ESM101.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 ESM101 데이타시트 다운로드

No Preview Available !

ESM101 THRU ESM106
SURFACE MOUNT SUPERFAST RECOVERY RECTIFIER
REVERSE VOLTAGE:
50 to 400 VOLTS
FORWARD CURRENT:
1.0 AMPERE
FEATURES
· Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
· For surface mounted applications
· High temperature metallurgically bonded construction
· Superfast recovery times
· Cavity-free glass passivated junction
· Capable of meeting environmental standards
of MIL-S-19500
· High temperature soldering : 250°C /10 seconds at terminals
MELF
(5.2) .205
(4.1) .160
MECHANICAL DATA
Case: Molded plastic, MELF
Epoxy: UL 94V-O rate flame retardant
Terminals: Solder plated, solderable per MIL-STD-750,
method 208 guaranteed
Polarity: Color band denotes cathode end
Mounting position: Any
Weight: 0.005 ounce, 0.12 gram
(25.4) 1.0
MIN
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Ratings at 25ambient temperature unless otherwise specified.
Single phase, half wave, 60HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA=55
Peak Forward Surge Current,
8.3ms single half-sine-wave
superimposed on rated load (JEDEC method)
Maximum Forward Voltage at 1.0A and TA=25
Maximum Reverse Current
at Rated DC Blocking Voltage
at TA=25
TA=125
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance (Note 2)
Typical Thermal Resistance (Note 3)
Maximum Reverse Recovery Time (Note 4)
Operating and Storage Temperature Range
Symbols
VRRM
VRMS
VDC
ESM101
50
35
50
I(AV)
ESM102
100
70
100
ESM103
150
105
150
ESM104
200
140
200
1.0
ESM105
300
210
300
ESM106
400
280
400
Units
Volts
Volts
Volts
Amp
IFSM
VF
IR
CJ
RθJA
RθJT
TRR
TJTstg
30
0.95
5.0
100
15
85
35
35
-55 to +175
Amp
1.25 Volts
μAmp
10 pF
nS
/W
NOTES:
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2- Thermal resistance from junction to ambient, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal
3- Thermal resistance from junction to terminal, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal
4- Reverse Recovery Test ConditionsIF=0.5A, IR=1.0A, IRR=0.25A

No Preview Available !

ESM101 THRU ESM106
SURFACE MOUNT SUPERFAST RECOVERY RECTIFIER
RATINGS AND CHARACTERISTIC CURVES