P4KE62A.pdf 데이터시트 (총 6 페이지) - 파일 다운로드 P4KE62A 데이타시트 다운로드

No Preview Available !

Axial Lead Transient Voltage Suppressors (TVS)
P4KE Series 6.8 To 600 V 400W
Description
The P4KE series is designed specifically to protect sensitive electronic
equipment from voltage transients induced by lightning and other transient
voltage events.
Features
u Glass passivated chip junction in DO-41 Package
u Low leakage
u Uni and Bidirectional unit
u Excellent clamping capability
u 400W Peak power capability at 10 × 1000µs waveform Repetition rate
(duty cycle):0.01%
u Fast response time: typically less than 1.0ps from 0 Volts to VBR min
u Typical IR less than 5μA above 12V.
u High Temperature soldering: 260°C/40 seconds at terminals
u Typical maximum temperature coefficient ΔVBR = 0.1% ×
VBR@25°C× ΔT
u Plastic package has Underwriters Laboratory Flammability 94V-0
u Matte tin leadfree Plated
u Halogen free and RoHS compliant
u Typical failure mode is short from over-specified voltage or current
u Whisker test is conducted based on JEDEC JESD201A per its table
4a and 4c
u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
u ESD protection of data lines in accordance with IEC 61000-4-2
(IEC801-2)
u EFT protection of data lines in accordance with IEC 61000-4-4
(IEC801-4)
Uni-directional
Bi-directional
Functional Diagram
Bi-directional
Cathode
Uni-direction
Agency Approvals
Anode
Applications
TVS devices are ideal for the protection of I/O interfaces, VCC bus and other
vulnerable circuits used in Telecom, Computer, Industrial and Consumer
electronic applications.
AGENCY
AGENCY FILE NUMBER
E341027
Maximum Ratings (TA=25unless otherwise noted)
Parameter
Symbol
Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note
1), (Note 2)
Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3)
Power Dissipation on Infinite Heat Sink at TL=75°C
Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3)
Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only
(Note 4)
PPPM
IPP
PM(AV)
IFSM
VF
Operating junction and Storage Temperature Range.
TJ , TSTG
Notes:
1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2.
2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V.
Value
400
See Next Table
1.0
40
3.5/5.0
-55 to +150
Unit
Watts
Amps
Watt
Amps
Voltage
°C
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
1/6
www.socay.com
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.

No Preview Available !

Axial Lead Transient Voltage Suppressors (TVS)
P4KE Series 6.8 To 600 V 400W
Electrical Characteristics (TA=25unless otherwise noted)
Part Number
Uni
P4KE6.8
P4KE6.8A
P4KE7.5
P4KE7.5A
P4KE8.2
P4KE8.2A
P4KE9.1
P4KE9.1A
P4KE10
P4KE10A
P4KE11
P4KE11A
P4KE12
P4KE12A
P4KE13
P4KE13A
P4KE15
P4KE15A
P4KE16
P4KE16A
P4KE18
P4KE18A
P4KE20
P4KE20A
P4KE22
P4KE22A
P4KE24
P4KE24A
P4KE27
P4KE27A
P4KE30
P4KE30A
P4KE33
P4KE33A
P4KE36
P4KE36A
P4KE39
P4KE39A
P4KE43
P4KE43A
P4KE47
P4KE47A
P4KE51
P4KE51A
P4KE56
P4KE56A
P4KE62
P4KE62A
P4KE68
P4KE68A
P4KE75
P4KE75A
P4KE82
P4KE82A
Bi
P4KE6.8C
P4KE6.8CA
P4KE7.5C
P4KE7.5CA
P4KE8.2C
P4KE8.2CA
P4KE9.1C
P4KE9.1CA
P4KE10C
P4KE10CA
P4KE11C
P4KE11CA
P4KE12C
P4KE12CA
P4KE13C
P4KE13CA
P4KE15C
P4KE15CA
P4KE16C
P4KE16CA
P4KE18C
P4KE18CA
P4KE20C
P4KE20CA
P4KE22C
P4KE22CA
P4KE24C
P4KE24CA
P4KE27C
P4KE27CA
P4KE30C
P4KE30CA
P4KE33C
P4KE33CA
P4KE36C
P4KE36CA
P4KE39C
P4KE39CA
P4KE43C
P4KE43CA
P4KE47C
P4KE47CA
P4KE51C
P4KE51CA
P4KE56C
P4KE56CA
P4KE62C
P4KE62CA
P4KE68C
P4KE68CA
P4KE75C
P4KE75CA
P4KE82C
P4KE82CA
Reverse
Stand-Off
Voltage
VRWM (V)
5.5
5.8
6.1
6.4
6.6
7.0
7.4
7.8
8.1
8.6
8.9
9.4
9.7
10.2
10.5
11.1
12.1
12.8
12.9
13.6
14.5
15.3
16.2
17.1
17.8
18.8
19.4
20.5
21.8
23.1
24.3
25.6
26.8
28.2
29.1
30.8
31.6
33.3
34.8
36.8
38.1
40.2
41.3
43.6
45.4
47.8
50.2
53.0
55.1
58.1
60.7
64.1
66.4
70.1
Breakdown
Voltage VBR (V)
@IT
MIN
6.12
6.46
6.75
7.13
7.38
7.79
8.19
8.65
9.00
9.50
9.90
10.45
10.80
11.40
11.70
12.35
13.50
14.25
14.40
15.20
16.20
17.10
18.00
19.00
19.80
20.90
21.60
22.80
24.30
25.65
27.00
28.50
29.70
31.35
32.40
34.20
35.10
37.05
38.70
40.85
42.30
44.65
45.90
48.45
50.40
53.20
55.80
58.90
61.20
64.60
67.50
71.25
73.80
77.90
MAX
7.48
7.14
8.25
7.88
9.02
8.61
10.01
9.56
11.00
10.50
12.10
11.55
13.20
12.60
14.30
13.65
16.50
15.75
17.60
16.80
19.80
18.90
22.00
21.00
24.20
23.10
26.40
25.20
29.70
28.35
33.00
31.50
36.30
34.65
39.60
37.80
42.90
40.95
47.30
45.15
51.70
49.35
56.10
53.55
61.60
58.80
68.20
65.10
74.80
71.40
82.50
78.75
90.20
86.10
Test
Current
IT (mA)
10
10
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum
Clamping
Voltage VC
@IPP (V)
10.8
10.5
11.7
11.3
12.5
12.1
13.8
13.4
15.0
14.5
16.2
15.6
17.3
16.7
19.0
18.2
22.0
21.2
23.5
22.5
26.5
25.2
29.1
27.7
31.9
30.6
34.7
33.2
39.1
37.5
43.5
41.4
47.7
45.7
52.0
49.9
56.4
53.9
61.9
59.3
67.8
64.8
73.5
70.1
80.5
77.0
89.0
85.0
98.0
92.0
108.0
103.0
118.0
113.0
Maximum
Peak
Pulse
Current
IPP (A)
37.04
38.10
34.19
35.40
32.00
33.06
28.99
29.85
26.67
27.59
24.69
25.64
23.12
23.95
21.05
21.98
18.18
18.87
17.02
17.78
15.09
15.87
13.75
14.44
12.54
13.07
11.53
12.05
10.23
10.67
9.20
9.66
8.39
8.75
7.69
8.02
7.09
7.42
6.46
6.75
5.90
6.17
5.44
5.71
4.97
5.19
4.49
4.71
4.08
4.35
3.70
3.88
3.39
3.54
Maximum
Reverse
Leakage IR
@VRWM
(μA)
1000
1000
500
500
200
200
50
50
10
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
2/6
www.socay.com
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.

No Preview Available !

Axial Lead Transient Voltage Suppressors (TVS)
P4KE Series 6.8 To 600 V 400W
Electrical Characteristics (TA=25unless otherwise noted) (Continue)
Part Number
Uni Bi
Reverse
Stand-Off
Voltage
VRWM (V)
Breakdown
Voltage VBR (V)
@IT
MIN MAX
P4KE91
P4KE91C
73.7
81.90
100.10
P4KE91A
P4KE91CA
77.8
86.45
95.55
P4KE100
P4KE100C
81.0
90.00
110.00
P4KE100A
P4KE100CA
85.5
95.00
105.00
P4KE110
P4KE110C
89.2
99.00
121.00
P4KE110A
P4KE110CA
94.0
104.50
115.50
P4KE120
P4KE120C
97.2
108.00
132.00
P4KE120A
P4KE120CA
102.0
114.00
126.00
P4KE130
P4KE130C
105.0
117.00
143.00
P4KE130A
P4KE130CA
111.0
123.50
136.50
P4KE150
P4KE150C
121.0
135.00
165.00
P4KE150A
P4KE150CA
128.0
142.50
157.50
P4KE160
P4KE160C
130.0
144.00
176.00
P4KE160A
P4KE160CA
136.0
152.00
168.00
P4KE170
P4KE170C
138.0
153.00
187.00
P4KE170A
P4KE170CA
145.0
161.50
178.50
P4KE180
P4KE180C
146.0
162.00
198.00
P4KE180A
P4KE180CA
154.0
171.00
189.00
P4KE200
P4KE200C
162.0
180.00
220.00
P4KE200A
P4KE200CA
171.0
190.00
210.00
P4KE220
P4KE220C
175.0
198.00
242.00
P4KE220A
P4KE220CA
185.0
209.00
231.00
P4KE250
P4KE250C
202.0
225.00
275.00
P4KE250A
P4KE250CA
214.0
237.50
262.50
P4KE300
P4KE300C
243.0
270.00
330.00
P4KE300A
P4KE300CA
256.0
285.00
315.00
P4KE350
P4KE350C
284.0
315.00
385.00
P4KE350A
P4KE350CA
299.3
332.50
367.50
P4KE380
P4KE380C
308.6
342.00
418.00
P4KE380A
P4KE380CA
324.9
361.00
399.00
P4KE400
P4KE400C
324.8
360.00
440.00
P4KE400A
P4KE400CA
342.0
380.00
420.00
P4KE440
P4KE440C
357.3
396.00
484.00
P4KE440A
P4KE440CA
376.2
418.00
462.00
P4KE500
P4KE500C
406.0
450.00
550.00
P4KE500A
P4KE500CA
427.5
475.00
525.00
P4KE520
P4KE520C
422.2
468.00
572.00
P4KE520A
P4KE520CA
444.6
494.00
546.00
P4KE550
P4KE550C
446.6
495.00
605.00
P4KE550A
P4KE550CA
470.3
522.50
577.50
P4KE600
P4KE600C
487.2
540.00
660.00
P4KE600A
P4KE600CA
513.0
570.00
Note:
1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device
2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices
3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double
630.00
Test
Current
IT (mA)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum
Clamping
Voltage VC
@IPP (V)
131.0
125.0
144.0
137.0
158.0
152.0
173.0
165.0
187.0
179.0
215.0
207.0
230.0
219.0
244.0
234.0
258.0
246.0
287.0
274.0
344.0
328.0
360.0
344.0
430.0
414.0
504.0
482.0
547.2
524.4
576.0
552.0
633.6
607.2
720.0
690.0
748.8
717.6
792.0
759.0
864.0
828.0
Maximum
Peak
Pulse
Current
IPP (A)
3.05
3.20
2.78
2.92
2.53
2.63
2.31
2.42
2.14
2.23
1.86
1.93
1.74
1.83
1.64
1.71
1.55
1.63
1.39
1.46
1.16
1.22
1.11
1.16
0.93
0.97
0.79
0.83
0.73
0.76
0.69
0.72
0.63
0.66
0.56
0.58
0.53
0.56
0.51
0.53
0.46
0.48
Maximum
Reverse
Leakage IR
@VRWM
(μA)
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
3/6
www.socay.com
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.

No Preview Available !

Axial Lead Transient Voltage Suppressors (TVS)
P4KE Series 6.8 To 600 V 400W
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
100
10
1
0.1
0.1
1 10 100
td - Pulse Width (μs)
1000 10000
Figure 3 - Pulse Waveform
150
100
50
tr=10µsec
Peak Value
IPPM
TJ=25°C
Pulse Width(td) is dened
as the point where the peak
current decays to 50% of IPPM
Half Value
IPPM (IPPM/2)
10/1000µsec. Waveform
as dened by R.E.A
tc
0
0 1.0 2.0 3.0
t - Time (ms)
4.0
Figure 5 - Steady State Power Derating Curve
100
80
60
40
20
0
0 25 50 75 100 125 150 175
TA-Ambient temperature(°C)
Figure 4 - Typical Junction Capacitance
10000
1000
Bi-directional
@zero bins
Uni-directional @VRWM
100
Uni-directional
@zero bins
10
Tj=25°C
f=1.0MHz
Vsig=50mVp-p
1
1.0
10.0
Bi-directional @VRWM
100.0
VBR-Reverse Breakdown Voltage (V)
1000.0
Figure 6 - Maximum Non-Repetitive Surge Current
1.0
0.8
0.6
0.4
0.2
0.0
0
25 50 75 100 125 150 175 200
TL - Lead Temperature(°C)
50
40
30
20
10
0
1
TJ=TJ max.
8.3 ms Single Half Sine-Wave
10
Number of Cycles at 60Hz
100
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
4/6
www.socay.com
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.

No Preview Available !

Axial Lead Transient Voltage Suppressors (TVS)
P4KE Series 6.8 To 600 V 400W
I-V Curve Characteristics
Physical Specifications
Weight
Case
Polarity
Terminal
0.012 ounce, 0.3 gram
JEDEC DO-204AL (DO-41) Molded
Plastic over glass passivated junction
Color band denotes cathode except
Bipolar
Matte Tin-plated leads, Solderable per
JESD22-B102D
Soldering Parameters
TP
TL
TS(max)
Ramp-up
TS(min)
25
Preheat
Time to peak temperature
(t 25to peak)
Critical Zone
TL to TP
Ramp-down
Time
Environmental Specifications
Temperature Cycle
Pressure Cooker
High Temp. Storage
HTRB
Thermal Shock
JESD22-A104
JESD22-A102
JESD22-A103
JESD22-A108
JESD22-A106
Reflow Condition
Leadfree assembly
-Temperature Min (Ts(min))
150°C
Pre Heat -Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
Average ramp up rate ( Liquidus Temp TL)
to peak
60 -180 Seconds
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reflow
- Temperature (TL) (Liquidus)
- Time (min to max) (ts)
217°C
60 -150 Seconds
Peak Temperature (TP)
Time within 5°C of
Temperature (tp)
Ramp-down Rate
actual
peak
260 +0/-5°C
20 -40 Seconds
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max
Do not exceed
280°C
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
5/6
www.socay.com
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.