R0964LC12C.pdf 데이터시트 (총 12 페이지) - 파일 다운로드 R0964LC12C 데이타시트 다운로드

No Preview Available !

Date:- 01 August 2012
Data Sheet Issue:- 2
Distributed Gate Thyristor
Types R0964LC10x to R0964LC12x
Absolute Maximum Ratings
VDRM
VDSM
VRRM
VRSM
VOLTAGE RATINGS
Repetitive peak off-state voltage, (note 1)
Non-repetitive peak off-state voltage, (note 1)
Repetitive peak reverse voltage, (note 1)
Non-repetitive peak reverse voltage, (note 1)
MAXIMUM
LIMITS
1000-1200
1000-1200
1000-1200
1000-1300
UNITS
V
V
V
V
IT(AV)
IT(AV)
IT(AV)
IT(RMS)
IT(d.c.)
ITSM
ITSM2
I2t
I2t
(di/dt)cr
VRGM
PG(AV)
PGM
VGD
THS
Tstg
OTHER RATINGS
Mean on-state current, Tsink=55°C, (note 2)
Mean on-state current. Tsink=85°C, (note 2)
Mean on-state current. Tsink=85°C, (note 3)
Nominal RMS on-state current, Tsink=25°C, (note 2)
D.C. on-state current, Tsink=25°C, (note 4)
Peak non-repetitive surge tp=10ms, VRM=0.6VRRM, (note 5)
Peak non-repetitive surge tp=10ms, VRM10V, (note 5)
I2t capacity for fusing tp=10ms, VRM=0.6VRRM, (note 5)
I2t capacity for fusing tp=10ms, VRM10V, (note 5)
Maximum rate of rise of on-state current (repetitive), (Note 6)
Maximum rate of rise of on-state current (non-repetitive), (Note 6)
Peak reverse gate voltage
Mean forward gate power
Peak forward gate power
Non-trigger gate voltage, (Note 7)
Operating temperature range
Storage temperature range
Notes:-
1) De-rating factor of 0.13% per °C is applicable for Tj below 25°C.
2) Double side cooled, single phase; 50Hz, 180° half-sinewave.
3) Single side cooled, single phase; 50Hz, 180° half-sinewave.
4) Double side cooled.
5) Half-sinewave, 125°C Tj initial.
6) VD=67% VDRM, IFG=2A, tr0.5µs, Tcase=125°C.
7) Rated VDRM.
MAXIMUM
LIMITS
964
622
348
1971
869
9.4
10.8
442×103
580×103
1000
1500
5
2
30
0.25
-40 to +125
-40 to +150
UNITS
A
A
A
A
A
kA
kA
A2s
A2s
A/µs
A/µs
V
W
W
V
°C
°C
Data Sheet. Types R0964LC10x to R0964LC12x Issue 2
Page 1 of 12
August, 2012

No Preview Available !

Characteristics
R0964LC10x to R0964LC12x
PARAMETER
VTM Maximum peak on-state voltage
VT0 Threshold voltage
rT Slope resistance
(dv/dt)cr Critical rate of rise of off-state voltage
IDRM Peak off-state current
IRRM Peak reverse current
VGT Gate trigger voltage
IGT Gate trigger current
IH Holding current
tgt Gate-controlled turn-on delay time
tgd Turn-on time
Qrr Recovered charge
Qra Recovered charge, 50% Chord
Irr Reverse recovery current
trr Reverse recovery time
tq Turn-off time (note 2)
RthJK Thermal resistance, junction to heatsink
F Mounting force
Wt Weight
MIN.
-
-
-
200
-
-
-
-
-
-
-
-
-
-
-
-
15
-
-
10
-
TYP. MAX. TEST CONDITIONS (Note 1)
-
-
-
-
-
-
-
-
-
0.9
0.4
170
75
85
2.15
-
-
-
-
-
340
1.96 ITM=1400A
1.53
0.309
- VD=80% VDRM, linear ramp
70 Rated VDRM
70 Rated VRRM
3.0
Tj=25°C
300
VD=10V, IT=3A
1000
2.0
1.0
Tj=25°C
VD=67% VDRM, IT=2000A, di/dt=60A/µs,
IFG=2A, tr=0.5µs, Tj=25°C
-
90 ITM=1000A, tp=1000µs, di/dt=60A/µs,
- Vr=50V
-
25
25
0.032
ITM=1000A, tp=1000µs, di/dt=60A/µs,
Vr=50V, Vdr=80%VDRM, dVdr/dt=20V/µs
ITM=1000A, tp=1000µs, di/dt=60A/µs,
Vr=50V, Vdr=80%VDRM, dVdr/dt=200V/µs
Double side cooled
0.064 Single side cooled
20
-
UNITS
V
V
m
V/µs
mA
mA
V
mA
mA
µs
µs
µC
µC
A
µs
µs
K/W
K/W
kN
g
Notes:-
1) Unless otherwise indicated Tj=125°C.
2) The required tq (specified with dVdr/dt=200V/µs) is represented by an ‘x’ in the device part number. See ordering information for
details of tq codes.
Data Sheet. Types R0964LC10x to R0964LC12x Issue 2
Page 2 of 12
August, 2012

No Preview Available !

R0964LC10x to R0964LC12x
Notes on Ratings and Characteristics
1.0 Voltage Grade Table
Voltage Grade
10
12
VDRM VDSM VRRM
V
1000
1200
VRSM
V
1100
1300
VD VR
DC V
750
810
2.0 Extension of Voltage Grades
This report is applicable to other and higher voltage grades when supply has been agreed by
Sales/Production.
3.0 Extension of Turn-off Time
This Report is applicable to other tq/re-applied dv/dt combinations when supply has been agreed by
Sales/Production.
4.0 Repetitive dv/dt
Higher dv/dt selections are available up to 1000V/µs on request.
5.0 De-rating Factor
A blocking voltage de-rating factor of 0.13%/°C is applicable to this device for Tj below 25°C.
6.0 Rate of rise of on-state current
The maximum un-primed rate of rise of on-state current must not exceed 1500A/µs at any time during
turn-on on a non-repetitive basis. For repetitive performance, the on-state rate of rise of current must not
exceed 1000A/µs at any time during turn-on. Note that these values of rate of rise of current apply to the
total device current including that from any local snubber network.
7.0 Square wave ratings
These ratings are given for load component rate of rise of forward current of 100 and 500A/µs.
8.0 Duty cycle lines
The 100% duty cycle is represented on all the ratings by a straight line. Other duties can be included as
parallel to the first.
9.0 Maximum Operating Frequency
The maximum operating frequency is set by the on-state duty, the time required for the thyristor to turn off
(tq) and for the off-state voltage to reach full value (tv), i.e.
f max =
1
tpulse + tq + tv
Data Sheet. Types R0964LC10x to R0964LC12x Issue 2
Page 3 of 12
August, 2012