R0736LC25L.pdf 데이터시트 (총 12 페이지) - 파일 다운로드 R0736LC25L 데이타시트 다운로드

No Preview Available !

Date:- 01 August 2012
Data Sheet Issue:- 2
Distributed Gate Thyristor
Types R0736LC20x to R0736LC25x
Absolute Maximum Ratings
VDRM
VDSM
VRRM
VRSM
VOLTAGE RATINGS
Repetitive peak off-state voltage, (note 1)
Non-repetitive peak off-state voltage, (note 1)
Repetitive peak reverse voltage, (note 1)
Non-repetitive peak reverse voltage, (note 1)
MAXIMUM
LIMITS
2000-2500
2000-2500
2000-2500
2100-2600
UNITS
V
V
V
V
IT(AV)
IT(AV)
IT(AV)
IT(RMS)
IT(d.c.)
ITSM
ITSM2
I2t
I2t
(di/dt)cr
VRGM
PG(AV)
PGM
VGD
THS
Tstg
OTHER RATINGS
Mean on-state current, Tsink=55°C, (note 2)
Mean on-state current. Tsink=85°C, (note 2)
Mean on-state current. Tsink=85°C, (note 3)
Nominal RMS on-state current, Tsink=25°C, (note 2)
D.C. on-state current, Tsink=25°C, (note 4)
Peak non-repetitive surge tp=10ms, VRM=0.6VRRM, (note 5)
Peak non-repetitive surge tp=10ms, VRM10V, (note 5)
I2t capacity for fusing tp=10ms, VRM=0.6VRRM, (note 5)
I2t capacity for fusing tp=10ms, VRM10V, (note 5)
Maximum rate of rise of on-state current (repetitive), (Note 6)
Maximum rate of rise of on-state current (non-repetitive), (Note 6)
Peak reverse gate voltage
Mean forward gate power
Peak forward gate power
Non-trigger gate voltage, (Note 7)
Operating temperature range
Storage temperature range
Notes:-
1) De-rating factor of 0.13% per °C is applicable for Tj below 25°C.
2) Double side cooled, single phase; 50Hz, 180° half-sinewave.
3) Single side cooled, single phase; 50Hz, 180° half-sinewave.
4) Double side cooled.
5) Half-sinewave, 125°C Tj initial.
6) VD=67% VDRM, IFG=2A, tr0.5µs, Tcase=125°C.
7) Rated VDRM.
MAXIMUM
LIMITS
736
483
276
1490
1207
6800
7500
231×103
281×103
1000
1500
5
2
30
0.25
-40 to +125
-40 to +150
UNITS
A
A
A
A
A
A
A
A2s
A2s
A/µs
A/µs
V
W
W
V
°C
°C
Data Sheet. Types R0736LC20x-25x Issue 2
Page 1 of 12
August, 2012

No Preview Available !

Characteristics
R0736LC20x to R0736LC25x
PARAMETER
VTM
VT0
rT
(dv/dt)cr
IDRM
IRRM
VGT
IGT
IH
tgd
Maximum peak on-state voltage
Threshold voltage
Slope resistance
Critical rate of rise of off-state voltage
Peak off-state current
Peak reverse current
Gate trigger voltage
Gate trigger current
Holding current
Gate controlled turn-on delay time
tgt delay time
Qrr Recovered charge
Qra Recovered charge, 50% Chord
Irm Reverse recovery current
trr Reverse recovery time
tq Turn-off time (note 2)
RthJK
Thermal resistance, junction to heatsink
F Mounting force
Wt Weight
MIN.
-
-
-
200
-
-
-
-
-
-
-
-
-
-
-
-
50
-
-
10
-
TYP. MAX. TEST CONDITIONS (Note 1)
- 2.7 ITM=1400A
- 1.842
- 0.619
- - VD=80% VDRM, linear ramp
- 100 Rated VDRM
- 100 Rated VRRM
- 3.0
Tj=25°C
- 300
VD=10V, IT=2A
- 1000 Tj=25°C
0.5 1.2 VD=67% VDRM, ITM=1000A, di/dt=60A/µs,
1.2 2.4 IFG=2A, tr=0.5µs, Tcase=25°C
640 -
240 350 ITM=1000A, tp=1000µs, di/dt=60A/µs,
125 - Vr=50V
3.8 -
-
50
ITM=1000A, tp=1000µs, di/dt=60A/µs,
Vr=50V, Vdr=67%VDRM, dVdr/dt=20V/µs
-
70
ITM=1000A, tp=1000µs, di/dt=60A/µs,
Vr=50V, Vdr=67%VDRM, dVdr/dt=200V/µs
- 0.032 Double side cooled
- 0.064 Single side cooled
- 20
340 -
UNITS
V
V
m
V/µs
mA
mA
V
mA
mA
µs
µC
µC
A
µs
µs
K/W
K/W
kN
g
Notes:-
1) Unless otherwise indicated Tj=125°C.
2) The required tq (specified with dVdr/dt=200V/µs) is represented by an ‘x’ in the device part number. See ordering information for
details of tq codes.
Data Sheet. Types R0736LC20x-25x Issue 2
Page 2 of 12
August, 2012

No Preview Available !

R0736LC20x to R0736LC25x
Notes on Ratings and Characteristics
1.0 Voltage Grade Table
Voltage Grade
20
22
24
25
VDRM VDSM VRRM
V
2000
2200
2400
2500
VRSM
V
2100
2300
2500
2600
VD VR
DC V
1250
1350
1450
1500
2.0 Extension of Voltage Grades
This report is applicable to other voltage grades when supply has been agreed by Sales/Production.
3.0 Extension of Turn-off Time
This Report is applicable to other tq/re-applied dv/dt combinations when supply has been agreed by
Sales/Production.
4.0 Repetitive dv/dt
Higher dv/dt selections are available up to 1000V/µs on request.
5.0 De-rating Factor
A blocking voltage de-rating factor of 0.13%/°C is applicable to this device for Tj below 25°C.
6.0 Rate of rise of on-state current
The maximum un-primed rate of rise of on-state current must not exceed 1500A/µs at any time during
turn-on on a non-repetitive basis. For repetitive performance, the on-state rate of rise of current must not
exceed 1000A/µs at any time during turn-on. Note that these values of rate of rise of current apply to the
total device current including that from any local snubber network.
7.0 Square wave ratings
These ratings are given for load component rate of rise of forward current of 100 and 500 A/µs.
8.0 Duty cycle lines
The 100% duty cycle is represented on all the ratings by a straight line. Other duties can be included as
parallel to the first.
9.0 Maximum Operating Frequency
The maximum operating frequency is set by the on-state duty, the time required for the thyristor to turn off
(tq) and for the off-state voltage to reach full value (tv), i.e.
f max =
1
tpulse + tq + tv
Data Sheet. Types R0736LC20x-25x Issue 2
Page 3 of 12
August, 2012