5KP8.5.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 5KP8.5 데이타시트 다운로드

No Preview Available !

SCOTTSDALE DIVISION
5KP5.0 thru 5KP110CA, e3
5000 W TRANSIENT VOLTAGE
SUPPRESSOR
DESCRIPTION
These Microsemi 5 kW Transient Voltage Suppressors (TVSs) are designed
for applications requiring protection of voltage-sensitive electronic devices
that may be damaged by harsh or severe voltage transients including
lightning per IEC61000-4-5 and classes with various source impedances
described herein. This series is available in 5.0 to 110 volt standoff voltages
(VWM) in both unidirectional and bidirectional offered in two different package
designs for axial and radial configurations. Microsemi also offers numerous
other TVS products to meet higher and lower power demands and special
applications.
APPEARANCE
CASE 5A
(DO-204AR)
CASE
5R
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
Available in both Unidirectional and Bidirectional
construction (Bidirectional with C or CA suffix)
Available in both axial-leaded and radial packages
(include R prefix in part number for radial package option
shown in figure as “case 5R,” e.g. R5KP5.0A)
Selections for 5.0 to 110 volts standoff voltages (VWM)
Suppresses transients up to 5000 watts @ 10/1000 µs
and 34,000 watts @ 8/20 µs (see Figure 1)
Optional 100% screening for avionics grade is
available by adding MA prefix to part number for added
100% temperature cycle -55oC to +125oC (10X) as well
as surge (3X) and 24 hours HTRB with post test VZ &
IR (in the operating direction for unidirectional or both
directions for bidirectional)
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, and JANTXV are also available
by adding MQ, MX or MV prefixes respectively to part
numbers.
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
RoHS Compliant devices available by adding “e3” suffix
Protection from switching transients and induced RF
Fast response
Protection from ESD, and EFT per IEC 61000-4-2
and IEC 61000-4-4
Secondary lightning protection per IEC61000-4-5
with 42 Ohms source impedance:
Class 1,2,3,4: 5KP5.0A to 5KP110A or CA
Class 5: 5KP5.0A to 5KP110A or CA (short distance)
Class 5: 5KP5.0A to 5KP36A or CA (long distance)
Secondary lightning protection per IEC61000-4-5
with 12 Ohms source impedance:
Class 1 & 2: 5KP5.0A to 5KP110A or CA
Class 3: 5KP5.0A to 5KP78A or CA
Class 4: 5KP5.0A to 5KP40A or CA
Secondary lightning protection per IEC61000-4-5
with 2 Ohms source impedance:
Class 2: 5KP5.0A to 5KP70A or CA
Class 3: 5KP5.0 to 5KP36A or CA
Class 4: 5KP5.0 to 5KP18A or CA
MAXIMUM RATINGS
Peak Pulse Power dissipation at 25ºC: 5000 watts at
10/1000 μs (also see Figures 1 and 2)
Impulse repetition rate (duty factor): 0.05%
tclamping (0 volts to V(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
Operating and Storage temperature: -65ºC to +150ºC
Thermal resistance: 20ºC/W junction to lead, or 80ºC/W
junction to ambient when mounted on FR4 PC board
with 4 mm2 copper pads (1oz) and track width 1 mm,
length 25 mm
Steady-State
or 1.56 watts
Power
at TA =
dissipation:
25ºC when
6 watts
mounted
at TL = 30oC,
on FR4 PC
board described for thermal resistance
Forward Surge Voltage: 3.5 V maximum @ 100 Amps
8.3 ms half-sine wave (unidirectional devices only)
Solder temperatures: 260 ºC for 10 s (maximum)
MECHANICAL AND PACKAGING
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
TERMINALS: Tin-Lead or RoHS compliant
annealed matte-Tin plating readily solderable per
MIL-STD-750, method 2026
MARKING: Body marked with part number
POLARITY: Band denotes cathode for the axial-
leaded package and a dot denotes cathode terminal
for the radial package. Bidirectional not marked for
polarity
WEIGHT: 1.4 grams (approximate)
TAPE & Reel: Standard per EIA-296 for axial
package (add “TR” suffix to part number)
See package dimensions on last page
Copyright © 2007
9-11-2007 REV H
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1

No Preview Available !

SCOTTSDALE DIVISION
5KP5.0 thru 5KP110CA, e3
5000 W TRANSIENT VOLTAGE
SUPPRESSOR
ELECTRICAL CHARACTERISTICS
MICROSEMI
PART
NUMBER
(Note 2)
REVERSE
STAND-OFF
VOLTAGE
VWM
(Note 1)
5KP5.0
5KP5.0A
5KP6.0
5KP6.0A
5KP6.5
5KP6.5A
5KP7.0
5KP7.0A
5KP7.5
5KP7.5A
5KP8.0
5KP8.0A
5KP8.5
5KP8.5A
5KP9.0
5KP9.0A
5KP10
5KP10A
5KP11
5KP11A
5KP12
5KP12A
5KP13
5KP13A
5KP14
5KP14A
5KP15
5KP15A
5KP16
5KP16A
5KP17
5KP17A
5KP18
5KP18A
5KP20
5KP20A
5KP22
5KP22A
5KP24
5KP24A
5KP26
5KP26A
5KP28
5KP28A
5KP30
5KP30A
5KP33
5KP33A
5KP36
5KP36A
5KP40
5KP40A
5KP43
5KP43A
5KP45
5KP45A
5KP48
5KP48A
5KP51
5KP51A
VOLTS
5.0
5.0
6.0
6.0
6.5
6.5
7.0
7.0
7.5
7.5
8.0
8.0
8.5
8.5
9.0
9.0
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
20
20
22
22
24
24
26
26
28
28
30
30
33
33
36
36
40
40
43
43
45
45
48
48
51
51
BREAKDOWN
VOLTAGE
V(BR)
V(BR)
@
VOLTS
6.40 – 7.30
6.40 – 7.00
6.67 – 8.15
6.67 – 7.37
7.22 – 8.82
7.22 – 7.98
7.78 – 9.51
7.78 – 8.60
8.33 – 10.2
8.33 – 9.21
8.89 – 10.9
8.89 – 9.83
9.44 – 11.5
9.44 – 10.4
10.0 – 12.2
10.0 – 11.1
11.1 – 13.6
11.1 – 12.3
12.2 – 14.9
12.2 – 13.5
13.3 – 16.3
13.3 – 14.7
14.4 – 17.6
14.4 – 15.9
15.6 – 19.1
15.6 – 17.2
16.7 – 20.4
16.7 – 18.5
17.8 – 21.8
17.8 – 19.7
18.9 – 23.1
18.9 – 20.9
20.0 – 24.4
20.0 – 22.1
22.2 – 27.1
22.2 – 24.5
24.4 – 29.8
24.4 – 26.9
26.7 – 32.6
26.7 – 29.5
28.9 – 35.3
28.9 – 31.9
31.1 – 38.0
31.1 – 34.4
33.3 – 40.7
33.3 – 36.8
36.7 – 44.9
36.7 – 40.6
40.0 – 48.9
40.0 – 44.2
44.4 – 54.3
44.4 – 49.1
47.8 – 58.4
47.8 – 52.8
50.0 – 61.1
50.0 – 55.3
53.3 – 65.1
53.3 – 58.9
56.7 – 69.3
56.7 – 62.7
I(BR)
mA
50
50
50
50
50
50
50
50
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
MAXIMUM
CLAMPING
VOLTAGE
VC
@ IPP
VOLTS
9.6
9.2
11.4
10.3
12.3
11.2
13.3
12.0
14.3
12.9
15.0
13.6
15.9
14.4
16.9
15.4
18.8
17.0
20.1
18.2
22.0
19.9
23.8
21.5
25.8
23.2
26.9
24.4
28.8
26.0
30.5
27.6
32.2
29.2
35.8
32.4
39.4
35.5
43.0
38.9
46.6
42.1
50.1
45.5
53.5
48.4
59.0
53.3
64.3
58.1
71.4
64.5
76.7
69.4
80.3
72.7
85.5
77.4
91.1
82.4
MAXIMUM
STANDBY
CURRENT
ID
@ VWM
μA
2000*
2000*
5000
5000
2000
2000
1000
1000
250
250
150
150
50
50
20
20
15
15
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
MAXIMUM
PEAK PULSE
CURRENT
IPP (FIG. 2)
A
520
543
439
485
407
447
378
417
350
388
333
367
314
347
295
325
266
294
249
274
227
251
210
232
194
215
188
206
176
192
164
181
155
172
139
154
127
141
116
128
107
119
99
110
93
103
85
94
78
86
70
78
65
72
62
69
58
65
55
61
Copyright © 2007
9-11-2007 REV H
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
MAXIMUM
TEMPERATURE
COEFFICIENT
OF V(BR)
αV(BR)
mV/ ºC
4.0
4.0
4.0
4.0
4.0
4.0
5.0
5.0
6.0
6.0
6.0
6.0
7.0
7.0
8.0
8.0
9.0
9.0
10
10
11
11
12
12
13
13
15
15
18
16
19
18
20
19
24
22
27
24
30
27
33
29
34
30
38
35
41
38
45
40
50
45
54
49
57
51
62
55
65
60
Page 2

No Preview Available !

SCOTTSDALE DIVISION
5KP5.0 thru 5KP110CA, e3
5000 W TRANSIENT VOLTAGE
SUPPRESSOR
MICROSEMI
PART
NUMBER
(Note 2)
REVERSE
STAND-OFF
VOLTAGE
VWM
(Note 1)
BREAKDOWN
VOLTAGE
V(BR)
MAXIMUM
CLAMPING
VOLTAGE
VC
@ IPP
MAXIMUM
STANDBY
CURRENT
ID
@ VWM
MAXIMUM
PEAK PULSE
CURRENT
IPP (FIG. 2)
MAXIMUM
TEMPERATURE
COEFFICIENT
OF V(BR)
VOLTS
V(BR)
@
VOLTS
I(BR)
mA
VOLTS
μA
αV(BR)
A mV/ ºC
5KP54
54
60.0 – 73.3
5
96.3
10
52
70
5KP54A
54
60.0 – 66.3
5
87.1
10
57
64
5KP58
58
64.4 – 78.7
5
103.0
10
49
77
5KP58A
58
64.4 – 71.2
5
93.6
10
53
69
5KP60
60
66.7 – 81.5
5
107.0
10
47
79
5KP60A
60
66.7 – 73.7
5
96.8
10
52
70
5KP64
64
71.1 – 86.9
5
114.0
10
44
85
5KP64A
64
71.1 – 78.6
5
103.0
10
49
75
5KP70
70
77.8 – 95.1
5
125
10
40
93
5KP70A
70
77.8 – 86.0
5
113
10
44
84
5KP75
75
83.3 – 102.0
5
134
10
37
100
5KP75A
75
83.3 – 92.1
5
121
10
41
90
5KP78
78
86.7 – 106.0
5
139
10
36
104
5KP78A
78
86.7 – 95.8
5
126
10
40
94
5KP85
85
94.4 – 115.0
5
151
10
33
113
5KP85A
85
94.4 – 104.0
5
137
10
36
102
5KP90
90
100 – 122
5
160
10
31
120
5KP90A
90
100 – 111
5
146
10
34
109
5KP100
100
111 – 136
5
179
10
28
134
5KP100A
100
111 – 123
5
162
10
31
122
5KP110
110
122 – 149
5
196
10
26
147
5KP110A
110
122 - 135
5
177
10
28
132
NOTE 1: Transient Voltage Suppressors are normally selected with reverse “Stand Off Voltage” VWM which should
be equal to or greater than the dc or continuous peak operating voltage level.
NOTE 2: For bidirectional construction, indicate a C or CA suffix after the part number.
* For the 5KP5.0C and 5KP5.0CA double the ID Maximum Standby Current to 4000 µA
Symbol
VWM
PPP
V(BR)
ID
SYMBOLS & DEFINITIONS
Definition
Symbol
Definition
Working Peak (Standoff) Voltage
Peak Pulse Power
Breakdown Voltage
Standby Current
IPP Peak Pulse Current
VC Clamping Voltage
I(BR) Breakdown Current for V(BR)
Copyright © 2007
9-11-2007 REV H
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 3

No Preview Available !

SCOTTSDALE DIVISION
5KP5.0 thru 5KP110CA, e3
5000 W TRANSIENT VOLTAGE
SUPPRESSOR
GRAPHS
tp – Pulse Time – sec
FIGURE 1
Peak Pulse Power vs. Pulse Time to 50% of
Exponentially Decaying Pulse
Test waveform parameters: tr=10 μs, tp=1000 μs
FIGURE 2
Pulse Waveform
PACKAGE DIMENSIONS
V(BR) Breakdown Voltage - Volts
FIGURE 3
Typical Capacitance vs
Breakdown Voltage
CASE 5A
CASE 5R
NOTE: Dimensions are in inches.
Copyright © 2007
9-11-2007 REV H
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 4