5.0SMDJ26.pdf 데이터시트 (총 7 페이지) - 파일 다운로드 5.0SMDJ26 데이타시트 다운로드

No Preview Available !

Surface Mount Transient Voltage Suppressors (TVS)
5.0SMDJ Series 11 To 440 V 5000W
Description
The 5.0SMDJ series is designed specifically to protect sensitive electronic
equipment from voltage transients induced by lightning and other transient
voltage events.
Features
u For surface mounted applications in order to optimize board space
u Low leakage
u Uni and Bidirectional unit
u Glass passivated junction
u Low inductance
u Excellent clamping capability
u 5000W Peak power capability at 10 × 1000µs waveform Repetition
rate (duty cycle):0.01%
u Fast response time: typically less than 1.0ps from 0 Volts to VBR min
u Typical IR less than 5μA above 25V.
u High Temperature soldering: 260°C/40 seconds at terminals
u Typical maximum temperature coefficient ΔVBR = 0.1% ×
VBR@25°C× ΔT
u Plastic package has Underwriters Laboratory Flammability 94V-0
u Matte tin leadfree Plated
u Halogen free and RoHS compliant
u Typical failure mode is short from over-specified voltage or current
u Whisker test is conducted based on JEDEC JESD201A per its table
4a and 4c
u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
u ESD protection of data lines in accordance with IEC 61000-4-2
(IEC801-2)
u EFT protection of data lines in accordance with IEC 61000-4-4
(IEC801-4)
Uni-directional
Bi-directional
Functional Diagram
Cathode
Bi-directional
Uni-direction
Anode
Applications
TVS devices are ideal for the protection of I/O interfaces, VCC
bus and other vulnerable circuits used in Telecom, Computer,
Industrial and Consumer electronic applications.
Maximum Ratings (TA=25unless otherwise noted)
Parameter
Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note
1), (Note 2)
Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3)
Symbol
PPPM
IPP
Power Dissipation on Infinite Heat Sink at TL=75°C
PM(AV)
Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3)
Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only
(Note 4)
IFSM
VF
Operating junction and Storage Temperature Range.
TJ , TSTG
Notes:
1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2.
2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V.
Value
5000
See Next Table
6.5
300
3.5/5.0
-55 to +150
Unit
Watts
Amps
Watt
Amps
Voltage
°C
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
1/7
www.socay.com
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.

No Preview Available !

Surface Mount Transient Voltage Suppressors (TVS)
5.0SMDJ Series 11 To 440 V 5000W
Electrical Characteristics (TA=25unless otherwise noted)
Part Number
Uni
5.0SMDJ11
5.0SMDJ11A
5.0SMDJ12
5.0SMDJ12A
5.0SMDJ13
5.0SMDJ13A
5.0SMDJ14
5.0SMDJ14A
5.0SMDJ15
5.0SMDJ15A
5.0SMDJ16
5.0SMDJ16A
5.0SMDJ17
5.0SMDJ17A
5.0SMDJ18
5.0SMDJ18A
5.0SMDJ19
5.0SMDJ19A
5.0SMDJ20
5.0SMDJ20A
5.0SMDJ22
5.0SMDJ22A
5.0SMDJ24
5.0SMDJ24A
5.0SMDJ26
5.0SMDJ26A
5.0SMDJ28
5.0SMDJ28A
5.0SMDJ30
5.0SMDJ30A
5.0SMDJ33
5.0SMDJ33A
5.0SMDJ36
5.0SMDJ36A
5.0SMDJ40
5.0SMDJ40A
5.0SMDJ43
5.0SMDJ43A
5.0SMDJ45
5.0SMDJ45A
5.0SMDJ48
5.0SMDJ48A
5.0SMDJ51
5.0SMDJ51A
5.0SMDJ54
5.0SMDJ54A
5.0SMDJ58
5.0SMDJ58A
Bi
5.0SMDJ11C
5.0SMDJ11CA
5.0SMDJ12C
5.0SMDJ12CA
5.0SMDJ13C
5.0SMDJ13CA
5.0SMDJ14C
5.0SMDJ14CA
5.0SMDJ15C
5.0SMDJ15CA
5.0SMDJ16C
5.0SMDJ16CA
5.0SMDJ17C
5.0SMDJ17CA
5.0SMDJ18C
5.0SMDJ18CA
5.0SMDJ19C
5.0SMDJ19CA
5.0SMDJ20C
5.0SMDJ20CA
5.0SMDJ22C
5.0SMDJ22CA
5.0SMDJ24C
5.0SMDJ24CA
5.0SMDJ26C
5.0SMDJ26CA
5.0SMDJ28C
5.0SMDJ28CA
5.0SMDJ30C
5.0SMDJ30CA
5.0SMDJ33C
5.0SMDJ33CA
5.0SMDJ36C
5.0SMDJ36CA
5.0SMDJ40C
5.0SMDJ40CA
5.0SMDJ43C
5.0SMDJ43CA
5.0SMDJ45C
5.0SMDJ45CA
5.0SMDJ48C
5.0SMDJ48CA
5.0SMDJ51C
5.0SMDJ51CA
5.0SMDJ54C
5.0SMDJ54CA
5.0SMDJ58C
5.0SMDJ58CA
Marking
Uni
5PDW
5PDX
5PDY
5PDZ
5PED
5PEE
5PEF
5PEG
5PEH
5PEK
5PEL
5PEM
5PEN
5PEP
5PEQ
5PER
5PES
5PET
5PEU
5PEV
5PEW
5PEX
5PEY
5PEZ
5PFD
5PFE
5PFF
5PFG
5PFH
5PFK
5PFL
5PFM
5PFN
5PFP
5PFQ
5PFR
5PFS
5PFT
5PFU
5PFV
5PFW
5PFX
5PFY
5PFZ
5PGD
5PGE
5PGF
5PGG
Bi
5BDW
5BDX
5BDY
5BDZ
5BED
5BEE
5BEF
5BEG
5BEH
5BEK
5BEL
5BEM
5BEN
5BEP
5BEQ
5BER
5BES
5BET
5BEU
5BEV
5BEW
5BEX
5BEY
5BEZ
5BFD
5BFE
5BFF
5BFG
5BFH
5BFK
5BFL
5BFM
5BFN
5BFP
5BFQ
5BFR
5BFS
5BFT
5BFU
5BFV
5BFW
5BFX
5BFY
5BFZ
5BGD
5BGE
5BGF
5BGG
Reverse
Stand-Off
Voltage
VRWM (V)
11.0
11.0
12.0
12.0
13.0
13.0
14.0
14.0
15.0
15.0
16.0
16.0
17.0
17.0
18.0
18.0
19.0
19.0
20.0
20.0
22.0
22.0
24.0
24.0
26.0
26.0
28.0
28.0
30.0
30.0
33.0
33.0
36.0
36.0
40.0
40.0
43.0
43.0
45.0
45.0
48.0
48.0
51.0
51.0
54.0
54.0
58.0
58.0
Breakdown
Voltage VBR (V)
@IT
MIN MAX
12.20
12.20
14.90
13.50
13.30
13.30
16.30
14.70
14.40 17.60
14.40 15.90
15.60 19.10
15.60 17.20
16.70 20.40
16.70 18.50
17.80 21.80
17.80 19.70
18.90 23.10
18.90 20.90
20.00 24.40
20.00 22.10
21.13 25.76
21.10
22.20
23.30
27.10
22.20
24.40
24.50
29.80
24.40 26.90
26.70
26.70
32.60
29.50
28.90
28.90
35.30
31.90
31.10
31.10
38.00
34.40
33.30 40.70
33.30 36.80
36.70 44.90
36.70 40.60
40.00 48.90
40.00 44.20
44.40 54.30
44.40 49.10
47.80 58.40
47.80 52.80
50.00 61.10
50.00 55.30
53.30 65.10
53.30 58.90
56.70 69.30
56.70 62.70
60.00 73.30
60.00 66.30
64.40
64.40
78.70
71.20
Test
Current
IT
(mA)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum
Clamping
Voltage
VC
@IPP (V)
20.1
18.2
22.0
19.9
23.8
21.5
25.8
23.2
26.9
24.4
28.8
26.0
30.5
27.6
32.2
29.2
34.0
30.8
35.8
32.4
39.4
35.5
43.0
38.9
46.6
42.1
50.0
45.4
53.5
48.4
59.0
53.3
64.3
58.1
71.4
64.5
76.7
69.4
80.3
72.7
85.5
77.4
91.1
82.4
96.3
87.1
103.0
93.6
Maximum
Peak
Pulse
Current
IPP (A)
251.24
277.47
229.55
253.77
212.18
234.88
195.74
217.67
187.73
206.97
175.35
194.23
165.57
182.97
156.83
172.95
148.49
164.07
141.06
155.86
128.17
142.25
117.44
129.82
108.37
119.95
101.00
111.23
94.39
104.34
85.59
94.75
78.54
86.92
70.73
78.29
65.84
72.77
62.89
69.46
59.06
65.25
55.43
61.29
52.44
57.98
49.03
53.95
Maximum
Reverse
Leakage IR
@VRWM
(μA)
800
800
800
800
500
500
200
200
100
100
50
50
20
20
10
10
10
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
2/7
www.socay.com
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.

No Preview Available !

Surface Mount Transient Voltage Suppressors (TVS)
5.0SMDJ Series 11 To 440 V 5000W
Electrical Characteristics (TA=25unless otherwise noted) (Continue)
Part Number
Uni Bi
Marking
Uni Bi
Reverse
Stand-Off
Voltage
VRWM (V)
Breakdown
Voltage VBR (V)
@IT
MIN MAX
5.0SMDJ60
5.0SMDJ60C 5PGH 5BGH
60.0
66.70 81.50
5.0SMDJ60A 5.0SMDJ60CA 5PGK 5BGK
60.0
66.70 73.70
5.0SMDJ64
5.0SMDJ64C 5PGL 5BGL
64.0
71.10 86.90
5.0SMDJ64A 5.0SMDJ64CA 5PGM 5BGM
64.0
71.10 78.60
5.0SMDJ70
5.0SMDJ70C 5PGN 5BGN
70.0
77.80 95.10
5.0SMDJ70A 5.0SMDJ70CA 5PGP 5BGP
70.0
77.80 86.00
5.0SMDJ75
5.0SMDJ75C 5PGQ 5BGQ
75.0
83.30 102.00
5.0SMDJ75A 5.0SMDJ75CA 5PGR 5BGR
75.0
83.30 92.10
5.0SMDJ78
5.0SMDJ78C 5PGS 5BGS
78.0
86.70 106.00
5.0SMDJ78A 5.0SMDJ78CA 5PGT 5BGT
78.0
86.70 95.80
5.0SMDJ80
5.0SMDJ80C 5PGA 5BGA
80.0
88.96 108.80
5.0SMDJ80A 5.0SMDJ80CA 5PGB 5BGB
80.0
88.80 97.60
5.0SMDJ85
5.0SMDJ85C 5PGU 5BGU
85.0
94.40 115.00
5.0SMDJ85A 5.0SMDJ85CA 5PGV 5BGV
85.0
94.40 104.00
5.0SMDJ90
5.0SMDJ90C 5PGW 5BGW
90.0
100.00 122.00
5.0SMDJ90A 5.0SMDJ90CA 5PGX 5BGX 90.0 100.00 111.00
5.0SMDJ100 5.0SMDJ100C 5PGY 5BGY
100.0
111.00 136.00
5.0SMDJ100A 5.0SMDJ100CA 5PGZ 5BGZ
100.0
111.00 123.00
5.0SMDJ110 5.0SMDJ110C 5PHD 5BHD
110.0
122.00 149.00
5.0SMDJ110A 5.0SMDJ110CA 5PHE 5BHE
110.0
122.00 135.00
5.0SMDJ120 5.0SMDJ120C 5PHF 5BHF
120.0
133.00 163.00
5.0SMDJ120A 5.0SMDJ120CA 5PHG 5BHG
120.0
133.00 147.00
5.0SMDJ130 5.0SMDJ130C 5PHH 5BHH
130.0
144.00 176.00
5.0SMDJ130A 5.0SMDJ130CA 5PHK 5BHK
130.0
144.00 159.00
5.0SMDJ140 5.0SMDJ140C 5PHA 5BHA
140.0
155.68 190.40
5.0SMDJ140A 5.0SMDJ140CA 5PHB 5BHB
140.0
155.00 171.00
5.0SMDJ150 5.0SMDJ150C 5PHL 5BHL
150.0
167.00 204.00
5.0SMDJ150A 5.0SMDJ150CA 5PHM 5BHM
150.0
167.00 185.00
5.0SMDJ160 5.0SMDJ160C 5PHN 5BHN
160.0
178.00 218.00
5.0SMDJ160A 5.0SMDJ160CA 5PHP 5BHP
160.0
178.00 197.00
5.0SMDJ170 5.0SMDJ170C 5PHQ 5BHQ
170.0
189.00 231.00
5.0SMDJ170A 5.0SMDJ170CA 5PHR 5BHR
170.0
189.00 209.00
5.0SMDJ180 5.0SMDJ180C 5PHS 5BHS
180.0
201.00 244.80
5.0SMDJ180A 5.0SMDJ180CA 5PHT 5BHT
180.0
201.00 220.00
5.0SMDJ190 5.0SMDJ190C 5PHU 5BHU
190.0
211.21 258.40
5.0SMDJ190A 5.0SMDJ190CA 5PHV 5BHV
190.0
211.00 232.00
5.0SMDJ200A 5.0SMDJ200CA 5PHW 5BHW
200.0
224.00 247.00
5.0SMDJ220A 5.0SMDJ220CA 5PHX 5BHX
220.0
246.00 272.00
5.0SMDJ250A 5.0SMDJ250CA 5PHZ 5BHZ
250.0
279.00 309.00
5.0SMDJ300A 5.0SMDJ300CA 5PJE 5BJE
300.0
335.00 371.00
5.0SMDJ350A 5.0SMDJ350CA 5PJG 5BJG
350.0
391.00 432.00
5.0SMDJ400A 5.0SMDJ400CA 5PJK 5BJK
400.0
447.00 494.00
5.0SMDJ440A 5.0SMDJ440CA 5PJM 5BJM
440.0
492.00
Note:
1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device
2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices
3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double
543.00
Test
Current
IT
(mA)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum
Clamping
Voltage
VC
@IPP (V)
107.0
96.8
114.0
103.0
125.0
113.0
134.0
121.0
139.0
126.0
143.2
129.6
151.0
137.0
160.0
146.0
179.0
162.0
196.0
177.0
214.0
193.0
231.0
209.0
250.6
226.8
268.0
243.0
287.0
259.0
304.0
275.0
322.2
291.6
340.1
307.8
324.0
356.0
405.0
486.0
567.0
648.0
713.0
Maximum
Peak
Pulse
Current
IPP (A)
47.20
52.17
44.30
49.03
40.40
44.69
37.69
41.74
36.33
40.08
35.27
38.97
33.44
36.86
31.56
34.59
28.21
31.17
25.77
28.53
23.60
26.17
21.86
24.16
20.15
22.27
18.84
20.78
17.60
19.50
16.61
18.36
15.67
17.32
14.85
16.41
9.26
8.43
7.41
6.17
5.29
4.63
4.21
Maximum
Reverse
Leakage IR
@VRWM
(μA)
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
3/7
www.socay.com
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.

No Preview Available !

Surface Mount Transient Voltage Suppressors (TVS)
5.0SMDJ Series 11 To 440 V 5000W
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 1 - Peak Pulse Power Rating Curve
Figure 2 - Pulse Derating Curve
100 100
80
10
60
40
1
20
0.1
0.1
1 10 100 1000
td - Pulse Width (μs)
10000
Figure 3 - Pulse Waveform
0
0 25 50 75 100 125 150 175
TA-Ambient temperature(°C)
Figure 4 - Typical Junction Capacitance
150
100
50
tr=10µsec
Peak Value
IPPM
TJ=25°C
Pulse Width(td) is dened
as the point where the peak
current decays to 50% of IPPM
Half Value
IPPM (IPPM/2)
10/1000µsec. Waveform
as dened by R.E.A
tc
0
0 1.0 2.0 3.0
t - Time (ms)
4.0
Figure 5 - Steady State Power Derating Curve
100000
10000
Bi-directional
@zero bins
1000
100
Uni-directional @VRWM
Uni-directional
@zero bins
10 Tj=25°C
f=1.0MHz
Vsig=50mVp-p
1
Bi-directional @VRWM
1.0 10.0 100.0
VBR-Reverse Breakdown Voltage (V)
1000.0
Figure 6 - Maximum Non-Repetitive Surge Current
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
0
25 50 75 100 125 150 175 200
TL - Lead Temperature(°C)
300
250
200
150
100
1
TJ=TJ max.
8.3 ms Single Half Sine-Wave
10
Number of Cycles at 60Hz
100
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
4/7
www.socay.com
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.

No Preview Available !

Surface Mount Transient Voltage Suppressors (TVS)
5.0SMDJ Series 11 To 440 V 5000W
I-V Curve Characteristics
Uni-directional
I
IF
Bi-directional
I
IPP
VC VBRVRW
R
IT VF
V
VC VBRVRW
R
IT
IR
IR
IT
V
VRW VBR VC
R
IPP IPP
Physical Specifications
Weight
Case
Polarity
Terminal
0.007 ounce, 0.21 gram
JEDEC DO-214AB Molded Plastic over
glass passivated junction
Color band denotes cathode except
Bipolar
Matte Tin-plated leads, Solderable per
JESD22-B102D
Soldering Parameters
TP
TL
TS(max)
Ramp-up
TS(min)
25
Preheat
Time to peak temperature
(t 25to peak)
Critical Zone
TL to TP
Ramp-down
Time
Environmental Specifications
Temperature Cycle
Pressure Cooker
High Temp. Storage
HTRB
Thermal Shock
JESD22-A104
JESD22-A102
JESD22-A103
JESD22-A108
JESD22-A106
Reflow Condition
Leadfree assembly
Pre Heat
-Temperature Min (Ts(min))
-Temperature Max (Ts(max))
150°C
200°C
- Time (min to max) (Ts)
60 -180 Seconds
Average ramp up rate ( Liquidus Temp TL)
to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
Reflow
- Temperature (TL) (Liquidus)
- Time (min to max) (TL)
Peak Temperature (TP)
3°C/second max
217°C
60 -150 Seconds
260 +0/-5°C
Time within 5°C
Temperature (tp)
of
actual
peak
20 -40 Seconds
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
Do not exceed
8 minutes Max
280°C
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
5/7
www.socay.com
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.