P3100SB.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 P3100SB 데이타시트 다운로드

No Preview Available !

JIEJIE MICROELECTRONICS CO. , Ltd
PxxxxSB Series
Rev.2.0
DESCRIPTION:
PxxxxSB series thyristors are a type of semi-conduct
component. They are designed to protect baseband
equipment from damaging overvoltage transients.
such as modems, telephones, line cards, answering
machines, FAX machines, T1/E1, xDSL and more.
FEATURES:
Excellent capability of absorbing transient surge
Quick response to surge voltage (ns Level)
Eliminates overvoltage caused by fast rising transients
Moisture sensitivity level: Level 1
Non degenerative
1
SMB
Symbol
2
ABSOLUTE MAXIMUM RATINGS (TA=25ºC, RH=45%-75%, unless otherwise noted)
Parameter
Storage temperature range
Operating junction temperature range
Repetitive peak pulse current
Symbol
Tstg
Tj
IPP
Value
-60 to +150
-40 to +125
80
Unit
A
ELECTRICAL CHARACTERISTICS (TA=25)
Symbol
Parameter
VDRM Peak off-state voltage
IDRM Off-state current
VS Switching voltage
IS Switching current
VT On-state voltage
IT On-state current
IH Holding current
CO Off-state capacitance
V-I Curve
-V
+I
IT
IS
IH
IDRM
VT
-I
+V
VDRM VS
TEL:+86-513-83639777
- 1 / 5-
http://www.jjwdz.com

No Preview Available !

PxxxxSB Series
JieJie Microelectronics CO. , Ltd
ELECTRICAL CHARACTERISTICS (TA=25, continued)
IDRM@VDRM
VS@IS
VT@ IT
IH CO
Part
Number
μA
V
V
mA
V
A mA pF Marking
max max max max max min max
P0080SB 5
6 25 800 4
2.2 30 130 P-8B
P0220SB 5 18 30 800 4 2.2 30 120 P22B
P0300SB 5 25 40 800 4 2.2 30 120 P03B
P0640SB 5 58 77 800 4 2.2 120 80 P06B
P0720SB 5 66 87 800 4 2.2 120 75 P07B
P0900SB 5 75 98 800 4 2.2 120 70 P09B
P1100SB 5 90 130 800 4 2.2 120 70 P11B
P1300SB 5 120 160 800 4 2.2 120 60 P13B
P1500SB 5 140 180 800 4 2.2 120 55 P15B
P1800SB 5 170 220 800 4 2.2 120 50 P18B
P2300SB 5 190 260 800 4 2.2 120 50 P23B
P2600SB 5 220 300 800 4 2.2 120 45 P26B
P3100SB 5 275 350 800 4 2.2 120 45 P31B
P3500SB 5 320 400 800 4 2.2 120 40 P35B
P3800SB 5 340 450 800 4 2.2 120 40 P38B
Vs is measured at 100KV/s
Off-state capacitance is measured in VDC=2V, VRMS=1V, f=1MHz
SURGE RATINGS
Series
B
2×10us
250
IPP (A) min
8×20us
10×360us
250 125
10×1000us
80
TEL:+86-513-83639777
- 2 / 5-
http://www.jjwdz.com

No Preview Available !

PxxxxSB Series
ORDERING INFORMATION
JieJie Microelectronics CO. , Ltd
MARKING
1409
P-8B
P-8B : Device Marking Code
1409: In ninth week, 2014
SOLDERING PARAMETERS
Reflow Condition
Pre Heat
-Temperature Min (Ts(min))
-Temperature Max(Ts(max))
-Time (Min to Max) (ts)
Average ramp up rate (Liquid us Temp (TL) to peak)
Ts(max) to TL - Ramp-up Rate
Reflow
-Temperature(TL) (Liquid us)
-Temperature(tL)
Peak Temp (Tp)
Time within 5of actual Peak Temp (tp)
Ramp-down Rate
Time 25to Peak Temp (TP)
Do not exceed
Pb-Free assembly
(see FIG.2)
+150
+200
60-180 secs.
3/sec. Max
3/sec. Max
+217
60-150 secs.
+260(+0/-5)
30 secs. Max
6/sec. Max
8 min. Max
+260
TEL:+86-513-83639777
- 3 / 5-
http://www.jjwdz.com

No Preview Available !

PxxxxSB Series
FIG.1: tr × td pulse waveform
%IPP
100 Peak value
tr = rise time to peak value
td = decay time to half value
50 Half value
t(μs)
0
0
tr
td
FIG.3: Normalized Vs change vs. junction
temperature
Percent of Vs change(%)
12
8
4
25
0
-4
-8 Tj()
-40 -20 0 20 40 60 80 100 120 140 160
JieJie Microelectronics CO. , Ltd
FIG.2: Reflow condition
TP
TL
TS(max)
TS(min)
Ramp-up
Preheat
ts
tp
Critical Zone
TL to TP
tL
Ramp-down
25 time to peak temperatue
(t 25to peak)
Time
FIG.4: Normalized DC holding current vs. case
temperature
IH(Tj)/IH(Tj=25)
2.0
1.8
1.6
1.4
1.2 25
1.0
0.8
0.6
0.4 TC ()
-40 -20 0 20 40 60 80 100 120 140 160
PACKAGE MECHANICAL DATA
A
DE
J
K
G
DO-214AA (SMB)
Dimensions
Ref. Millimeters
Inches
Min. Max. Min. Max.
A 4.25 4.75 0.167 0.187
B 3.30 3.94 0.130 0.155
C 1.85 2.21 0.073 0.087
D 0.76 1.52 0.030 0.060
E 5.08 5.59 0.200 0.220
F 0.051 0.203 0.002 0.008
G 0.15 0.31 0.006 0.012
H 2.11 2.44 0.083 0.096
J 6.80
0.270
K 2.60 0.100
L 2.40
0.090
TEL:+86-513-83639777
- 4 / 5-
http://www.jjwdz.com

No Preview Available !

PxxxxSB Series
TAPE AND REEL SPECIFICATION-SMB
d P0 P1
AP
JieJie Microelectronics CO. , Ltd
Dimensions
Ref.
Millimeters
Inches
A 3.76 ± 0.2 0.144 ± 0.012
B 5.69 ± 0.2 0.244 ± 0.012
d
1.5 ± 0.25
0.059 ± 0.004
D 330.0
13.0
D2
13 ± 1
0.512 ± 0.039
E 1.75 ± 0.2 0.059 ± 0.008
F
5.5 ± 0.1
0.222 ± 0.008
P
8.0 ± 0.2
0.315 ± 0.008
P0
4.0 ± 0.2
0.157 ± 0.008
P1
2.0 ± 0.2
0.079 ± 0.008
W 12.0 ± 0.3 0.472 ± 0.008
W1 16.8 ± 2.0 0.661 ± 0.079
OUTLINE
TAPING
REEL
(PCS)
3,000
PER CARTON
(PCS)
48,000
REEL DIAMETERS
(mm)
330
Information furnished in this document is believed to be accurate and reliable.
However, Jiangsu JieJie Microelectronics Co.,Ltd assumes no responsibility for the
consequences of use without consideration for such information nor use beyond it.
Information mentioned in this document is subject to change without notice, apart
from that when an agreement is signed, Jiangsu JieJie complies with the agreement.
Products and information provided in this document have no infringement of patents.
Jiangsu JieJie assumes no responsibility for any infringement of other rights of third
parties which may result from the use of such products and information.
This document is the first version which is made in 22-May.-2015. This document
supersedes and replaces all information previously supplied.
is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd.
Copyright ©2015 Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved.
TEL:+86-513-83639777
- 5 / 5-
http://www.jjwdz.com