R0633YS10D.pdf 데이터시트 (총 12 페이지) - 파일 다운로드 R0633YS10D 데이타시트 다운로드

No Preview Available !

WESTCODE
Date:- 25 Jun, 2001
Data Sheet Issue:- 2
Distributed Gate Thyristor
Types R0633YS10x to R0633YS12x
Absolute Maximum Ratings
VDRM
VDSM
VRRM
VRSM
VOLTAGE RATINGS
Repetitive peak off-state voltage, (note 1)
Non-repetitive peak off-state voltage, (note 1)
Repetitive peak reverse voltage, (note 1)
Non-repetitive peak reverse voltage, (note 1)
MAXIMUM
LIMITS
1000-1200
1000-1200
1000-1200
1100-1300
UNITS
V
V
V
V
IT(AV)
IT(AV)
IT(AV)
IT(RMS)
IT(d.c.)
ITSM
ITSM2
I2t
I2t
diT/dt
VRGM
PG(AV)
PGM
VGD
THS
Tstg
OTHER RATINGS
Mean on-state current, Tsink=55°C, (note 2)
Mean on-state current. Tsink=85°C, (note 2)
Mean on-state current. Tsink=85°C, (note 3)
Nominal RMS on-state current, Tsink=25°C, (note 2)
D.C. on-state current, Tsink=25°C, (note 4)
Peak non-repetitive surge tp=10ms, VRM=0.6VRRM, (note 5)
Peak non-repetitive surge tp=10ms, VRM10V, (note 5)
I2t capacity for fusing tp=10ms, VRM=0.6VRRM, (note 5)
I2t capacity for fusing tp=10ms, VRM10V, (note 5)
Maximum rate of rise of on-state current (repetitive), (Note 6)
Maximum rate of rise of on-state current (non-repetitive), (Note 6)
Peak reverse gate voltage
Mean forward gate power
Peak forward gate power
Non-trigger gate voltage, (Note 7)
Operating temperature range
Storage temperature range
Notes:-
1) De-rating factor of 0.13% per °C is applicable for Tj below 25°C.
2) Double side cooled, single phase; 50Hz, 180° half-sinewave.
3) Single side cooled, single phase; 50Hz, 180° half-sinewave.
4) Double side cooled.
5) Half-sinewave, 125°C Tj initial.
6) VD=67% VDRM, IFG=2A, tr0.5µs, Tcase=125°C.
7) Rated VDRM.
MAXIMUM
LIMITS
633
423
246
1269
1055
6.3
6.9
200×103
240×103
500
1000
5
2
30
0.25
-40 to +125
-40 to +150
UNITS
A
A
A
A
A
kA
kA
A2s
A2s
A/µs
A/µs
V
W
W
V
°C
°C
Data Sheet. Types R0633YS10x to R0633YS12x Issue 2
Page 1 of 12
June, 2001

No Preview Available !

WESTCODE Positive development in power electronics
Characteristics
R0663YS10x to R0633YS12x
PARAMETER
VTM
V0
rS
dv/dt
IDRM
IRRM
VGT
IGT
IH
Qrr
Qra
Irm
trr
Maximum peak on-state voltage
Threshold voltage
Slope resistance
Critical rate of rise of off-state voltage
Peak off-state current
Peak reverse current
Gate trigger voltage
Gate trigger current
Holding current
Recovered charge
Recovered charge, 50% Chord
Reverse recovery current
Reverse recovery time
tq Turn-off time
Rth(j-hs) Thermal resistance, junction to heatsink
F Mounting force
Wt Weight
MIN.
-
-
-
200
-
-
-
-
-
-
-
-
-
-
20
-
-
5.5
-
TYP. MAX. TEST CONDITIONS (Note 1)
UNITS
-
-
-
-
-
-
-
-
-
125
85
65
2.25
-
-
-
-
-
90
1.85 ITM=1000A
1.25
0.614
- VD=80% VDRM, linear ramp
60 Rated VDRM
60 Rated VRRM
3.0 Tj=25°C
200 Tj=25°C
VD=10V, IT=3A
1000 Tj=25°C
-
100
- ITM=550A, tp=500µs, di/dt=40A/µs, Vr=50V
-
28
30
0.050
ITM=550A, tp=500µs, di/dt=40A/µs, Vr=50V,
Vdr=80%VDRM, dVdr/dt=20V/µs
ITM=550A, tp=500µs, di/dt=40A/µs, Vr=50V,
Vdr=80%VDRM, dVdr/dt=200V/µs
Double side cooled
0.10 Single side cooled
10
-
V
V
m
V/µs
mA
mA
V
mA
mA
µC
µC
A
µs
µs
K/W
K/W
kN
g
Notes:-
1) Unless otherwise indicated Tj=125°C.
2) The required tq (specified with dVdr/dt=200V/µs) is represented by an ‘x’ in the device part number. See ordering information
for details of tq codes.
Introduction
The R0633 series of Distributed Gate thyristors have fast switching characteristics provided by a
regenerative, interdigitated gate. They also exhibit low switching losses. They are therefore suitable for
medium current, medium frequency applications.
Data Sheet. Types R0633YS10x to R0633YS12x Issue 2
Page 2 of 12
June, 2001

No Preview Available !

WESTCODE Positive development in power electronics
Notes on Ratings and Characteristics
R0663YS10x to R0633YS12x
1.0 Voltage Grade Table
Voltage Grade
10
12
VDRM VDSM VRRM
V
1000
1200
VRSM
V
1100
1300
VD VR
DC V
700
810
2.0 Extension of Voltage Grades
This report is applicable to other and higher voltage grades when supply has been agreed by
Sales/Production.
3.0 Extension of Turn-off Time
This Report is applicable to other tq/re-applied dv/dt combinations when supply has been agreed by
Sales/Production.
4.0 Repetitive dv/dt
Higher dv/dt selections are available up to 1000V/µs on request.
5.0 De-rating Factor
A blocking voltage de-rating factor of 0.13%/°C is applicable to this device for Tj below 25oC.
6.0 Rate of rise of on-state current
The maximum un-primed rate of rise of on-state current must not exceed 1500A/µs at any time during
turn-on on a non-repetitive basis. For repetitive performance, the on-state rate of rise of current must not
exceed 1000A/µs at any time during turn-on. Note that these values of rate of rise of current apply to the
total device current including that from any local snubber network.
7.0 Square wave ratings
These ratings are given for load component rate of rise of forward current of 100 and 500 A/µs.
8.0 Duty cycle lines
The 100% duty cycle is represented on all the ratings by a straight line. Other duties can be included as
parallel to the first.
9.0 Maximum Operating Frequency
The maximum operating frequency is set by the on-state duty, the time required for the thyristor to turn off
(tq) and for the off-state voltage to reach full value (tv), i.e.
f max =
1
tpulse + tq + tv
Data Sheet. Types R0633YS10x to R0633YS12x Issue 2
Page 3 of 12
June, 2001