AY391K.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 AY391K 데이타시트 다운로드

No Preview Available !

A Series
PulsEater® Ceramic Composition
Available in E12 Ohmic values
The “A” Series non-inductive, ceramic composite
resistors are designed for a variety of applications
where high energy handling capabilities are crucial.
These resistors are ideal for any application which
is subject to surges, high peak power, or impulse
energy.
Their unique design allows uniform distribution
of energy throughout their structure which results
in low thermal stress. The high-temperature,
solvent-resistant epoxy coating carries a UL94V0
flammability rating which is suitable for almost any
environment.
F eat u res
• High Surge Energy
• Non-Inductive
• Small Size
*AZ style is provided with
dual terminal wires
A pp l ications
• Motor Drives
• Power Supplies, UPS
• Power Conversion
• In-Rush Current Limiting
SERIES SPECIFICATIONS
Resistance1
Series
(ohms)
P
avg.2
(watts)
Impulse
Voltage3
(volts)
Energy4
(joule)
AV
3.3 to 10K
2.0
1000
250
AW
4.7 to 15K
2.5
1500
400
AX
1.0 to 3.3K
3.5
1000
700
AY
2.2 to 6.8K
4.5
2000
1400
AZ
1.5 to 4.7K
5.5
2500
2800
1E12 Standard Values ±10%; 2Free Air 40°C Ambient; 3In Air; 4Single Impulse
c h aracteritics
Resistance Element Bulk Ceramic
Terminals Radial; 100% Sn solder coated radial (60/40 sol-
der available upon request)
Coating UL94V0, solvent resistant epoxy
Tolerance ±10% Standard
Operating Temp. -55°C to 150°C
Range
Derating Derates linearly from 100% @ 50°C to 0% @
150°C
Temperature Rise 100°C @ 100% rated power, 50°C ambient
Mounting clip
D
H
L
Dim. (mm)
Part No. D H L for Series Color
5911E 20 23 13 AX and AY White
5910E 25 26 15 AZ
Black
This saddle clip conforms to
the configuration of Ohmite’s
A Series resistor to provide
secure mounting. Made
of a durable thermoplastic
polyester, the saddle clip is
designed to secure the A
Series in place while safely
withstanding its operat-
ing temperatures. Use (2)
saddle clips per resistor for
extra stability.
Parameter Max. R
Life Test +5%
Single Pulse ±1.5%
Energy
Repetitive HV
Pulsing
Short-time
Overload
Short-term High
Temp
Long-term High
Temp
Thermal Shock
Cycle
Moisture
Resistance
±2.0%
±1.5%
±1.5%
±2.0%
±2.0%
±1.0%
Test Method
MIL-STD-202F, method 108A.
except 50°C, 1000 hrs. @ rated
power; 1.5 hrs. ON, 0.5 hrs. OFF
Single pulse, capacitor discharge
at Rated Energy; 350VDC for AW
and AX sizes; 650VDC for AY and
AZ sizes.
10 joules @ 5.OKV, 10,000 cycles
10x rated power. 5 sec. ON, 5
sec. OFF, 5 cycles
250°C for 30 seconds
1000 hours @ 150°C
MIL-STD-202F, method 107D.
-55°C to +125°C, 5 cycles
90% to 95% rh @ 40°C, 1000 hrs.
(continued)
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
51

No Preview Available !

A Series
PulsEater® Ceramic Composition
Available in E12 Ohmic values
AV - AY
L
DH
4.7mm
S Offset crimp width is
2x terminal wire gauge
Standard Values
d i m ensions
AZ
L
D
16.7mm
S
AZ series also available
with crimps upon request
7.6mm
P
avg.2
Series (watts)
AV
AW
AX
AY
AZ
2.0
2.5
3.5
4.5
5.5
L
max.
(mm)
15
20
15
25
30
D H
max. max.
(mm) (mm)
13 22
13 19
21 26
21 26
26
S Term. wire
norm. gauge Weight
(mm) (AWG) (g)
12.5 20 3.9
17.5 20 5.4
12.5 18
10
22.5 18
19
27 18 33
or d erin g infor m ation
RoHS compliant
AW56GKE
Size
Ohm Value
Tolerance
Example:
K = 10% std.
33G = 3.3 Ohms M = 20%
330 = 33 Ohms
331 = 330 Ohms
Series
Series
Series
Series
Part No.
Part No.
Part No.
Part No.
Prefix
Prefix
Prefix
Prefix
Suffix
Suffix
Suffix
Suffix
1.0 –––10GK
5.6 –––56GK
33 –––330K 220 –––221K  
1.2 –––12GK
6.8 –––68GK
39 –––390K   270 –––271K
1.5 –––15GK 8.2 –––82GK 47 –––470K  
330 –––331K
1.8 –––18GK
10 –––100K   56 –––560K
470 –––471K  
2.2 –––22GK   12 –––120K
68 –––680K 560 –––561K
2.7 –––27GK
15 –––150K  
82 –––820K
680 –––681K
3.3 –––33GK   
18 –––180K
100 –––101K   820 –––821K
3.9 –––39GK  
22 –––220K   120 –––121K
1000 –––102K  
4.7 –––47GK   
27 –––270K
150 –––151K  
Check product availability at www.ohmite.com
180 –––181K
= Standard values Non-standard values subject to a minimum handling charge per item.
52 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com