PNX9535.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 PNX9535 데이타시트 다운로드

No Preview Available !

PNX9530; PNX9531; PNX9535
Software enabled video and multimedia entertainment
platform
Rev. 01.11C — 1 October 2009
Preliminary data sheet
1. General description
The PNX9530; PNX9531; PNX9535 is a software enabled video and multimedia
entertainment platform that provides video playback from a wide range of video sources
and different video formats. The PNX9530; PNX9531; PNX9535 has an outstanding array
of proprietary video post processing algorithms.
The PNX9530; PNX9531; PNX9535 is a true multimedia platform enabling Graphical User
Interface (GUI), connectivity and advanced audio processing, qualified for automotive
applications.
2. Features
2.1 Software enabled video and multimedia entertainment platform
I Fixed basic hardware platform
N Digital video input and output
N Digital audio output
N DDR2 SDRAM interface (JEDEC compliant)
N USB 2.0
N I2C-bus
I Built-in flexibility for multimedia processing through programmable GPIO interfaces
N Digital video input and output
N Digital audio input and output
I Built-in flexibility for connectivity through programmable GPIO interfaces
N EXtended I/O functions (XIO) for Hard Disc Drives (HDD), CD or DVD
N Host interface
N PCI 2.2
N USB High-Speed On-The-Go (OTG)
N Clocks and generic signals

No Preview Available !

NXP Semiconductors
PNX9530; PNX9531; PNX9535
Software enabled video and multimedia entertainment platform
2.2 Dual video MPEG decoding and rendering
I Decodes two video streams in parallel
I Renders each video stream on different video screens
I Independent control of each video stream
I Independent On-Screen Display (OSD) for each video stream
2.3 Video quality
I Outstanding array of proprietary video post-processing algorithms (available on
dedicated request and commercial agreement; please contact NXP; see Section 22)
for:
N Color correction
N Image noise reduction
N Sharpness enhancement
N Natural motion
N Error concealment
N MPEG artifact reduction
N Film detection
N Deinterlacing and edge dependent deinterlacing
N Panorama scaling
N Contrast enhancement
N Blue stretch, green enhancement and skin tone control
N Adaptive backlight dimming
N Auto picture control
N Video format scaling
2.4 Memory
I External DDR2 SDRAM memory configuration options
Remark: The DDR interface is capable to operate DDR1 memories also, but this
function will not be guaranteed.
N 32-bit data width
N 16-bit data width
N Footprint up to 1 Gb
N Data rate up to 533 MHz
N Recommended device MT47H16M16BG-37E
I EEPROM for external booting
I FLASH memory through XIO interface
2.5 Miscellaneous
I Only one external quartz crystal required
I Several power modes
I 5 V tolerant interface pins for GPIO, PCI, XIO, I2C-bus, USB and host interface
I Qualified automotive grade 3 according to AEC-Q100
PNX9530_PNX9531_PNX9535_1
Preliminary data sheet
Rev. 01.11C — 1 October 2009
© NXP B.V. 2009. All rights reserved.
2 of 72

No Preview Available !

NXP Semiconductors
PNX9530; PNX9531; PNX9535
Software enabled video and multimedia entertainment platform
3. Applications
3.1 Benefits from using PNX9530; PNX9531; PNX9535
I Experience:
N Enables the consumer to enjoy music and movies that they bring into their car on
portable media and personal devices
N Displays of up to two video sources in-car (dual video)
N High-quality processing of video from a range of sources and in different formats
N Turns even problematic video sources into high-quality video experience
I Product design:
N Software enabled processor flexible enough to address a wide variety of use case
combinations, including dual video decoding
N Design various differentiating in-car multimedia products with the same
entertainment platform
N Use available ecosystem of independent software partners to enable fast
time-to-market of new features
N Synergistic integration with other in-car digital systems
N Significantly reduces system Bill Of Materials (BOM)
3.2 Typical applications with PNX9530; PNX9531; PNX9535
I Front Seat Entertainment (FSE) system
I Rear Seat Entertainment (RSE) system
I DVD or CD playback device, including SoftWare (SW) navigator
I USB, SD card or HDD audio/video playback device
I JPEG viewer for digital camera images
I Dual video decoding and rendering device
I In-car video source decoding
I Video broadcast source decoding
I WiFi audio/video streaming (DLNA compliant)
I Bluetooth audio streaming to headphones
I Extensive library of picture improvement algorithms
PNX9530_PNX9531_PNX9535_1
Preliminary data sheet
Rev. 01.11C — 1 October 2009
© NXP B.V. 2009. All rights reserved.
3 of 72

No Preview Available !

NXP Semiconductors
PNX9530; PNX9531; PNX9535
Software enabled video and multimedia entertainment platform
4. Ordering information
Table 1. Ordering information
Type number
Package
Name
Description
PNX9530E
BGA456 plastic ball grid array package; 456 balls; body 27 × 27 × 1.75 mm
PNX9531E
BGA456 plastic ball grid array package; 456 balls; body 27 × 27 × 1.75 mm
PNX9535E
BGA456 plastic ball grid array package; 456 balls; body 27 × 27 × 1.75 mm
4.1 Ordering options
Table 2. Main type differences
Parameter
Maximum internal TM clock frequency
Width of DDR2 interface
Video input channels
PNX9530
351
32
up to 3
PNX9531
450
32
up to 3
PNX9535
243
16
1
Version
SOT795-1
SOT795-1
SOT795-1
Unit
MHz
bit
-
PNX9530_PNX9531_PNX9535_1
Preliminary data sheet
Rev. 01.11C — 1 October 2009
© NXP B.V. 2009. All rights reserved.
4 of 72

No Preview Available !

NXP Semiconductors
5. Block diagram
PNX9530; PNX9531; PNX9535
Software enabled video and multimedia entertainment platform
DDR2 memory interface
(266 MHz, 16/32 bit data width)
24
video input
(TU656,
transport stream
RGB)
PPNNX9X5935030
PNX9531
PNX9535
VIDEO PROCESSING
MEMORY INTERFACE
(DDR2)
DVD
DESCRAMBLER
INPUT
ROUTER
VIDEO INPUT
PROCESSOR
FAST GENERAL
PURPOSE
INTERFACE
VIDEO
COMPOSITION
PROCESSOR
MEMORY BASED
SCALER
OUTPUT
ROUTER
24*
video output 1
(RGB, 656 HV, sync)
24* video output 2
(RGB, 656 HV, sync)
audio input 1*
(8 channels I2S)
audio input 2*
(8 channels I2S)
8 GPIO
JTAG
I2C
POR_IN_N
RESET_IN_N
AUDIO PROCESSING
AUDIO INPUT 1
AUDIO INPUT 2
AUDIO OUTPUT 1
AUDIO OUTPUT 2
GPIO,
TIMERS,
COUNTERS,
SEMAPHONES
TriMedia
PROCESSOR
(TM3282)
CO-
PROCESSOR
TM
TRACE
COMMUNICATION UNIT
USB
INTERFACE
PCI
XIO
HOST
INTERFACE
EJTAG
MAIN CONTROL
(pc communication
boot management
reset and clock generator)
XTAL_IN
XTAL_OUT
audio output 1*
(8 channels I2S)
audio output 2*
(8 channels I2S)
USB 2.0 (OTG)
PCI 2.2
(33 MHz, 32-bit)
16 host processor
interface*
SYS_RESET_OUT_N
CLKOUT
27 MHz
crystal
001aaj939
Fig 1.
Showing the maximum configuration of the multifunctional GPIO interface. Not all choices may be possible at the same time
(see Section 8.1).
Block diagram of PNX9530; PNX9531; PNX9535
PNX9530_PNX9531_PNX9535_1
Preliminary data sheet
Rev. 01.11C — 1 October 2009
© NXP B.V. 2009. All rights reserved.
5 of 72