25FLZ-SM1-TB.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 25FLZ-SM1-TB 데이타시트 다운로드

No Preview Available !

0.5mm
(.020") pitch
FLZ CONNECTOR
Connectors for FFC and FPC
Emboss Tape
Features ––––––––––––––––––––––––
This extremely small 0.5mm (.020") pitch
connector with a height of only 2.0mm
(.079") above the PCB surface allows
interconnection in extremely small spaces
and is an example of JST's leading edge
technology.
• Zero insertion force mechanism
A ZIF mechanism increases wear resistance and extends the
connector's mating life.
• Heat resistant design suitable for surface mounting
This housing is made of heat resistant plastic to allow reflow
soldering.
• In-line surface mount tails
Has an in-line surface mount tails for easy inspection.
• Two types of connections
The connector is available in either the normal or reverse
configurations. The FFC/FPC is positioned with its mating
surfaces facing upward for the normal configured connector,
while the reverse configuration requires that the FFC/FPC be
positioned with its mating surfaces facing down. The engineer
has greater freedom in designing his circuitry.
• Embossed tape for automatic mounting
The FLZ connector can be packaged in embossed tape for
automatic mounting.
492
HJST
Specifications –––––––––––––––––––
• Current rating: 0.5A AC, DC
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/40m max.
After environmental testing/60m max.
• Insulation resistance: 800M min.
• Withstanding voltage: 200V AC/minute
• Applicable FFC and FPC: Lead pitch/0.5mm(.020")
Lead width/0.35mm(.014")
Mating part thickness/
0.30±0.03mm(.012" ± .001")
<Note>FFC and FPC to be actually used should be checked for applicability.
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1Certified LR20812

No Preview Available !

FLZ CONNECTOR
Connector –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Normal type
Reverse type
B
A
0.5(.020)
3.2(.126)
HJST
4.6(.181)
[0.7
(.028)]
B
A
0.5(.020)
3.2(.126)
4.6(.181)
[0.7
(.028)]
Cir-
cuits
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
30
33
Normal type
06FLZ-SM1-TB
07FLZ-SM1-TB
08FLZ-SM1-TB
09FLZ-SM1-TB
10FLZ-SM1-TB
11FLZ-SM1-TB
12FLZ-SM1-TB
13FLZ-SM1-TB
14FLZ-SM1-TB
15FLZ-SM1-TB
16FLZ-SM1-TB
17FLZ-SM1-TB
18FLZ-SM1-TB
19FLZ-SM1-TB
20FLZ-SM1-TB
21FLZ-SM1-TB
22FLZ-SM1-TB
23FLZ-SM1-TB
24FLZ-SM1-TB
25FLZ-SM1-TB
26FLZ-SM1-TB
27FLZ-SM1-TB
28FLZ-SM1-TB
30FLZ-SM1-TB
33FLZ-SM1-TB
Model No.
Reverse type
06FLZ-RSM1-TB
07FLZ-RSM1-TB
08FLZ-RSM1-TB
09FLZ-RSM1-TB
10FLZ-RSM1-TB
11FLZ-RSM1-TB
12FLZ-RSM1-TB
13FLZ-RSM1-TB
14FLZ-RSM1-TB
15FLZ-RSM1-TB
16FLZ-RSM1-TB
17FLZ-RSM1-TB
18FLZ-RSM1-TB
19FLZ-RSM1-TB
20FLZ-RSM1-TB
21FLZ-RSM1-TB
22FLZ-RSM1-TB
23FLZ-RSM1-TB
24FLZ-RSM1-TB
25FLZ-RSM1-TB
26FLZ-RSM1-TB
27FLZ-RSM1-TB
28FLZ-RSM1-TB
30FLZ-RSM1-TB
Dimensions mm(in.)
AB
2.5(.098)
8.9(.350)
3.0(.118)
9.4(.370)
3.5(.138)
9.9(.390)
4.0(.157)
10.4(.409)
4.5(.177)
10.9(.429)
5.0(.197)
11.4(.449)
5.5(.217)
11.9(.469)
6.0(.236)
12.4(.488)
6.5(.256)
12.9(.508)
7.0(.276)
13.4(.528)
7.5(.295)
13.9(.547)
8.0(.315)
14.4(.567)
8.5(.335)
14.9(.587)
9.0(.354)
15.4(.606)
9.5(.374)
15.9(.626)
10.0(.394)
16.4(.646)
10.5(.413)
16.9(.665)
11.0(.433)
17.4(.685)
11.5(.453)
17.9(.705)
12.0(.472)
18.4(.724)
12.5(.492)
18.9(.744)
13.0(.512)
19.4(.764)
13.5(.531)
19.9(.783)
14.5(.571)
20.9(.823)
16.0(.630)
22.4(.882)
Material and Finish
Contact: Phosphor bronze, tin/lead-plated
Slider housing: Nylon 46, UL94V-0 (black)
Receptacle housing: Nylon 46, UL94V-0
( )FLZ-SM1-TB, gray
( )FLZ-RSM1-TB, natural
Solder tab: Phosphor bronze, tin/lead-plated
Note: The products listed above are supplied on embossed tape.
Q'ty /
reel
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
493

No Preview Available !

FLZ CONNECTOR
Connector <Inner-lock type> ––––––––––––––––––––––––––––––––––––––––––––––––
Normal type
Reverse type
B
A
0.5(.020)
3.6(.142)
HJST
5.1(.201)
0.7
(.028)
B
A
0.5(.020)
3.6(.142)
5.1(.201)
0.7
(.028)
Cir-
cuits
13
30
32
34
36
40
42
45
50
Normal type
30FLZ-SM1-R-TB
32FLZ-SM1-R-TB
34FLZ-SM1-R-TB
36FLZ-SM1-R-TB
40FLZ-SM1-R-TB
42FLZ-SM1-R-TB
45FLZ-SM1-R-TB
50FLZ-SM1-R-TB
Model No.
Reverse type
13FLZ-RSM1-R-TB
32FLZ-RSM1-R-TB
34FLZ-RSM1-R-TB
36FLZ-RSM1-R-TB
40FLZ-RSM1-R-TB
Dimensions mm(in.)
AB
6.0(.236)
13.1( .516)
14.5(.571)
21.6( .850)
15.5(.610)
22.6( .890)
16.5(.650)
23.6( .929)
17.5(.689)
24.6( .969)
19.5(.768)
26.6(1.047)
20.5(.807)
27.6(1.087)
22.0(.866)
29.1(1.146)
24.5(.965)
31.6(1.244)
Material and Finish
Contact: Phosphor bronze, tin/lead-plated
Slider housing: Nylon 46, UL94V-0 (black)
Receptacle housing: Nylon 46, UL94V-0
( )FLZ-SM1-R-TB, gray
( )FLZ-RSM1-R-TB, natural
Solder tab: Phosphor bronze, tin/lead-plated
Note: 1. The products listed above are supplied on embossed tape.
2. 45FLZ-SM1-R-TB and 50FLZ-SM1-R-TB are not CSA approved.
Q'ty /
reel
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
494

No Preview Available !

FLZ CONNECTOR
Taping specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––
Feeding direction
Feeding direction
Carrier tape
Cover tape leader
[13(.512)dia.]
W1 ( )+ 2.5 + .098
- 1.0 - .039
2.0 ± 0.5
(.079 ± .020)
Leader part
The end part Connector 100(3.937)min.
160(6.299)min. mounting part 400(15.748)min.
(6 to 24 circuits)
1.55± 0.05
(.061 ± .002)dia.
Feeding direction
4.0± 0.1
2.0± 0.1
(.157±.004) (.079±.004)
Cover tape
Carrier tape
(25 to 50 circuits)
1.55± 0.05(.061± .002)dia.
Feeding direction
4.0± 0.1
2.0± 0.1
(.157± .004) (.079±.004)
Cover tape
Carrier tape
12.0± 0.1
(.472 ±.004)
12.0± 0.1
(.472±.004)
Circuits
6 to 8
9 to 24
25 to 30
32 to 50
Taping dimensions mm(in.)
F
7.5(.295)
11.5(.453)
14.2(.559)
20.2(.795)
S
28.4(1.118)
40.4(1.591)
W
16.0( .630)
24.0( .945)
32.0(1.260)
44.0(1.732)
Reel dimen-
sions mm(in.)
W1
17.5( .689)
25.5(1.004)
33.5(1.319)
45.5(1.791)
Q'ty /
reel
2,000
2,000
2,000
2,000
Note:
1. Specifications conform to JIS C 0806. The tape width, connector recess
dimensions, etc. are determined by the number of circuits and external
shape of the connector to be loaded.
2. Specifications are subject to change without prior notice.
Lead section dimensions of FFC and FPC –––––––––––––––––––––––––––––––––––––
[0.5(.020)x(Number of circuits +1)] ± 0.05(.002)
0.5± 0.1
(.020± .004)
0.5± 0.03
(.020± .001)
[0.5(.020)x(Number of
circuits -1)] ± 0.03(.001)
0.35± 0.04
(.014± .002)
0.5± 0.1
(.020± .004) 0.3±0.03
(.012± .001)
Conductor
Cover layer
Reinforcing layer
Base layer
495

No Preview Available !

FLZ CONNECTOR
PC board layout (viewed from component side) and Assembly layout ––––––––––––––––––
(6 to 33 circuits)
0.5± 0.03
(.020± .001)
0.35± 0.05
(.014±.002)
3.3± 0.1
(.130± .004)
1.2±0.1
(.047±.004)
4.6(.181)
[0.7(.028)]
FPC
(13 to 50 circuits) <Inner-lock type>
3.75(.148) 0.5±0.03(.020±.001)
2.85
2.05(.081) (.112)
0.3±0.05(.012±.002)
1.55(.061)
Note:
1. Tolerances are non-cumulative: ±0.03mm(±.001" ) for all centers.
2. The dimensions above should serve as a guideline.
Contact JST for details.
FPC
5.1(.201)
0.7(.028)
496