W0735SA120.pdf 데이터시트 (총 8 페이지) - 파일 다운로드 W0735SA120 데이타시트 다운로드

No Preview Available !

Date:- 20th August, 2014
Data Sheet Issue:- 2
Rectifier Diode
Types W0735R/SA120 to W0735R/SA150
Previous Type No.: SW02-15PHN/R470
Absolute Maximum Ratings
VRRM
VRSM
VOLTAGE RATINGS
Repetitive peak reverse voltage, (note 1)
Non-repetitive peak reverse voltage, (note 1)
MAXIMUM
LIMITS
1200-1500
1300-1600
UNITS
V
V
OTHER RATINGS
IF(AV)M
IF(AV)M
IF(RMS)M
IF(d.c.)
IFSM
IFSM2
I2t
I2t
Tj op
Tstg
Maximum average forward current, Tcase=55°C, (note 2)
Maximum average forward current. Tcase=100°C, (note 2)
Nominal RMS forward current, Tcase=25°C, (note 2)
D.C. forward current, Tcase=25°C, (note 3)
Peak non-repetitive surge tp=10ms, Vrm=60%VRRM, (note 3)
Peak non-repetitive surge tp=10ms, Vrm10V, (note 3)
I2t capacity for fusing tp=10ms, Vrm=60%VRRM, (note 3)
I2t capacity for fusing tp=10ms, Vrm10V, (note 3)
Operating temperature range
Storage temperature range
Notes:-
1) De-rating factor of 0.13% per °C is applicable for Tj below 25°C.
2) single phase; 50Hz, 180° half-sinewave.
3) Half-sinewave, 190°C Tj initial.
MAXIMUM
LIMITS
735
551
1325
1091
9000
10000
405×103
500×103
-40 to +190
-55 to +190
UNITS
A
A
A
A
A
A
A2s
A2s
°C
°C
Data Sheet. Types W0735R/SA120 to W0735R/SA150 Issue 2
Page 1 of 8
August, 2014

No Preview Available !

Characteristics
Rectifier Diode Types W0735R/SA120 to W0735R/SA150
VFM
VT0
rT
IRRM
RthJK
F
Wt
PARAMETER
Maximum peak forward voltage
Threshold voltage
Slope resistance
Peak reverse current
Thermal resistance, junction to heatsink
Mounting Torque
Weight
MIN.
-
-
-
-
-
2.5
TYP. MAX. TEST CONDITIONS (Note 1)
- 1.3 IFM=1500A
- 0.79
- 0.342
- 15 Rated VRRM
- 0.13 DC & 180° Sine Wave
- 2.77
250
Notes:-
1) Unless otherwise indicated Tj=190°C.
UNITS
V
V
m
mA
K/W
kgM
g
Data Sheet. Types W0735R/SA120 to W0735R/SA150 Issue 2
Page 2 of 8
August, 2014

No Preview Available !

Rectifier Diode Types W0735R/SA120 to W0735R/SA150
Notes on Ratings and Characteristics
1.0 Voltage Grade Table
Voltage Grade
12
15
VRRM
V
1200
1500
VRSM
V
1300
1600
VR
DC V
800
1000
2.0 Extension of Voltage Grades
This report is applicable to other voltage grades when supply has been agreed by Sales/Production.
3.0 De-rating Factor
A blocking voltage de-rating factor of 0.13%/°C is applicable to this device for Tj below 25°C.
4.0 Snubber Components
When selecting snubber components, care must be taken not to use excessively large values of snubber
capacitor or excessively small values of snubber resistor. Such excessive component values may lead to
device damage due to the large resultant values of snubber discharge current. If required, please consult
the factory for assistance.
5.0 Computer Modelling Parameters
5.1 Device Dissipation Calculations
I AV  VT 0
VT 02 4 ff 2 rT WAV
2 ff 2 rT
and:
Where VT0=0.79V, rT=0.342m
Rth = Supplementary thermal impedance, see table below and
ff = Form factor, see table below.
WAV
T
Rth
T Tj max TK
Conduction Angle
Square wave
Sine wave
Supplementary Thermal Impedance
6 phase (60°) 3 phase (120°)
0.174
0.153
0.172
0.153
½ wave (180°)
0.143
0.149
d.c.
0.130
Conduction Angle
Square wave
Sine wave
Form Factors
6 phase (60°) 3 phase (120°)
2.449
1.732
2.778
1.879
½ wave (180°)
1.414
1.57
d.c.
1
Data Sheet. Types W0735R/SA120 to W0735R/SA150 Issue 2
Page 3 of 8
August, 2014