P0640EA.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 P0640EA 데이타시트 다운로드

No Preview Available !

Thyristor Surge Suppressors (TSS)
P0080EA - P5000EA Series - TO-92 @10/700μS, 2KV
Description
P0080EA - P5000EA Series are designed to protect broadband
equipment such as modems, line card, CPE and DSL from
damaging over-voltage transients.
The series provides a surface mount solution that enables
equipment to comply with global regulatory standards.
Features and Benefits
Low voltage overshoot
Low on-state voltage
Does not degrade surge capability after multiple surge events
within limit
Fails short circuit when surged in excess of ratings
Low Capacitance
Pinout Designation
Applicable Global Standards
TIA-968-A / TIA-968-B
ITU K.20/21 Enhanced level
ITU K.20/21 Basic Level
GR 1089 Inter building
GR 1089 Inter building
IEC 6100-4-5
YD/T 1082
YD/T 993
YD/T 950
Electrical Parameters
Parameter
IS
IDRM
IH
IT
VS
VDRM
VT
C0
Definition
Switching Current - maximum current required to switch to
on state
Leakage Current - maximum peak off-state current
measured at VDRM
Holding Current - minimum current required to maintain on
state
On-state Current - maximum rated continuous on-state
current
Switching Voltage - maximum voltage prior to switching to
on stat
Peak Off-state Voltage - maximum voltage that can be
applied while maintaining off state
On-state Voltage - maximum voltage measured at rated
on-state current
Off-state Capacitance - typical capacitance measured in
off state
Schematic Symbol
+I
IT
IS
IH
IDRM
-V
+V
VT VDRM
VS
-I
SOCAY Electronics Corp., Ltd.
Revision November 18, 2016
1/5
www.socay.com
@SOCAY Electronics Corp., Ltd. 2016
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.

No Preview Available !

Thyristor Surge Suppressors (TSS)
P0080EA - P5000EA Series - TO-92 @10/700μS, 2KV
Electrical Characteristics
Part
Number
Marking
VDRM
@IDRM=5μA
V min
VS
@100V/μS
V max
VT
@IT=2.2A
V max
P0080EA P0080EA
6
25
4
P0300EA P0300EA
25
40
4
P0640EA P0640EA
58
77
4
P0720EA P0720EA
65
88
4
P0900EA P0900EA
75
98
4
P1100EA P1100EA
90
130
4
P1300EA P1300EA
120
160
4
P1500EA P1500EA
140
180
4
P1800EA P1800EA
170
220
4
P2000EA P2000EA
180
220
4
P2300EA P2300EA
190
260
4
P2600EA P2600EA
220
300
4
P3100EA P3100EA
275
350
4
P3500EA P3500EA
320
400
4
P4000EA P4000EA
360
460
4
P4500EA P4500EA
400
540
4
P5000EA P5000EA
440
600
4
Notes:
- Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted).
- Devices are bi-directional.
IS
mA max
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
IT
A max
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
IH
mA min
50
50
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
C0
@1MHz
pF min pF max
25 150
15 140
40 60
35 60
25 55
30 50
25 45
25 40
25 35
20 35
25 35
20 35
20 35
20 35
20 35
20 35
20 35
Surge Ratings
Series
A
2/10μS1
2/10μS2
A min
150
Notes:
1. Current waveform in µs
2. Voltage waveform in µs
8/20μS1
1.2/50μS2
A min
150
10/160μS1
10/160μS2
A min
90
10/560μS1
10/560μS2
A min
50
10/1000μS1
10/1000μS2
A min
45
5/310μS1
10/700μS2
A min
50
ITSM
50/60 Hz
A min
20
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product.
- IPP ratings applicable over temperature range of -40ºC to +85ºC
- The device must initially be in thermal equilibrium with -40°C < TJ < +150°C
di/dt
Amps/µs max
500
Thermal Considerations
Package
Symbol
TJ
TS
RθJA
Parameter
Value
Operating Junction Temperature Range - 40 to + 150
Storage Temperature Range
- 40 to +150
Thermal Resistance: Junction to Ambient
90
Unit
°C
°C
°C/W
SOCAY Electronics Corp., Ltd.
Revision November 18, 2016
2/5
www.socay.com
@SOCAY Electronics Corp., Ltd. 2016
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.

No Preview Available !

Thyristor Surge Suppressors (TSS)
P0080EA - P5000EA Series - TO-92 @10/700μS, 2KV
Characteristic Curves
Figure 1 - V-I Characteristics
Figure 2 - tr × td Pulse Waveform
+I
IT
IS
IH
IDRM
-V
+V
VT VDRM
VS
-I
tr=rise time to peak value
td=decay time to half value
100
Peak
Waveform=tr×td
Value
Waveform=tr×td
50 Half Value
50
tr
0
td
t – Time (μs)
Figure 3 - Normalized VS Change Versus Junction
Temperature
Figure 4 - Normalized DC Holding Current Versus Case
Temperature
14
12
10
8
6
4
2
9
-4
-6
-8
-40 -20 0
25
20 40
60 80 100 120 140 160
Junction Temperature (TJ) -
2.0
1.8
1.6
1.4 25
1.2
1.0
0.8
0.6
0.4 -40 -20
0 20 40 60 80 100 120 140 160
Case Temperature (TC) -
SOCAY Electronics Corp., Ltd.
Revision November 18, 2016
3/5
www.socay.com
@SOCAY Electronics Corp., Ltd. 2016
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.

No Preview Available !

Thyristor Surge Suppressors (TSS)
P0080EA - P5000EA Series - TO-92 @10/700μS, 2KV
Environmental Specifications
High Temp Voltage
Blocking
Temp Cycling
Biased Temp &
Humidity
High Temp Storage
Low Temp Storage
Thermal Shock
Autoclave (Pressure
Cooker Test)
Resistance to Solder
Heat
Moisture Sensitivity
Level
80% Rated VDRM (VAC Peak ) +125°C or +150°C,
Lead Material Copper Alloy High Temp Voltage
Blocking 504 or 1008 hrs. MIL-STD-750 (Method
1040) JEDEC, JESD22-A-101
-65°C to +150°C, 15 min. dwell, 10 up to 100 cycles.
MIL-STD-750 (Method 1051) EIA/JEDEC,
JESD22-A104
52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/
JEDEC, JESD22-A-101
+150°C 1008 hrs. MIL-STD-750 (Method 1031)
JEDEC, JESD22-A-101
-65°C, 1008 hrs.
0°C to +100°C, 5 min. dwell, 10 sec. transfer,
Thermal Shock 10 cycles. MIL-STD-750 (Method
1056) JEDEC, JESD22-A-106
+121°C, 100%RH, 2atm, 24 up to 168 hrs.
EIA/Cooker Test) JEDEC, JESD22-A-102
+260°C, 30 secs. MIL-STD-750 (Method 2031
85%RH, +85°C, 168 hrs., 3 reflow cycles Level
(+260°C Peak). JEDEC-J-STD-020, Level 1
Soldering Parameters
Physical Specifications
Lead Material
Copper Alloy
Terminal Finish 100% Matte-Tin Plated
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
TP
TL
TS(max)
Ramp-up
TS(min)
25
Preheat
Time to peak temperature
(t 25to peak)
Critical Zone
TL to TP
Ramp-down
Time
Reflow Condition
Lead–free assembly
-Temperature Min (Ts(min))
+150°C
Pre Heat
-Temperature Max (Ts(max))
+200°C
-Time (min to max) (Ts)
60 -180 Seconds
Average ramp up rate ( Liquidus Temp TL)
to peak
3°C/Second Max
TS(max) to TL - Ramp-up Rate
3°C/Second Max
Reflow
- Temperature (TL) (Liquidus)
- Time (min to max) (TL)
+217°C
60 -150 Seconds
Peak Temperature (TP)
260 +0/-5°C
Time within 5°C of actual peak Temperature
(tp)
30 Seconds Max
Ramp-down Rate
6°C/Second Max
Time 25°C to peak Temperature (TP)
8 minutes Max
Do not exceed
+260°C
SOCAY Electronics Corp., Ltd.
Revision November 18, 2016
4/5
www.socay.com
@SOCAY Electronics Corp., Ltd. 2016
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.

No Preview Available !

Thyristor Surge Suppressors (TSS)
P0080EA - P5000EA Series - TO-92 @10/700μS, 2KV
Part Numbering
Part Marking
PXXXXE
A
XXXX
Part Marking Code
(Refer to Electrical Characteristics Table)
Date code
Dimensions TO-92
MT1/PIN1
MT2/PIN3
Dimensions
A
B
D
E
G
H
J
L
M
Inches
Min Max
0.176
0.196
0.500
0.095
0.105
0.150
0.135
0.145
0.088
0.096
0.176
0.186
0.013
0.019
0.013
0.017
Millimeters
Min Max
4.47
4.98
12.70
2.41
2.67
3.81
3.43
3.68
2.23
2.44
4.47
4.73
0.33
0.48
0.33
0.43
The TO-92 is designed to meet mechanical standards as set forth in
JEDEC publication number 95.
All leads are insulated from case. Case is electrically
non-conductive. (Rated at 1600 V(AC) RMS for one minute from leads
to case over the operating temperature range.)
Mold flash shall not exceed 0.13 mm per side.
Packaging
Part Number
Pxxx0EA
Description
TO-92 Bulk Pack
Quantity
1000
SOCAY Electronics Corp., Ltd.
Revision November 18, 2016
5/5
www.socay.com
@SOCAY Electronics Corp., Ltd. 2016
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.