FR1J.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 FR1J 데이타시트 다운로드

No Preview Available !

HITANO ENTERPRISE CORP.
FR1A THRU FR1K
TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER
VOLTAGE RANGE - 50 to 800 Volts
CURRENT - 1.0 Ampere
FEATURES
* ldeal for surface mounted applications
* Low leakage current
* Glass passivated junction
SMB ( DO-214AA )
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame
retardant
*Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
* Polarity: As marked
* Mounting position: Any
* Weight: 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA = 75 oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
SYMBOL
VRRM
VRMS
VDC
IO
IFSM
FR1A
50
35
50
FR1B
100
70
100
Maximum Instantaneous Forward Voltage at 1.0A DC
Maximum DC Reverse Current
@TA = 25oC
at Rated DC Blocking Voltage
@TA = 100oC
Maximum Reverse Recovery Time (Note 3)
Typical Thermal Resistance (Note 2)
VF
IR
trr
RθJL
150
Typical Junction Capacitance (Note 1)
CJ
Operating and Storage Temperature Range
TJ,TSTG
NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
2. Thermal Resistance (Junction to Ambient), 0.2x0.2in2 (5X5mm2 ) copper pads to each terminal.
3. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A.
FR1D
200
140
200
FR1G
400
280
400
1.0
FR1J
600
420
600
FR1K
800
560
600
UNITS
Volts
Volts
Volts
Amps
30
1.3
5.0
150
250
12
30
-65 to + 175
Amps
Volts
uAmps
500 nSec
0C/ W
pF
0C

No Preview Available !

RATING AND CHARACTERISTIC CURVES ( FR1A THRU FR1K )