P0300SA.pdf 데이터시트 (총 7 페이지) - 파일 다운로드 P0300SA 데이타시트 다운로드

No Preview Available !

ELECTRONICS
Transient
Voltage
Suppressors
PxxxxSX Series
DO-214AA/SMB
Circuit Protection
System
Specifications are subject to change without notice.
Please refer to http://www.ruilon.com.cn for current information.

No Preview Available !

Thyristor Surge Suppressors -PxxxxSX Series
Description
DO-214AA/SMB Series are low capacitance devices designed to
protect broadband equipment such as VOIP, DSL modems and
DSLAMs from damaging overvoltage transients.
The series provides a surface mount solution that enables
equipment to comply with global regulatory standards while limiting
the impact to broadband signals.
Features
Compared to surge suppression using other technologies, P Series devices offer absolute surge protection
regardless of the surge current available and the rate of applied voltage (dv/dt). P Series devices:
• Cannot be damaged by voltage
• Eliminate hysteresis and heat dissipation typically found with clamping devices
• Eliminate voltage overshoot caused by fast-rising transients
• Are non-degenerative
• Will not fatigue
• Have low capacitance, making them ideal for high-speed transmission equipment
Part Number Code
Px x x xSX
LOGO
Breakdown Voltage
Type
S:SMD SMB
T:SMD SMA
E:DIP TO-92
L:DIP DO-15
Peak pilse
current-Ipp
8/20μs
A=150A
B=250A
C=400A
Circuit Protection
System
Specifications are subject to change without notice.
Please refer to http://www.ruilon.com.cn for current information. Page:1

No Preview Available !

Electriacl ChTahraycrtiesritsotircsSurge Suppressors -PxxxxSX Series
Type Number
VDRM
V
IDRM
μA
VBO
V
IH
MA
IS
MA
IT
A
P0080SA
P0080SB
6 5 25 50 800 2.2
6 5 25 50 800 2.2
P0080SC
6 5 25 50 800 2.2
P0300SA
P0300SB
25 5 40 50 800 2.2
25 5 40 50 800 2.2
P0300SC
P0640SA
P0640SB
25 5 40 50 800 2.2
58 5 77 150 800 2.2
58 5 77 150 800 2.2
P0640SC
P0720SA
P0720SB
58 5 77 150 800 2.2
65 5 88 150 800 2.2
65 5 88 150 800 2.2
P0720SC
P0900SA
P0900SB
65 5 88 150 800 2.2
75 5 98 150 800 2.2
75 5 98 150 800 2.2
P0900SC
P1100SA
P1100SB
75 5 98 150 800 2.2
90 5 130 150 800 2.2
90 5 130 150 800 2.2
P1100SC
P1300SA
P1300SB
90 5 130 150 800 2.2
120 5 160 150 800 2.2
120 5 160 150 800 2.2
P1300SC
P1500SA
P1500SB
120 5 160 150 800 2.2
140 5 180 150 800 2.2
140 5 180 150 800 2.2
P1500SC
P1800SA
P1800SB
140 5 180 150 800 2.2
170 5 220 150 800 2.2
170 5 220 150 800 2.2
P1800SC
P2300SA
P2300SB
170 5 220 150 800 2.2
190 5 260 150 800 2.2
190 5 260 150 800 2.2
P2300SC
P2600SA
P2600SB
190 5 260 150 800 2.2
220 5 300 150 800 2.2
220 5 300 150 800 2.2
P2600SC
P3100SA
P3100SB
220 5 300 150 800 2.2
275 5 350 150 800 2.2
275 5 350 150 800 2.2
P3100SC
P3500SA
P3500SB
275 5 350 150 800 2.2
320 5 400 150 800 2.2
320 5 400 150 800 2.2
P3500SC
320 5 400 150 800 2.2
Notes:
Is:Switching Current – maximum current required to switch to on state
IDRM:Leakage Current – maximum peak off-state current measured at VDRM
IH:Holding Current – minimum current required to maintain on state
IPP:Peak Pulse Current – maximum rated peak impulse current
IT:On-state Current – maximum rated continuous on-state current
VDRM:Peak Off-state Voltage – maximum voltage that can be applied while maintaining off state
VT:On-state Voltage – maximum voltage measured at rated on-state current
VT CJ
V
pFMin
pFMax
4 25 150
4 25 150
4 35 260
4 15 140
4 15 140
4 25 250
4 40 60
4 40 60
4 28 80
4 35 60
4 35 75
4 50 150
4 35 55
4 35 70
4 45 140
4 30 50
4 30 70
4 45 115
4 25 45
4 25 60
4 40 105
4 25 40
4 25 55
4 35 95
4 25 35
4 25 50
4 35 90
4 25 35
4 25 50
4 30 80
4 20 35
4 20 45
4 30 80
4 20 35
4 20 45
4 30 70
4 20 35
4 20 40
4 25 65
Circuit Protection
System
Specifications are subject to change without notice.
Please refer to http://www.ruilon.com.cn for current information. Page:2

No Preview Available !

Surge RaTthinygrsistor Surge Suppressors -PxxxxSX Series
Series
A
B
C
2x10 µs
A min
150
250
500
8x20 µs
A min
150
250
400
IPP
10x160 µs
A min
90
150
200
10x560 µs
A min
50
100
150
10x1000 µs
A min
45
80
100
ITSM
50/60 Hz
A min
20
30
50
di/dt
A/μs max
500
500
500
Notes:
1 Current waveform in µs
2 Voltage waveform in µs
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product.
- IPP
- The device must initially be in thermal equilibrium with -40°C < TJ <
Thermal Considerations
Package
DO-214AA
Symbol
TJ
TS
R0JA
Parameter
Operating Junction Temperature Range
Storage Temperature Range
Thermal Resistance: Junction to Ambient
Value
90
Unit
°C
°C
°C/ W
V-I Characteristics
+I
IT
IS
IH
IDRM
-V
+
VT VDRM
VS
V
-I
Normalized V S Change vs. Junction Temperature
14
12
10
8
6
4 25 °C
2
0
-4
-6
-8
-40 -20 0 20 40 60 80 100 120 140 160
Junction Temperature (T J) – °C
t r x t d Pulse Waveform
tr = rise time to peak v alue
100
Peak
Value
td = decay time to half value
Waveform = tr x td
50 Half Value
0
0 tr
td
t – Time (µs)
Normalized DC Holding Current vs. Case Temperature
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
-40 -20
25°C
0 20 40 60 80 100 120 140 160
Case Temperature (T C) - ºC
Circuit Protection
System
Specifications are subject to change without notice.
Please refer to http://www.ruilon.com.cn for current information. Page:3

No Preview Available !

Thyristor Surge Suppressors -PxxxxSX Series
Soldering Parameters
-Temperature Min (T )s(min)
Pre Heat -Temperature Max (T )s(max)
-Time (Min to Max) (t s)
Average ramp up rate (LiquidusTemp (T
to peak)
TS(max) to TL - Ramp-up Rate
-Temperature (T L) (Liquidus)
-Temperature (t L)
Peak Temp (TP)
L)
Time within 5°C of actual PeakTemp (t p)
Ramp-down Rate
Time 2 5°C to PeakTemp (T P)
Do not exceed
Pb-Free assembly
(see Fig. 1)
60-180 secs.
3°C/sec. Max.
3°C/sec. Max.
60-150 secs.
30 secs. Max.
6°C/sec. Max.
8 min. Max.
Physical Specifications
Lead Material
Terminal Finish
Body Material
Copper Alloy
100% Matte-Tin Plated
TP
TL
TS(max)
Figure 1
Ramp-up
TS(min)
Preheat
tS
25
time to peak temperature
(t 2 5ºC to peak)
tP
Critical Zone
TL to T P
tL
Ramp-down
Time
Environmental Specifications
High Temp Voltage
Blocking
80% Rated VDRM (VAC Peak
504 or 1008 hrs. MIL-STD-750 (Method 1040)
JEDEC, JESD22-A-101
Temp Cycling
Biased Temp &
Humidity
High Temp Storage
Low Temp Storage
cycles. MIL-STD-750 (Method 1051) EIA/JEDEC,
JESD22-A104
52 VDC
JEDEC, JESD22-A-101
JEDEC, JESD22-A-101
-65°C, 1008 hrs.
Thermal Shock
Autoclave (Pressure
Cooker Test)
Resistance to Solder
Heat
Moisture Sensitivity
Level
10 cycles. MIL-STD-750 (Method 1056) JEDEC,
JESD22-A-106
JEDEC, JESD22-A-102
Circuit Protection
System
Specifications are subject to change without notice.
Please refer to http://www.ruilon.com.cn for current information. Page:4