R-78E5.0-0.5.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 R-78E5.0-0.5 데이타시트 다운로드

No Preview Available !

Features
Switching
Regulator
• Low cost switching regulator
• High start-up current capability
• Efficiency up to 95%
• Short circuit protection
• Pin compatible with 78 series regulators
• Non isolated DC-DC converter
• IEC/EN60950-1+ AM2 certified
DC/DC Converter
R-78E-0.5
Description
The R-78E series is a switching regulator module that has been designed to offer all the advantages of a
switching regulator (high efficiency, wide input range, accurate output voltage regulation) but with a low
cost for production quantities. Due to the R-78E’s high efficiency of up to 95% no heat-sink is required.
The compact TO-220 compatible SIP3 package measures only 11.6 x 8.5 x 10.4mm, so it saves
precious board space.
0.5 Amp
SIP3
Single Output
Selection Guide
Part
Number
Input
Voltage Range
[VDC]
Output Output Efficiency (1)
Max. Capacitive
Voltage Current @ min Vin @max. Vin
Load (2)
[VDC] [A] [%] [%]
[µF]
R-78E3.3-0.5
6-28
3.3 0.5 75 88
220
R-78E5.0-0.5
7-28
5 0.5 82 92
220
R-78E9.0-0.5 12-28
9 0.5 89 94
220
R-78E12-0.5
15-28
12 0.5 92 95
220
R-78E15-0.5
18-28
15 0.5 93 95
220
Notes:
Note1: Efficiency is tested at nom. input voltage and full load
Note2: Max. Cap Load is tested by nominal input and full resistive load
Model Numbering
R-78E__-0.5
Output Voltage
Output Current
IEC60950-1 certified
EN60950-1 certified
Specifications (measured @ Ta= 25°C, full load, nominal input voltage and after warm-up)
BASIC CHARACTERISTICS
Parameter
Condition
Input Voltage Range
nom. Vin = 24VDC
Quiescent Current
Minimum Load (3)
Internal Operating Frequency
Output Ripple and Noise (4)
20MHz BW
3.3, 5, 9Vout
12, 15Vout
Min. Typ. Max.
6VDC
24VDC
28VDC
1.5mA
2%
570kHz
50mVp-p
70mVp-p
Notes:
Note3: recommend to use with more than 2% load, if not, the ripple of the product may exceeds the
specification, but doesn’t affect the reliability of the product
Note4: Measurements are made with a 100nF MLCC across output (low ESR)
continued on next page
www.recom-power.com
REV.: 4/2019
I-1

No Preview Available !

R-78E-0.5
DC/DC Converter
Specifications (measured @ Ta= 25°C, full load, nominal input voltage and after warm-up)
Series
Efficiency vs Load
R-78E5.0-0.5
100
90
80
70
60
50
40
30 7Vin
20
12Vin
24Vin
10 28Vin
0
0 10 20 30 40 50 60 70 80 90 100
Output Load [%]
REGULATIONS
Parameter
Output Accuracy
Line Regulation
Load Regulation
PROTECTIONS
Parameter
Short Circuit Protection (SCP)
ENVIRONMENTAL
Parameter
Operating Temperature Range
Maximum Case Temperature
Vibration
MTBF
Derating Graph
www.recom-power.com
Condition
low line to high line, full load
10% to 100% load
Condition
Condition
natural convection and with derating (see graph)
according to MIL-HDBK-217F, G.B.
+25°C
+70°C
100
90
80
70
60
50
40
30
20
10
0
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100
Ambient Temperature [°C]
85
REV.: 4/2019
Value
±3.0% typ.
±0.5% typ.
±1.0% typ.
Value
continuous, automatic recovery
Value
-40°C to +85°C
100°C
10-55Hz, 2G, 30min along X,Y,Z
7976 x 103 hours
2182 x 103 hours
I-2

No Preview Available !

R-78E-0.5
DC/DC Converter
Specifications (measured @ Ta= 25°C, full load, nominal input voltage and after warm-up)
Series
SAFETY AND CERTIFICATIONS
Certificate Type (Safety)
Information Technology Equipment, General Requirements for Safety
EAC
RoHs 2+
Report / File Number
1603123
RU-AT.49.09571
Standard
IEC60950-1:2005, 2nd Edition + AM 2:2013
EN60950-1:2006 + AM2:2013
TP TC 004/2011
RoHS 2011/65/EU + AM2015/863
EMC Compliance
Electromagnetic compatibility of multimedia equipment -
Emission requirements
EMC Filter Suggestion according to EN55032
Condition
with external filter
(see filter suggestion below)
+Vin
C1
L1
C2
R-78Exx-0.5
+Vin +Vout
GND
Standard / Criterion
EN55032, Class A and B
+Vout
GND GND
Component List Class A
Component List Class B
MODEL
C1 L1
MODEL
C1 C2 L1
R-78E3.3-0.5
R-78E15-0.5
4.7µF
50V MLCC
3.9µH choke
RLS-397
R-78E3.3-0.5
R-78E15-0.5
10µF
100V MLCC
4.7µF
50V MLCC
12µH choke
RLS-126
Notes:
Note5: Filter suggestions are valid for indicated part numbers only. For other part numbers, please contact RECOM tech support for advice
DIMENSION and PHYSICAL CHARACTERISTICS
Parameter
Material
Package Dimension (LxWxH)
Package Weight
Dimension Drawing (mm)
Condition
case
potting
Value
non-conductive black plastic, (UL94 V-0)
silicone, (UL94 V-0)
11.6 x 8.5 x 10.4mm
2g typ.
embossed logo
11.6 8.5
www.recom-power.com
Marking
0.70+0.10/-0.05
5.08 3.21
0.25±0.05
Recommended Footprint Details
123
Bottom View
Top View
123
2.54
REV.: 4/2019
Pin Connections
Pin # Function
1 +Vin
2 GND
3 +Vout
Tolerance: xx.x= ±0.50mm
xx.xx= ±0.25mm
I-3

No Preview Available !

R-78E-0.5
DC/DC Converter
Specifications (measured @ Ta= 25°C, full load, nominal input voltage and after warm-up)
Series
INSTALLATION AND APPLICATION
Standard Application
+VIN
R-78Exx-0.5
+VOUT
C1
10µF MLCC
(optional)
C2
10µF MLCC
(optional)
GND GND
Notes:
Note6: The R-78Exx-0.5 can not be used as positive to negative converter
PACKAGING INFORMATION
Parameter
Packaging Dimension (LxWxH)
Packaging Quantity
Storage Temperature Range
Type
tube
Value
520.0 x 11.2 x 18.2mm
42pcs
-55°C to +125°C
The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The
products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause
loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized
use of RECOM products in such safety-critical applications.
www.recom-power.com
REV.: 4/2019
I-4