P0080TA.pdf 데이터시트 (총 7 페이지) - 파일 다운로드 P0080TA 데이타시트 다운로드

No Preview Available !

ELECTRONICS
Transient
Voltage
Suppressors
PxxxxTX Series
DO-214AC/SMA
Circuit Protection
System
Specifications are subject to change without notice.
Please refer to http://www.ruilon.com.cn for current information.

No Preview Available !

Thyristor Surge Suppressors -PxxxxTX Series
Description
DO-214AC/SMA Series are low capacitance devices designed to
protect broadband equipment such as VOIP, DSL modems and
DSLAMs from damaging overvoltage transients.
The series provides a surface mount solution that enables
equipment to comply with global regulatory standards while limiting
the impact to broadband signals.
Features
Compared to surge suppression using other technologies, P Series devices offer absolute surge protection
regardless of the surge current available and the rate of applied voltage (dv/dt). P Series devices:
• Cannot be damaged by voltage
• Eliminate hysteresis and heat dissipation typically found with clamping devices
• Eliminate voltage overshoot caused by fast-rising transients
• Are non-degenerative
• Will not fatigue
• Have low capacitance, making them ideal for high-speed transmission equipment
Part Number Code
Px x x x TX
LOGO
Breakdown Voltage
Type
S:SMD SMB
T:SMD SMA
E:DIP TO-92
L:DIP DO-15
Peak pilse
current-Ipp
8/20μs
A=150A
B=250A
C=400A
Circuit Protection
System
Specifications are subject to change without notice.
Please refer to http://www.ruilon.com.cn for current information. Page:1

No Preview Available !

ElectriaclTChhayrraicstteorirstSicus rge Suppressors -PxxxxTX Series
Type Number
VDRM
V
VBO
V
IH
MA
IS
MA
IT
A
VT CJ
V PF
P0080TA
6 25 50 800 2.2 4 50
P0300TA
25 40 50 800 2.2 4 70
P0640TA
58 77 150 800 2.2 4 50
P0720TA
65 88 150 800 2.2 4 50
P0900TA
75 98 150 800 2.2 4 45
P1100TA
90 130 150 800 2.2 4 45
P1300TA
120 160 150 800
2.2
4
45
P1500TA
140 180 150 800 2.2 4 40
P1800TA
170 220 150 800 2.2 4 40
P2300TA
190 260 150 800 2.2 4 35
P2600TA
220 300 150 800 2.2 4 35
P3100TA
275 350 150 800 2.2 4 30
P3500TA
320 400 150 800 2.2 4 30
Notes:
Is:Switching Current – maximum current required to switch to on state
IDRM:Leakage Current – maximum peak off-state current measured at VDRM
IH:Holding Current – minimum current required to maintain on state
IPP:Peak Pulse Current – maximum rated peak impulse current
IT:On-state Current – maximum rated continuous on-state current
VDRM:Peak Off-state Voltage – maximum voltage that can be applied while maintaining off state
VT:On-state Voltage – maximum voltage measured at rated on-state current
.
SERIES
A
2/10µs
200
8/20µs
150
Peak Pilse Current-lpp(A)
10/160µs
10/560µs
100 60
10/1000µs
50
Circuit Protection
System
Specifications are subject to change without notice.
Please refer to http://www.ruilon.com.cn for current information. Page:2