JS1-24V-F.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 JS1-24V-F 데이타시트 다운로드

No Preview Available !

1a/1c 10A cubic type
power relay
JSVDE
JS RELAYS
FEATURES
• Miniature size with universal terminal
footprint
• High contact capacity: 10 A
• TV-5 type available (Standard type)
1 Form A type TV-5
1 Form C type TV-5 (N.O. side only)
• VDE, TÜV also approved
• Sealed construction for automatic
cleaning (Standard type)
• Class B and F coil insulation type
also available.
• EN60335-1 GWT compliant
(Tested by VDE) type available
• Surge voltage 6 kV type also
available
• Special type for high ambient
temperature (105°C) available
TYPICAL APPLICATIONS
1. Home appliances
Air conditioner, heater, etc.
2. Office machines
PPC, facsimile, etc.
3. Vending machines
ORDERING INFORMATION
JS F
Contact arrangement
1: 1 Form C (Standard)
1a: 1 Form A (Standard)
1aP: 1 Form A (Long endurance type)
Protective construction
Nil: Sealed type
F: Flux-resistant type
Coil insulation class
Nil: Class E insulation
B: Class B insulation
F: Class F insulation
Nominal coil voltage (DC)
5V, 6V, 9V, 12V, 18V, 24V, 48V
Contact material
F: AgSnO2 type
Flame resistance and tracking resistance
Nil: –
TT: EN60335-1 (Conform)
Surge voltage
6K: 6kV type
Standard: UL, CSA, VDE, TÜV (Standard type)
UL, CSA, VDE (Long endurance type and EN60335-1 GWT compliant type)
UL, CSA (Surge voltage 6kV type)
Notes: 1. When ordering TV rated (TV-5) types, add suffix -TV.
2. Contact arrangement 1aP type is Flux-resistant type only (Class B insulation only).
ds_61B05_en_js: 080413D
1

No Preview Available !

JS
TYPES
Contact arrangement
Nominal coil voltage
Sealed type
Part No.
Flux-resistant type
Part No.
5V DC
JS1a-5V-F
JS1aF-5V-F
6V DC
JS1a-6V-F
JS1aF-6V-F
1 Form A
(Standard)
9V DC
12V DC
18V DC
JS1a-9V-F
JS1a-12V-F
JS1a-18V-F
JS1aF-9V-F
JS1aF-12V-F
JS1aF-18V-F
24V DC
JS1a-24V-F
JS1aF-24V-F
48V DC
JS1a-48V-F
JS1aF-48V-F
5V DC
JS1aPF-B-5V-F
6V DC
JS1aPF-B-6V-F
1 Form A
Long endurance type
9V DC
12V DC
18V DC
JS1aPF-B-9V-F
JS1aPF-B-12V-F
JS1aPF-B-18V-F
24V DC
JS1aPF-B-24V-F
48V DC
JS1aPF-B-48V-F
5V DC
JS1-5V-F
JS1F-5V-F
6V DC
JS1-6V-F
JS1F-6V-F
1 Form C
(Standard)
9V DC
12V DC
18V DC
JS1-9V-F
JS1-12V-F
JS1-18V-F
JS1F-9V-F
JS1F-12V-F
JS1F-18V-F
24V DC
JS1-24V-F
JS1F-24V-F
48V DC
JS1-48V-F
JS1F-48V-F
Standard packing Carton: 100 pcs. Case: 500 pcs.
Notes: 1. Class B and F coil insulation types available.
Ex) JS1aF-B-12V-F, JS1aF-F-12V-F
2. EN60335-1 GWT compliant types available. When ordering, please add suffix “TT”.
Ex) JS1aF-B-12V-FTT
Contact arrangement
Nominal coil voltage
Sealed type
Part No.
Flux-resistant type
Part No.
5V DC
JS1a-5V-FTT
JS1aF-5V-FTT
6V DC
JS1a-6V-FTT
JS1aF-6V-FTT
1 Form A
(Standard)
9V DC
12V DC
18V DC
JS1a-9V-FTT
JS1a-12V-FTT
JS1a-18V-FTT
JS1aF-9V-FTT
JS1aF-12V-FTT
JS1aF-18V-FTT
24V DC
JS1a-24V-FTT
JS1aF-24V-FTT
48V DC
JS1a-48V-FTT
JS1aF-48V-FTT
5V DC
– JS1aPF-B-5V-FTT
6V DC
– JS1aPF-B-6V-FTT
1 Form A
Long endurance type
9V DC
12V DC
18V DC
– JS1aPF-B-9V-FTT
– JS1aPF-B-12V-FTT
– JS1aPF-B-18V-FTT
24V DC
– JS1aPF-B-24V-FTT
48V DC
– JS1aPF-B-48V-FTT
5V DC
JS1-5V-FTT
JS1F-5V-FTT
6V DC
JS1-6V-FTT
JS1F-6V-FTT
1 Form C
(Standard)
9V DC
12V DC
18V DC
JS1-9V-FTT
JS1-12V-FTT
JS1-18V-FTT
JS1F-9V-FTT
JS1F-12V-FTT
JS1F-18V-FTT
24V DC
JS1-24V-FTT
JS1F-24V-FTT
48V DC
JS1-48V-FTT
JS1F-48V-FTT
3. Surge voltage 6kV types available. When ordering, please add suffix “6K” (except for Long endurance type and EN60335-1 GWT compliant type).
Ex) JS1aF-B-12V-F-6K
2 ds_61B05_en_js: 080413D

No Preview Available !

JS
RATING
1. Coil data
Nominal coil
voltage
5V DC
6V DC
9V DC
12V DC
18V DC
24V DC
48V DC
Pick-up voltage
(at 20C 68F)
70%V or less of
nominal voltage
(Initial)
Drop-out voltage
(at 20C 68F)
10%V or more of
nominal voltage
(Initial)
Nominal operating
current
[10%] (at 20C 68F)
72 mA
60 mA
40 mA
30 mA
20 mA
15 mA
7.5mA
Coil resistance
[10%] (at 20C 68F)
69.4
100
225
400
900
1,600
6,400
Nominal operating
power
(at 20C 68F)
Max. applied voltage
(at 70C 158F)
360mW
130%V of
nominal voltage
[When using relays at
85C 185F, see Note*]
Note: * When using relays in a high ambient temperature, consider the pick-up voltage rise due to the high temperature (a rise of approx. 0.4% V for each 1C 33.8F with
20C 68F as a reference) and use a coil impressed voltage that is within the maximum applied voltage range.
2. Specifications
Characteristics
Contact
Item
Contact material
Contact resistance (Initial)
Arrangement
Specifications
AgSnO2 type
Max. 100 m(By voltage drop 6 V DC 1A)
1 Form A, 1 Form C
1 Form A Long endurance type
Rating
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Nominal operating power
10 A 250 V AC (NO), 10 A 125 V AC,
6 A 277 V AC, 5 A 30 V DC
10 A 250 V AC, 10 A 277 V AC, 5 A 30 V DC
2,500VA 150W (NO), 1,662VA 150W (NC)
2,770VA 150W
250V AC, 100V DC (0.5A)
10A (AC), 5A (DC)
360mW
Electrical
characteristics
Mechanical
characteristics
Min. switching capacity*1
Insulation resistance (Initial)
Breakdown voltage Between open contacts
(Initial)
Between contact and coil
Temperature rise (coil)
Operate time (at nominal voltage) (at 20C 68F)
Release time (at nominal voltage) (at 20C 68F)
Shock resistance
Functional
Destructive
Functional
Vibration resistance
Destructive
Mechanical (at 180 times/min.)
Expected life
Electrical (resistive load)
Conditions
Conditions for operation, transport and storage*2
Max. operating speed
100mA, 5V DC
Min. 100M(at 500V DC) Measurement at same location as “Breakdown voltage” section.
750 Vrms for 1 min. (Detection current: 10 mA)
1,500 Vrms for 1 min. (Detection current: 10 mA)
Max. 35C 95F (By resistive method, nominal coil voltage applied to the coil;
contact carrying current: 10A, at 70C 158F)
Max. 10 ms (excluding contact bounce time.)
Max. 10 ms (excluding contact bounce time) (Without diode)
98 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10s.)
980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10s.)
10 to 55 Hz at double amplitude of 2 mm
Min. 107
1105
[10A 125V AC, 6A 277V AC, 5A 30V DC]
5104 (NO contact only)
[10A 250V AC]
2105
[10A 277V AC]
1.5105
[10A 250V AC (at 20 times/min., 105C 221F)]
1105
[5A 30V DC]
–40C to +70C –40F to +158F
(Class E insulation)
–40C to +85C –40F to +185F
(Class B insulation)*3
–40C to +105C –40F to +221F
(Class F insulation)*3
Humidity: 5 to 85% R.H. (Not freezing and
condensing at low temperature)
–40C to +105C –40F to +221F*3;
Humidity: 5 to 85% R.H. (Not freezing and
condensing at low temperature)
20 times/min. (at nominal switching capacity)
Unit weight
Approx. 12 g .423 oz
Notes:
*1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
*2. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to “6. Usage, Storage and Transport
Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
*3. When using relays in a high ambient temperature, consider the pick-up voltage rise due to the high temperature (a rise of approx. 0.4% V for each 1C 33.8F with 20C
68F as a reference) and use a coil impressed voltage that is within the maximum applied voltage range.
ds_61B05_en_js: 080413D
3

No Preview Available !

JS
REFERENCE DATA
1. Maximum value for switching capacity
100
AC resistive load
10
1 DC resistive load
10 30 100
Contact voltage, V
3. Life curve
Ambient temperature: Room temperature
100
125V AC resistive load
10
1
0 1 2 3 4 5 6 7 8 9 10
Contact current, A
2.-(1) Coil temperature rise
Sample: 5 pcs., JS1a-24V-F
Measured portion: Inside the coil
Contact current: 5 A
60
50 26°C
40
70°C
85°C
30
20
10
0 100
120 140 160
Coil applied voltage, %V
4. Operate/release time
Sample: 25 pcs., JS1-12V-F
10
Operate time
8
6
4
Release time
2
M–x ax.
Min.
M–x ax.
Min.
0
80
100 120 140
Coil applied voltage, %V
2.-(2) Coil temperature rise
Sample: 5 pcs., JS1a-24V-F
Measured portion: Inside the coil
Contact current: 10 A
60
50
40
26°C
70°C
85°C
30
20
10
0 100
120 140 160
Coil applied voltage, %V
5. Ambient temperature characteristics
Sample: 6 pcs., JS1-12V-F
Pick-up voltage
20
10 Drop-out voltage
–60 –40 –20 0
20 40 60 80
Ambient
–10 temperature °C
–20
DIMENSIONS (mm inch)
Download CCAAD DDaattaa from our Web site.
CAD Data
External dimensions
0.24
.009
0.8
.031
16
.630
0.4
.016
3.9
.154
0.8
.031
Schematic
(Bottom view)
1 Form A
COIL
COM
N.O.
1 Form C
0.4
.016
16
.630
1.2
.047
2
1
5
3 N.O.
4 N.C.
2.3
.091
2
.079
12.2
.480
22
.866
12
.472
0.4
.016
COIL
Note: Terminal No. 4 is only for Standard
1 Form C type
Dimension:
Less than 1mm .039inch:
Min. 1mm .039inch less than 3mm .118 inch:
Min. 3mm .118 inch:
General tolerance
0.1 .004
0.2 .008
0.3 .012
COM
N.O.
N.C.
PC board pattern
(Bottom view)
1 Form A
(Standard, High Power)
4-1.3 dia.
4-.051 dia.
12
.472
2
.079
12.2
.480
1 Form C
(Standard)
5-1.3 dia.
5-.051 dia.
12
.472
2
.079
12.2
.480
Tolerance: 0.1 .004
4 ds_61B05_en_js: 080413D

No Preview Available !

JS
SAFETY STANDARDS
UL/C-UL (Recognized)
CSA (Certified)
VDE (Certified)
TV rating (UL/CSA)
TÜV (Certified)
File No.
Contact rating
File No. Contact rating File No.
Contact rating
File No.
Rating
File No.
Rating
E43028
10A 125V AC, 6A 277V AC
5A 30V DC, 1/8HP 125V AC
1/8HP 277V AC
12A 125V AC (N.O., N.C.)
12A 277V AC (N.O., N.C.)
10A 125V AC (N.O., N.C.)
85C
5A 125V AC (N.O., N.C.)
105C, Class B insulation
4FLA/4LRA125V AC 105C
2FLA/4LRA125V AC 105C
1/3HP 125V AC 75C N.O.
1/3HP 277V AC 75C N.O.
6FLA/6LRA125V AC 85C
(N.O.)
LR26550
10A 125V AC
12A 125V AC
6A 277V AC
12A 277V AC
5A 30V DC
1/8HP 125V AC
1/8HP 277V AC
40011475 10A 125V AC (cos=1.0) UL
1aTV-5
B 10 02 10A 125V AC (cos=1.0)
5A 30V DC (0ms)
E43028 1cTV-5 (N.O.) 13461 271 6A 250V AC (cos=1.0)
6A 250V AC (cos=1.0) CSA
5A 30V DC (0ms)
LR26550
For Cautions for Use, see Relay Technical Information.
ds_61B05_en_js: 080413D
5