SBL1630CT.pdf 데이터시트 (총 3 페이지) - 파일 다운로드 SBL1630CT 데이타시트 다운로드

No Preview Available !

NOT RECOMMENDED
FOR NEW DESIGN
SBL1630CT - SBL1660CT
16A SCHOTTKY BARRIER RECTIFIER
Features
Schottky Barrier Chip
Guard Ring Die Construction for Transient Protection
Low Power Loss, High Efficiency
High Surge Capability
High Current Capability and Low Forward Voltage Drop
For Use in Low Voltage, High Frequency Inverters, Free
Wheeling, and Polarity Protection Applications
Lead Free Finish, RoHS Compliant (Note 3)
Mechanical Data
Case: TO-220AB
Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020C
Terminals: Finish –Tin. Solderable per MIL-STD-202,
Method 208
Polarity: As Marked on Body
Marking: Type Number
Weight: 2.24 grams (approximate)
C
K
B
D
L
M
A
12 3
E
JN
G
HH
Pin 1 +
Pin 2 -
Pin 3 +
P
+
Case
TO-220AB
Dim Min Max
A 14.48 15.75
B 10.00 10.40
C 2.54 3.43
D 5.90 6.40
E 2.80 3.93
G 12.70 14.27
H 2.40 2.70
J 0.69 0.93
K 3.54 3.78
L 4.07 4.82
M 1.15 1.39
N 0.30 0.50
P 2.04 2.79
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
(Note 1)
@ TC = 95°C
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Forward Voltage Drop
@ IF = 8.0A, TC = 25°C
Peak Reverse Current
@TC = 25°C
at Rated DC Blocking Voltage
@ TC = 100°C
Typical Junction Capacitance (Note 2)
Typical Thermal Resistance Junction to Case (Note 1)
Operating and Storage Temperature Range
Symbol
VRRM
VRWM
VR
VR(RMS)
IO
SBL SBL SBL SBL SBL SBL
1630CT 1635CT 1640CT 1645CT 1650CT 1660CT
30 35 40 45 50 60
21 24.5 28 31.5 35
16
42
Unit
V
V
A
IFSM
VFM
IRM
Cj
RθJC
Tj, TSTG
250
0.55
0.5
50
700
3.5
-65 to +150
A
0.70 V
mA
pF
°C/W
°C
Notes:
1. Thermal resistance junction to case mounted on heatsink.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.
DS23014 Rev. 8 - 3
1 of 3
www.diodes.com
SBL1630CT - SBL1660CT
© Diodes Incorporated

No Preview Available !

NOT RECOMMENDED
FOR NEW DESIGN
20
16
12
8
4
0
0
300
250
50 100
TC, CASE TEMPERATURE (°C)
Fig. 1 Forward Current Derating Curve
150
8.3ms single half-sine-wave
200
150
100
50
0
1 10
NUMBER OF CYCLES AT 60Hz
Fig. 3 Max Non-Repetitive Surge Current
100
100
Tj = 100°C
10
Tj = 75°C
1.0
Tj = 25°C
0.1
40
SBL1630 - SBL1645
10
SBL1645 - SBL1660
1.0
0.1
0.1 0.3 0.5 0.7 0.9 1.1
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Voltage
4,000
Tj = 25°C
1,000
100
0.1
1.0 10
VR, REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
100
0.01
0 40 80 120
PERCENT OF PEAK REVERSE VOLTAGE (%)
Fig. 5 Typical Reverse Characteristics
DS23014 Rev. 8 - 3
2 of 3
www.diodes.com
SBL1630CT - SBL1660CT
© Diodes Incorporated

No Preview Available !

NOT RECOMMENDED
FOR NEW DESIGN
Ordering Information (Note 4)
Device
SBL16xxCT*
* xx = Device type, e.g. SBL1645CT
Packaging
TO-220AB
Notes: 4. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02007.pdf.
Shipping
50/Tube
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2010, Diodes Incorporated
www.diodes.com
DS23014 Rev. 8 - 3
3 of 3
www.diodes.com
SBL1630CT - SBL1660CT
© Diodes Incorporated