N0616LC400.pdf 데이터시트 (총 10 페이지) - 파일 다운로드 N0616LC400 데이타시트 다운로드

No Preview Available !

WESTCODE
An IXYS Company
Date:- 1 Aug, 2002
Data Sheet Issue:- 1
Phase Control Thyristor
Types N0616LC400 to N0616LC450
Old Type No.: N255CH36-45
Absolute Maximum Ratings
VDRM
VDSM
VRRM
VRSM
VOLTAGE RATINGS
Repetitive peak off-state voltage, (note 1)
Non-repetitive peak off-state voltage, (note 1)
Repetitive peak reverse voltage, (note 1)
Non-repetitive peak reverse voltage, (note 1)
MAXIMUM
LIMITS
4000-4500
4000-4500
4000-4500
4100-4600
UNITS
V
V
V
V
IT(AV)
IT(AV)
IT(AV)
IT(RMS)
IT(d.c.)
ITSM
ITSM2
I2t
I2t
diT/dt
VRGM
PG(AV)
PGM
VGD
THS
Tstg
OTHER RATINGS
Mean on-state current. Tsink=55°C, (note 2)
Mean on-state current. Tsink=85°C, (note 2)
Mean on-state current. Tsink=85°C, (note 3)
Nominal RMS on-state current. Tsink=25°C, (note 2)
D.C. on-state current. Tsink=25°C, (note 4)
Peak non-repetitive surge tp=10ms, Vrm=0.6VRRM, (note 5)
Peak non-repetitive surge tp=10ms, Vrm10V, (note 5)
I2t capacity for fusing tp=10ms, Vrm=0.6VRRM, (note 5)
I2t capacity for fusing tp=10ms, Vrm10V, (note 5)
Maximum rate of rise of on-state current (repetitive), (Note 6)
Maximum rate of rise of on-state current (non-repetitive), (Note 6)
Peak reverse gate voltage
Mean forward gate power
Peak forward gate power
Non-trigger gate voltage, (Note 7)
Operating temperature range
Storage temperature range
Notes: -
1) De-rating factor of 0.13% per °C is applicable for Tj below 25°C.
2) Double side cooled, single phase; 50Hz, 180° half-sinewave.
3) Single side cooled, single phase; 50Hz, 180° half-sinewave.
4) Double side cooled.
5) Half-sinewave, 125°C Tj initial.
6) VD=67% VDRM, ITM=1000A, IFG=2A, tr0.5µs, Tcase=125°C.
7) Rated VDRM.
MAXIMUM
LIMITS
616
436
276
1197
862
5250
5780
138×103
167×103
150
300
5
4
30
0.25
-40 to +125
-40 to +150
UNITS
A
A
A
A
A
A
A
A2s
A2s
A/µs
A/µs
V
W
W
V
°C
°C
Data Sheet. Types N0616LC400 to N0616LC450 Issue 1.
Page 1 of 10
August, 2002

No Preview Available !

WESTCODE An IXYS Company
Characteristics
Phase Control Thyristor types N0616LC400 to N0616LC450
PARAMETER
VTM
V0
rS
dv/dt
IDRM
IRRM
VGT
IGT
IH
tgd
tgt
Qrr
Qra
Irm
trr
Maximum peak on-state voltage
Threshold voltage
Slope resistance
Critical rate of rise of off-state voltage
Peak off-state current
Peak reverse current
Gate trigger voltage
Gate trigger current
Holding current
Gate controlled turn-on delay time
Turn-on time
Recovered Charge
Recovered Charge, 50% chord
Reverse recovery current
Reverse recovery time, 50% chord
tq Turn-off time
Rth(j-hs) Thermal resistance, junction to heatsink
F Mounting force
Wt Weight
MIN.
-
-
-
1000
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10
-
TYP. MAX. TEST CONDITIONS (Note 1)
-
-
-
-
-
-
-
-
-
0.5
3.0
2500
1000
90
23
700
1000
-
-
-
340
2.9 ITM=1100A
1.22
1.53
- VD=80% VDRM, linear ramp, Gate O/C
60 Rated VDRM
60 Rated VRRM
3.0
Tj=25°C, VD=10V, IT=3A
300
1000 Tj=25°C
1.5 VD=67%VDRM, ITM=1000A, di/dt=10A/µs,
4.0 IFG=2A, tr=0.5µs, Tj=25°C
-
1500 ITM=1000A, tp=1000µs, di/dt=10A/µs,
- Vr=50V
-
900
1200
0.032
ITM=1000A, tp=1000µs, di/dt=10A/µs,
Vr=50V, Vdr=80%VDRM, dVdr/dt=20V/µs
ITM=1000A, tp=1000µs, di/dt=10A/µs,
Vr=50V, Vdr=80%VDRM, dVdr/dt=200V/µs
Double side cooled
0.064 Single side cooled
20
-
UNITS
V
V
m
V/µs
mA
mA
V
mA
mA
µs
µC
µC
A
µs
µs
K/W
K/W
kN
g
Notes: -
1) Unless otherwise indicated Tj=125°C.
Data Sheet. Types N0616LC400 to N0616LC450 Issue 1.
Page 2 of 10
August, 2002

No Preview Available !

WESTCODE An IXYS Company
Phase Control Thyristor types N0616LC400 to N0616LC450
Notes on Ratings and Characteristics
1.0 Voltage Grade Table
Voltage Grade
40
42
44
45
VDRM VDSM VRRM
V
4000
4200
4400
4500
VRSM
V
4100
4300
4500
4600
VD VR
DC V
2000
2040
2080
2100
2.0 Extension of Voltage Grades
This report is applicable to other and higher voltage grades when supply has been agreed by
Sales/Production.
3.0 De-rating Factor
A blocking voltage de-rating factor of 0.13%/°C is applicable to this device for Tj below 25°C.
4.0 Repetitive dv/dt
Standard dv/dt is 1000V/µs.
5.0 Rate of rise of on-state current
The maximum un-primed rate of rise of on-state current must not exceed 300A/µs at any time during turn-
on on a non-repetitive basis. For repetitive performance, the on-state rate of rise of current must not
exceed 150A/µs at any time during turn-on. Note that these values of rate of rise of current apply to the
total device current including that from any local snubber network.
6.0 Gate Drive
The recommended pulse gate drive is 30V, 15with a short-circuit current rise time of not more than
0.5µs. This gate drive must be applied when using the full di/dt capability of the device.
The pulse duration may need to be configured according to the application but should be no shorter than
20µs, otherwise an increase in pulse current may be needed to supply the necessary charge to trigger.
7.0 Computer Modelling Parameters
7.1 Device Dissipation Calculations
I AV = −V0 +
V02 + 4 ff rs WAV
2 ff rs
Where V0=1.22V, rs=1.53mΩ,
and:
WAV
=
T
Rth
T = Tj max THs
Rth = Supplementary thermal impedance, see table below.
ff = Form factor, see table below.
Conduction Angle
Square wave Double Side Cooled
Square wave Single Side Cooled
Sine wave Double Side Cooled
Sine wave Single Side Cooled
Supplementary Thermal Impedance
30°
0.0124
0.0249
0.0168
0.0249
60°
0.0122
0.0248
0.0140
0.0247
90°
0.0121
0.0247
0.0131
0.0246
120°
0.0119
0.0246
0.0118
0.0244
180°
0.0117
0.0244
0.0112
0.0241
270°
0.0113
0.0241
d.c.
0.011
0.022
Conduction Angle
Square wave
Sine wave
30°
3.46
3.98
Form Factors
60° 90°
2.45 2
2.78 2.22
120°
1.73
1.88
180°
1.41
1.57
270°
1.15
d.c.
1
Data Sheet. Types N0616LC400 to N0616LC450 Issue 1.
Page 3 of 10
August, 2002