M0130RL200.pdf 데이터시트 (총 11 페이지) - 파일 다운로드 M0130RL200 데이타시트 다운로드

No Preview Available !

Date:- 6 Nov, 2014
Data Sheet Issue:- 2
Soft Recovery Diode
Type M0130#L200 to M0130#L250
Absolute Maximum Ratings
VRRM
VRSM
VOLTAGE RATINGS
Repetitive peak reverse voltage, (note 1)
Non-repetitive peak reverse voltage, (note 1)
IF(AV)M
IF(AV)M
IF(RMS)
IF(d.c.)
IFSM
IFSM2
I2t
I2t
Tj op
Tstg
OTHER RATINGS
Maximum average forward current, Tsink=55°C, (note 2)
Maximum average forward current. Tsink=100°C, (note 2)
Nominal RMS forward current, Tsink=25°C, (note 2)
D.C. forward current, Tsink=25°C, (note 3)
Peak non-repetitive surge tp=10ms, VRM=60%VRRM, (note 3)
Peak non-repetitive surge tp=10ms, VRM10V, (note 3)
I2t capacity for fusing tp=10ms, VRM=60%VRRM, (note 3)
I2t capacity for fusing tp=10ms, VRM10V, (note 3)
Operating temperature range
Storage temperature range
Notes:-
1) De-rating factor of 0.13% per °C is applicable for Tj below 25°C.
2) single phase; 50Hz, 180° half-sinewave.
3) Half-sinewave, 125°C Tj initial.
MAXIMUM
LIMITS
2000-2500
2100-2600
UNITS
V
V
MAXIMUM
LIMITS
130
55
269
207
2240
2450
25×103
30×103
-40 to +125
-40 to +150
UNITS
A
A
A
A
A
A
A2s
A2s
°C
°C
Data Sheet. Types M0130#L200 to M0130#L250 Issue 2
Page 1 of 11
October 2014

No Preview Available !

Characteristics
Soft Recovery Diode Types M0130#L200 to M0130#L250
PARAMETER
MIN. TYP. MAX. TEST CONDITIONS (Note 1)
VFM Maximum peak forward voltage
VT0 Threshold voltage
rT Slope resistance
VFRM Maximum forward recovery voltage
IRRM Peak reverse current
Qra Recovered charge, 50% Chord
- - 1.64 IFM=280A
- - 1.29
- - 1.54
- - 150 di/dt = 1000A/µs
- - 20 Rated VRRM
265
IFM=1000A, tp=500µs, di/dt=200A/µs,
Vr=50V, 50% Chord.
RthJC Thermal resistance, junction to case
T Mounting torque
Wt Weight
- - 0.30
11 - 14
- 85 -
Notes:-
1) Unless otherwise indicated Tj=125°C.
UNITS
V
V
m
V
mA
µC
K/W
Nm
g
Data Sheet. Types M0130#L200 to M0130#L250 Issue 2
Page 2 of 11
October 2014

No Preview Available !

Notes on Ratings and Characteristics
1.0 Voltage Grade Table
Voltage Grade
20
25
VRRM
(V)
2000
2500
Soft Recovery Diode Types M0130#L200 to M0130#L250
VRSM
(V)
2100
2600
VR dc
(V)
1250
1500
2.0 De-rating Factor
A blocking voltage de-rating factor of 0.13% per °C is applicable to this device for Tj below 25°C.
3.0 ABCD Constants
These constants (applicable only over current range of VF characteristic in Figure 1) are the coefficients of
the expression for the forward characteristic given below:
VF A B ln(IF ) C IF D IF
where IF = instantaneous forward current.
4.0 Reverse recovery ratings
(i) Qra is based on 50% Irm chord as shown in Fig.(a) below.
(ii) Qrr is based on a 150s integration time.
150s
I.e. Qrr irr.dt
0
(iii)
K Factor t1
t2
Data Sheet. Types M0130#L200 to M0130#L250 Issue 2
Page 3 of 11
October 2014