1N5391-G.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 1N5391-G 데이타시트 다운로드

No Preview Available !

Axial Silastic Guard Junction Standard Rectifier
1N5391-G Thru. 1N5399-G
Voltage: 50 to 1000 Volts
Forward Current: 1.5 Amps
RoHS Device
Features
DO-15
-Low cost construction.
-Low forward voltage drop.
-Low reverse leakage.
-High forward surge current capability.
1.0(25.4)
MIN.
0.034(0.9) DIA.
0.028(0.7)
-High temperature soldering guarantee: 260°C/10
seconds, 0.375" (9.5mm) lead length at 5lbs
(2.3kg) tension.
Mechanical Data
-Case: transfer-molded plastic.
-Epoxy: UL94V-0 rate flame retardant.
-Lead: Plated axial lead, solderable per MIL-STD-
202E, method 208C.
-Polarity: Cathode indicated by polarity band.
-Mounting position: Any.
-Weight: 0.012 ounce, 0.33grams.
0.300(7.6)
0.230(5.8)
1.0(25.4)
MIN.
0.140(3.6)
0.104(2.6) DIA.
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
Parameter
Symbol 1N5391 1N5392 1N5393 1N5394 1N5395 1N5396 1N5397 1N5398
-G -G -G -G -G -G -G -G
1N5399
-G
Max.repetitive peak reverse voltage
VRRM
50 100 200 300 400 500 600 800 1000
Unit
V
Max.RMS voltage
VRMS 35 70 140 210 280 350 420 560 700 V
Max.DC blocking voltage
VDC 50 100 200 300 400 500 600 800 1000 V
Max. average forward rectified
current , 0.375"(9.5mm) lead length at
TA=75 OC
I(AV)
1.5
A
Peak forward surge current, 8.3mS
single half sine wave superimpose on
rated load (JEDEC method)
IFSM
30
A
Max. instantaneous forward voltage
at IF=1.0A
VF
1.1
V
Max. DC reverse current at TA=25 OC
rated DC blocking voltage TA=100 OC
IR
5.0
50
μA
Max. full load reverse current, full
cycle average 0.375"(9.5mm) lead
length at TL=75 OC
IR(AV)
30
μA
Typical junction capacitance (Note 1)
Typical thermal resistance (Note 2)
CJ
RθJA
13 pF
50 OC/W
Operating junction temperature range
TJ
-55 to +150
OC
Storage temperature range
TSTG
-55 to +150
OC
Notes:
1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
2. Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C. board mounted with 0.2"×0.2" (5.0×
5.0mm) copper pads.
QW-BB021
Comchip Technology CO., LTD.
REV:A
Page 1

No Preview Available !

Axial Silastic Guard Junction Standard Rectifier
Rating and Characteristic Curves (1N5391-G Thru. 1N5399-G)
Fig.1 Typical Forward Current
Derating Curve
1.8
Single phase, half
wave, 60Hz,
Resistive or
1.5 inductive load
1.2
0.9
0.6
0.3
0
0 25 50 75 100 125 150 175
TA, Ambient Temperature (°C)
Fig.2 Max. Non-Repetitive Peak
Forward Surge Current
60
8.3mS, single half
sine-wave, JEDEC
method.
50 TJ=TJmax
40
30
20
10
0
1 10 100
Number of Cycles at 60Hz
Fig.3 Typical Instantaneous Forward
Characteristics
10
1
0.1
Pulse width=300μs.
1% duty cycle
TJ=25 OC
0.01
0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
VF, Instantaneous Forward Voltage (V)
Fig.4 Typical Reverse Characteristics
10
TJ=100 OC
1
TJ=25 OC
0.1
0.01
0
20 40 60 80 100 120 140
Percent of Peak Reverse Voltage (%)
Fig.5 Typical Junction Capacitance
1000
f=1MHz
TJ=25 OC
100
10
0.1 1 10 100
VR, Reverse Voltage (V)
QW-BB021
Comchip Technology CO., LTD.
REV:A
Page 2