P40
BZW04-40
BZW04P44
BZW04-44
BZW04P48
BZW04-48
Breakdown Voltage
V(BR)
Volts (NOTE 1)
MIN MAX
6.45 7.48
6.45 7.14
7.13 8.25
7.13 7.88
7.79 9.02
7.79 8.61
8.65 10.0
8.65 9.55
9.50 11.0
9.50 10.5
10.5 12.1
10.5 11.6
11.4 13.2
11.4 12.6
12.4 14.3
12.4 13.7
14.3 16.5
14.3 15.8
15.2 17.6
15.2 16.8
17.1 19.8
17.1 18.9
19.0 22.0
19.0 21.0
20.9 24.2
20.9 23.1
22.8 26.4
22.8 25.2
25.7 29.7
25.7 28.4
28.5 33.0
28.5 31.5
31.4 36.3
31.4 34.7
34.2 39.6
34.2 37.8
37.1 42.9
37.1 41.0
40.9 47.3
40.9 45.2
44.7 51.7
44.7 49.4
48.5 56.1
48.5 53.6
53.2 61.6
53.2 58.8
Test
Current
at IT
(mA)
10.0
10.0
10.0
10.0
10.0
10.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Stand-off
Voltage
VWM
(Volts)
5.80
5.80
6.40
6.40
7.02
7.02
7.78
7.78
8.55
8.55
9.4
9.4
10.2
10.2
11.1
11.1
12.8
12.8
13.6
13.6
15.3
15.3
17.1
17.1
18.8
18.8
20.5
20.5
23.1
23.1
25.6
25.6
28.2
28.2
30.8
30.8
33.3
33.3
36.8
36.8
40.2
40.2
43.6
43.6
47.8
47.8
Maximum
Reverse
Leakage
at VWM
ID (µA)
(NOTE4)
1000
1000
500
500
200
200
50.0
50.0
10.0
10.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
Maximum
Peak Pulse
Current
IPPM
(Amps)
(NOTE 2)
38.0
38.0
35.4
35.4
33.0
33.0
30.0
30.0
27.6
27.6
25.7
25.7
24.0
24.0
22.0
22.0
19.0
19.0
17.8
17.8
16.0
16.0
14.5
14.5
13.0
13.0
12.0
12.0
10.7
10.7
9.6
9.6
8.8
8.8
8.0
8.0
7.4
7.4
6.7
6.7
6.2
6.2
5.7
5.7
5.2
5.2
Maximum
Clamping
Voltage at
IPPM
VC (Volts)
Maximum
Temperature
Coefficient
of V(BR)
(% / C)
10.5 0.057
10.5 0.057
11.3 0.061
11.3 0.061
12.1 0.065
12.1 0.065
13.4 0.068
13.4 0.073
14.5 0.073
14.5 0.075
15.6 0.075
15.6 0.075
16.7 0.078
16.7 0.078
18.2 0.081
18.2 0.081
21.2 0.084
21.2 0.084
22.5 0.086
22.5 0.086
25.2 0.088
25.2 0.088
27.7 0.090
27.7 0.090
30.6 0.092
30.6 0.092
33.2 0.094
33.2 0.094
37.5 0.096
37.5 0.096
41.5 0.097
41.5 0.097
45.7 0.098
45.7 0.098
49.9 0.099
49.9 0.099
53.9 0.100
53.9 0.100
59.3 0.101
59.3 0.101
64.8 0.101
64.8 0.101
70.1 0.102
70.1 0.102
77.0 0.103
77.0 0.103

No Preview Available !

ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1 (Cont’d)
Device Type
BZW04P53
BZW04-53
BZW04P58
BZW04-58
BZW04P64
BZW04-64
BZW04P70
BZW04-70
BZW04P78
BZW04-78
BZW04P85
BZW04-85
BZW04P94
BZW04-94
BZW04P102
BZW04-102
BZW04P110
BZW04-110
BZW04P128
BZW04-128
BZW04P136
BZW404-136
BZW04P145
BZW04-145
BZW04P154
BZW04-154
BZW04P171
BZW04-171
BZW04P188
BZW04-188
BZW04P213
BZW04-213
BZW04P239
BZW04-239
BZW04P256
BZW04-256
BZW04P273
BZW04-273
BZW04P299
BZW04-299
BZW04P342
BZW04-342
BZW04P376
BZW04-376
Breakdown Voltage
V(BR)
Volts (NOTE 1)
MIN MAX
58.9 68.2
58.9 65.1
64.6 74.8
64.6 71.4
71.3 82.5
71.3 78.8
77.9 90.2
77.9 86.1
86.5 100
86.5 95.5
95.0 110
95.0 105
105 121
105 116
114 132
114 126
124 143
124 137
143 165
143 158
152 176
152 168
161 187
161 179
171 198
171 189
190 220
190 210
209 242
209 231
237 275
237 263
266 308
266 294
285 330
285 315
304 352
304 336
332 385
332 368
380 440
380 420
418 484
418 462
Test
Current
at IT
(mA)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Stand-off
Voltage
VWM
(Volts)
53.0
53.0
58.1
58.1
64.1
64.1
70.1
70.1
78.0
78.0
85.5
85.5
94.0
94.0
102
102
111
111
128
128
136
136
145
145
154
154
171
171
188
188
213
213
239
239
256
256
273
273
299
299
342
342
376
376
Maximum
Reverse
Leakage
at VWM
ID (µA)
(NOTE4)
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
Maximum
Peak Pulse
Current
IPPM
(Amps)
(NOTE 2)
4.7
4.7
4.3
4.3
3.9
3.9
3.5
3.5
3.2
3.2
2.9
2.9
2.6
2.6
2.4
2.4
2.2
2.2
2.0
2.0
1.8
1.8
1.7
1.7
1.6
1.6
1.5
1.5
1.4
1.4
1.5
1.5
1.5
1.5
1.2
1.2
1.2
1.2
0.90
0.90
0.90
0.90
0.80
0.80
Maximum
Clamping
Voltage at
IPPM
VC (Volts)
85.0
85.0
92.0
92.0
103
103
113
113
125
125
137
137
152
152
165
165
179
179
207
207
219
219
234
234
246
246
274
274
301
301
344
344
384
384
414
414
438
438
482
482
548
548
603
603
Maximum
Temperature
Coefficient
of V(BR)
(% / C)
0.104
0.104
0.104
0.104
0.105
0.105
0.105
0.105
0.105
0.105
0.106
0.106
0.107
0.107
0.107
0.107
0.107
0.107
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
NOTES:
(1) V(BR) measured after IT applied for 300µs IT=square wave pulse or equivalent
(2) Surge current waveform per Fig. 3 and derated per Fig. 2
(3) All terms and symbols are consistent with ANSI/IEEE C62.35
(4) For bi-directional devices with VWM of 10 Volts and less, the ID limit is doubled

No Preview Available !

RATINGS AND CHARACTERISTIC CURVES BZW04P5V8 THRU BZW04-376
100
10
FIG. 1 - PEAK PULSE POWER RATING CURVE
NON-REPETITIVE
PULSE WAVEFORM
SHOWN in FIG. 3
TA=25°C
FIG. 2 - PULSE DERATING CURVE
100
75
1.0 50
0.1
0.1µs
150
100
50
1.0µs 10µs 100µs
td, PULSE WIDTH, sec.
1.0ms
FIG. 3 - PULSE WAVEFORM
tr=10µsec.
PEAK VALUE
IPPM
TA=25°C
PULSE WIDTH (td) is
DEFINED as the POINT
WHERE the PEAK
CURRENT DECAYS
to 50% of IPP
HALF VALUE - IPP
2
10/1000µsec. WAVEFORM
AS DEFINED BY R.E.A.
10ms
td
0
0 1.0 2.0 3.0
t, TIME, ms
4.0
1.00
0.75
FIG. 5 - STEADY STATE POWER DERATING CURVE
L = 0.375”(9.5mm)
LEAD LENGTH
60 HZ
RESISTIVE OR INDUCTIVE LOAD
0.50
0.25
1.6 x 1.6 x 0.040"
(40 x 40 x 1mm.)
COPPER HEAT SINKS
0
0 25 50 75 100 125 150 175 200
TL, LEAD TEMPERATURE,°C
FIG. 7-TYPICAL REVERSE LEAKAGE CHARACTERISTICS
100
MEASURED at
DEVICES
10
STAND-OFF
VOLTAGE, VWM
TA=25°C
1
0.1
0.01
0
100 200 300 400
V(BR), BREAKDOWN VOLTAGE, VOLTS
500
25
0
0 25 50 75 100 125 150 175 200
TA, AMBIENT TEMPERATURE, °C
100,000
FIG. 4 - TYPICAL JUNCTION CAPACITANCE
UNIDIRECTIONAL
TJ=25°C
f=1.0 MHz
Vsig=50mVp-p
10,000
MEASURED at
ZERO BIAS
1000
MEASURED at
STAND-OFF
VOLTAGE, VWM
10
1.0 10 100 200
V(BR), BREAKDOWN VOLTAGE, VOLTS
FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT UNIDIRECTIONAL
50
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
TJ=TJ max.
40
30
20
10
0
1 10 100
NUMBER OF CYCLES AT 60 HZ