M02066.pdf 데이터시트 (총 20 페이지) - 파일 다운로드 M02066 데이타시트 다운로드

No Preview Available !

Preliminary Information
This document contains information on a new product. The parametric information, although not
fully characterized, is the result of testing initial devices.
M02066
3.3 Volt Laser Driver IC for Applications to 3 Gbps Data Sheet
The M02066 is a highly integrated, programmable laser driver intended for SONET/SDH applications with FEC to 3
Gbps. Using differential PECL data and clock inputs, the M02066 supplies the bias and modulation current
required to drive an edge-emitting laser. The modulation output can be DC-coupled to the laser diode, giving a
significant power saving over AC-coupled operation.
The M02066 includes automatic power control to maintain a constant average laser output power over temperature
and life. In addition, the modulation current can be temperature compensated to minimize variation in extinction
ratio over temperature.
Output flags indicate laser end of life as well as failure of the APC circuitry to maintain average output power.
General Note: This product was previously called the CX02066.
Features
Applications
• High speed operation; suitable for applications to 3 Gbps.
• Short reach and Metro SONET/SDH
• Typical rise/fall times of 90 ps.
• Datacomms Modules
• DC or AC coupled modulation drive.
• Add/Drop Multiplexers
• Differential data and clock inputs to minimize pattern dependent • Digital Cross Connects
jitter.
• Independently Programmable Laser Bias and Modulation currents.
• Bias current to 100 mA and modulation current to 85 mA at VCC =
3.3 V
• Automatic Laser Power Control, with programmable temperature
compensation and ‘Slow-Start’.
• Bias and modulation current monitor
• Operates with +3.3 Volt supply
• Functionally compatible with MAX 3869
• The M02066-21 and M02066-51 are available in a BCC+24
package. The M02066-82 is available in a TQFP32 package.
• Available in RoHS compliant packages
Functional Block Diagram
CEN
VCC
OUT-
OUT+
RD
RSHUNT
CSHUNT
DATA
CLK
DIS
ENA
BIASMON
M ODM O N
D
Q
IB I A S
60
IM OD
60
X100
GNDA
OCA
X60
X1
IB IA S
PD
OCA SET
CMPC
VREF
Failure
D etec t
MPCSET
RMPCSET
FAIL
NOTE: BCC+24 Package
PD and MPCSET are common on Pin 13
BIASMON and MODMON are common on Pin 4
VCC
02066-DSH-001-D
Mindspeed Technologies®
Preliminary Information / Mindspeed Proprietary and Confidential
November 2006

No Preview Available !

Ordering Information
Part Number
Package
M02066-21
BCC+24 package with 20 ps or less DCD
M02066-51
BCC+24 package with 50 ps or less DCD
M02066-82
TQFP32 package with 80 ps or less DCD
M02066-EVME
BCC+24 electrical evaluation board
M02066-T-EVM
Optical evaluation board, TO-can laser
M02066G-21 *
BCC+24 RoHS compliant package, with 20 ps or less DCD
M02066G-51 *
BCC+24 RoHS compliant package, with 50 ps or less DCD
M02066G-82 *
TQFP32 RoHS compliant package, with 80 ps or less DCD
* The letter “G” designator after the part number indicates that the device is RoHS-compliant. Refer to www.mindspeed.com for additional
information.
Revision History
Revision Level
Date
D Preliminary November 2006
ASIC Revision
Description
x Added RoHS package information, updated format, no specification
changes.
BCC+24L Top View
TQFP32 Top View
CEN 1 24 23 22 21 20 19 OCASET
DIS 2
GND 3
4mm MON 4
FAIL 5
18 MODSET
17
1
6
TCSTART
TCSLOPE
15 GND
OCA 6
14 CMPC
VCC 7 8 9 10 11 12 13 PD
V CC
D IN
D IN
1
2
3
5mm VCC 4
CLK 5
CLK 6
VCC 7
CEN 8
4mm
5mm
02066-DSH-001-D
Mindspeed Technologies®
Preliminary Information / Mindspeed Proprietary and Confidential
24 PD
23 GND A
22 GND A
21 V CC
20 OUT-
19 OUT+
18 VCC
17 BIAS
ii

No Preview Available !

1.0 Product Specification
1.1 Absolute Maximum Ratings
These are the absolute maximum ratings at or beyond which the IC can be expected to fail or be damaged.
Functional operation at these levels is not implied.
Table 1-1. Absolute Maximum Ratings
Parameter
Power supply (VCC-GND)
Operating ambient
Storage temperature
Maximum laser bias current
Maximum laser modulation current (through OUT+/OUT2+, OUT-/OUT2-)
Rating
-0.5 to +6.0
-40 to +85
-65 to +150
120
100
Units
V
°C
°C
mA
mA
1.2 Recommended Operating Conditions
Table 1-2. Recommended Operating Conditions
Parameter
Power supply (VCC-GND)
Junction temperature (die)
Operating ambient
Rating
3.3 ± 10%
-40 to + 120
-40 to + 85
Units
V
°C
°C
02066-DSH-001-D
Mindspeed Technologies®
Preliminary Information / Mindspeed Proprietary and Confidential
1