1N4465.pdf 데이터시트 (총 6 페이지) - 파일 다운로드 1N4465 데이타시트 다운로드

No Preview Available !

1N4460 – 1N4496 and 1N6485 – 1N6491
Available on
commercial
versions
VOIDLESS HERMETICALLY SEALED 1.5 WATT
GLASS ZENER DIODES
Qualified per MIL-PRF-19500/406
DESCRIPTION
This Zener voltage regulator series is military qualified to MIL-PRF-19500/406 and is ideal for
high-reliability applications where a failure cannot be tolerated. These industry-recognized 1.5
watt Zener voltage regulators are hermetically sealed with void-less glass construction using
an internal metallurgical bond. It includes Zener selections from 3.3 to 200 volts in standard
5% tolerance. 1% and 2% tolerance versions are also available. Microsemi also offers
numerous other Zener products to meet higher and lower power ratings in both thru-hole and
surface mount packages.
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
Popular JEDEC registered series.
Void-less hermetically sealed glass package.
Triple-layer passivation.
Extremely robust construction.
Internal “Category 1” metallurgical bonds for 1N4462 thru 1N4496 and “Category III” for 1N6485 thru
1N6491 as well as 1N4460 and 1N4461.
JAN, JANTX, JANTXV and JANS qualifications are available per MIL-PRF-19500/406.
RoHS compliant versions available (commercial grade only).
APPLICATIONS / BENEFITS
Regulates voltage over a broad operating current and temperature range.
Extensive selection from 3.3 to 200 V.
Standard voltage tolerances are plus/minus 5% with no suffix.
Tighter tolerances available in plus or minus 2% or 1%.
Flexible axial-lead mounting terminals.
Non-sensitive to ESD per MIL-STD-750 method 1020.
Inherently radiation hard as described in Microsemi MicroNote 050.
Qualified Levels:
JAN, JANTX,
JANTXV and JANS
DO-41 Package
Also available in:
D-5A MELF
Package
(surface mount)
1N4460US – 1N4496US and
1N6485US – 1N6491US
MAXIMUM RATINGS @ TA= 25oC unless otherwise specified
Parameters/Test Conditions
Junction and Storage Temperature
Steady State Power Dissipation @ TL = +112 ºC
L = .375 inch (9.53 mm)
Thermal Resistance Junction-to-Lead @ .375 inch
(9.52 mm) from body
Thermal Impedance @ 10 ms
1N4462 – 1N4496
1N6485 – 1N6491
1N4460 – 1N4461
Forward Voltage
@ 200 mA
@ 1.0 A
Solder Temperature @ 10 s
Symbol
TJ & TSTG
PD
R ӨJL
Z ӨJX
VF
T SP
Value
-65 to +175
1.5
42
Figure 3
Figure 4
Figure 4
1.0
1.5
260
Unit
oC
W
oC/W
ºC/W
V
oC
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
T4-LDS-0183, Rev. 3 (120901)
©2012 Microsemi Corporation
Page 1 of 6

No Preview Available !

1N4460 – 1N4496 and 1N6485 – 1N6491
MECHANICAL and PACKAGING
CASE: Hermetically sealed voidless hard glass with tungsten slugs.
TERMINALS: Tin/lead (Sn/Pb) or RoHS compliant matte/tin (commercial grade only) over copper.
MARKING: Body coated in blue with part number.
POLARITY: Cathode indicated by band.
TAPE & REEL option: Standard per EIA-296. Consult factory for quantities.
WEIGHT: 340 milligrams.
See Package Dimensions on last page.
Reliability Level
JAN = JAN Level
JANTX = JANTX Level
JANTXV = JANTXV Level
JANS = JANS Level
Blank = Commercial
JEDEC type number
(See Electrical Characteristics
table)
PART NOMENCLATURE
JAN 1N4460 C (e3)
RoHS Compliance
e3 = RoHS compliant (available
on commercial grade only)
Blank = non-RoHS compliant
Tolerance Level
Blank = 5 %
C=2%
D = 1%
Symbol
VZ
IZ, IZT, IZK
ZZT or ZZK
VF
IR
I ZM
I ZSM
SYMBOLS & DEFINITIONS
Definition
Zener Voltage: The Zener voltage the device will exhibit at a specified current (IZ) in its breakdown region.
Regulator Current: The dc regulator current (IZ), at a specified test point (IZT), near breakdown knee (IZK).
Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a
specified rms current modulation (typically 10% of IZT or IZK) and superimposed on IZT or IZK respectively.
Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.
Maximum Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and
temperature.
Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating.
Maximum Zener Surge Current: The non-repetitive peak value of Zener surge current at a specified wave form.
T4-LDS-0183, Rev. 3 (120901)
©2012 Microsemi Corporation
Page 2 of 6

No Preview Available !

1N4460 – 1N4496 and 1N6485 – 1N6491
ELECTRICAL CHARACTERISTICS @ 25 ºC Case temperature
TYPE
1N4460
1N4461
1N4462
1N4463
1N4464
1N4465
1N4466
1N4467
1N4468
1N4469
1N4470
1N4471
1N4472
1N4473
1N4474
1N4475
1N4476
1N4477
1N4478
1N4479
1N4480
1N4481
1N4482
1N4483
1N4484
1N4485
1N4486
1N4487
1N4488
1N4489
1N4490
1N4491
1N4492
1N4493
1N4494
1N4495
1N4496
1N6485
1N6486
1N6487
1N6488
1N6489
1N6490
1N6491
NOMINAL
ZENER
VOLTAGE
VZ
TEST
CURRENT
I ZT
MAXIMUM
DYNAMIC
IMPEDANCE
ZZT @ IZT
Volts
6.2
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
15.0
16.0
18.0
20.0
22.0
24.0
27.0
30.0
33.0
36.0
39.0
43.0
47.0
51.0
56.0
62.0
68.0
75.0
82.0
91.0
100.0
110.0
120.0
130.0
150.0
160.0
180.0
200.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
mA
40.0
37.0
34.0
31.0
28.0
25.0
23.0
21.0
19.0
17.0
15.5
14.0
12.5
11.5
10.5
9.5
8.5
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.7
3.3
3.0
2.8
2.5
2.3
2.0
1.9
1.7
1.6
1.4
1.2
76.0
69.0
64.0
58.0
53.0
49.0
45.0
Ohms
4
2.5
2.5
3
4
5
6
7
8
9
10
11
12
14
16
18
20
25
27
30
40
50
60
70
80
100
130
160
200
250
300
400
500
700
1000
1300
1500
10
10
9
9
8
7
5
MAXIMUM KNEE
IMPEDANCE
ZZK @ IZK
Ohms
200
200
400
400
500
500
550
550
550
600
600
650
650
650
700
700
750
800
850
900
950
1000
1100
1300
1500
1700
2000
2500
3000
3100
4000
4500
5000
6000
6500
7000
8000
400
400
400
400
500
500
600
mA
1.0
1.0
.5
.5
.5
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
1.0
1.0
1.0
1.0
1.0
1.0
1.0
MAXIMUM
REVERSE
CURRENT
IR @ VR
µA
10.0
5.0
1.0
.50
.30
.30
.30
.20
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
50
50
35
5.0
4.0
1.0
0.5
Volts
3.72
4.08
4.50
4.92
5.46
8.00
8.80
9.60
10.4
12.0
12.8
14.4
16.0
17.6
19.2
21.6
24.0
26.4
28.8
31.2
34.4
37.6
40.8
44.8
49.6
54.4
60.0
65.6
72.8
80.0
88.0
96.0
104.0
120.0
128.0
144.0
160.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
MAXIMUM
CONTINUOUS
CURRENT
I ZM
(Note 1)
mA
230
210
191
174
157
143
130
119
110
95
90
79
71
65
60
53
48
43
40
37
33
30
28
26
23
21
19
17
16
14
13
12
11
9.5
8.9
7.9
7.2
433
397
366
332
304
280
255
SURGE
CURRENT
@ 8.3 ms
square wave
I ZSM
Amps
2.3
2.1
1.9
1.7
1.6
1.4
1.3
1.2
1.1
.95
.90
.79
.71
.65
.60
.53
.48
.43
.40
.37
.33
.30
.28
.26
.23
.21
.19
.17
.16
.14
.13
.12
.11
.095
.089
.079
.072
4.2
3.9
3.6
3.3
3.0
2.7
2.5
NOTE: 1. See “Maximum Ratings” for PD temperature conditions for leaded package where IZM is applicable.
T4-LDS-0183, Rev. 3 (120901)
©2012 Microsemi Corporation
Page 3 of 6

No Preview Available !

1N4460 – 1N4496 and 1N6485 – 1N6491
GRAPHS
TEMPERATURE COEFFICIENT (%/°C)
FIGURE 1
Temperature Coefficient Characteristics
T4-LDS-0183, Rev. 3 (120901)
TL (°C) (Leads)
FIGURE 2
Temperature-Power Derating Curve
©2012 Microsemi Corporation
Page 4 of 6

No Preview Available !

1N4460 – 1N4496 and 1N6485 – 1N6491
GRAPHS (continued)
tH (Heating time) ms
FIGURE 3
Thermal Impedance Curve for 1N4462 through 1N4496
tH (Heating time) ms
FIGURE 4
Thermal Impedance Curve for 1N6485 through 1N6491 and 1N4460 through 1N4461
T4-LDS-0183, Rev. 3 (120901)
©2012 Microsemi Corporation
Page 5 of 6