CKX2.pdf 데이터시트 (총 13 페이지) - 파일 다운로드 CKX2 데이타시트 다운로드

No Preview Available !

PRODUCT SPECIFICATION
Customer:
Product: Metallized Polypropylene Film Capacitor. Class X2
P/N :
DOC.NO. :
Edition: Ver. 3
 
Record of change
Date
23-Mar.-2016
05-Jan.-2017
11-Dec-2017
Ver. Description
1
2 Change part no. designation
3 Delete VDE and related marking
Page
3
4, 8
VENDOR:
HITANO ENTERPRISE CORP.
7F-7, No. 3, Wu Chuan 1st Road, New Taipei Industrial Park,
New Taipei City, TAIWAN, R.O.C.
Tel: +886 2 2299 1331 (Rep.)
Fax: +886 2 2298 2466, 2298 2969
MAKER:
CHIEFCON ELECTRONICS CO. LTD.
NO.23, HER CHEN ROAD, BA DE CITY,
TAOYUAN HSIEN, TAIWAN
Tel:886-3-3641144
Fax:886-3-3623273
Prepared by
23-Mar.-2016
Hwa Wu
Checked by
23-Mar.-2016
Andy Hsu
Approved by
23-Mar.-2016
Paul Shea
Accepted by (customer)
1/13.
 

No Preview Available !

SPECIFICATION
客戶名稱
CUSTOMER
產品 型 號
PRODUCT TYPE
產品尺寸圖 PRODUCT DIMENSIONS
CKX2
WT
H
WT
H
20mm
5.5mm min.
 d min.
 d
L
5mm or customized
Fig. 1
P
Shape: L
Fig. 2
Shape: K
P Fig. 3
Shape: S 印字請詳見內頁 4
Marking see Page 4
尺寸毫米為單位
Dimensions in mm
客戶產品型號 容值 CAP. 標志 公差
CUSTOMER P/N
(uF) Symbol Tol.%
電壓
R.V.
(VAC)
W
±1.0
H
±1.0
T 腳距 P 腳距 S 線徑 d 腳長 L
±1.0 ±1.0 ±1.0 ±0.05 min
圖示
Fig.
產品型號
Manufacturer P/N
  2/13

No Preview Available !

產品編碼對照表 PRODUCT CODE COMPARATIVE TABLE
產品編碼 Product coding
J H 104 K 330 T 150 □□□
型號:
TYPE: CKX2
Internal Code
Dimension of Pitch in mm(腳距)
100:10mm, 150:15mm, 225:22.5mm, 275:27.5mm
Lead Shape(腳型): L, K, S(Bulk), T(Taped)
Rated Voltage(電壓): VAC
Capacitance Tolerance Code(容量誤差
J± 5, K±10, M±20
Nominal Capacitance電容量
Describe in pF, the first two digitals are
significant figures, the third is the number of zeros to follow.
H = Halogen Free, A = Automotive grade, omit if not applicable
Code “J” = CKX2.
3/13
 

No Preview Available !

產品規格說明
PRODUCT SPECIFICATIONS
型號:
TYPE: CKX2
NO. 項目 ITEM
1 承認范圍
SCOPE
說明 DESCRIPTIONS
本規格適用於 CKX2 產品之要求
This specifications cover the requirements of product type CKX2
金屬化聚丙烯薄膜
Metallized Polypropylene Film
交流電容器 (抑制電源電磁干擾用固定電容器/等級-
X2) AC Capacitor (Interference Suppressors Class-X2).
2 各測量皆於標準大氣下進行 STANDARD ATMOSPHERIC CONDITIONS FOR MAKING
2.1 環境溫度 AMBIENT TEMPERATURE
2.2 相對溼度 RELATIVE HUMIDITY(R.H.)
1535(如對結果有任何疑問,該測量環境溫度應為+20 ± 5之間)
15to 35(If there is any doubt on the results, the measurements shall be made at
+20 ± 5)
45%75% (如對結果有任何疑問,該測量相對溼度應為 60% to 70%之間)
45%to 75% (If there is any doubt on the results, the measurements shall be made at
60% to 70%)
2.3 大氣壓力 AIR PRESSURE
86 千帕106 千帕之
86 kpa to 106 kpa
2.4 工作溫度范圍
OPERATING TEMPERATURE RANGE
-40+110間,電容可在額定電壓下持續運作
-40to +110for which the capacitor can be operated continuously at rated
voltage.
3 結構 CONSTRUCTION
3.1 電介質 DIELECTRIC
金屬化聚丙烯薄膜 Metallized Polypropylene Film
3.2 噴金層 METAL SPRAY
特殊焊料
Special Solder
3.3 導線
LEAD WIRE
鍍錫銅包鋼線 Copper-clad Steel Wire
3.4 環氧樹脂 EPOXY RESIN
UL 94V-0 耐燃等級
3.5 塑料外殼 PLASTIC CASE
UL 94V-0 耐燃等級
4 打印 MARKING
4.1 製造商標誌 MANUFACTURER'S
SYMBOL
4.2 型號或材質 TYPE OR MATERIAL
Manufacturer Symbol
“CKX”代表“CKX”類型
“CKX” stands for “CKX” type
4.3 電容類別 CAPACITOR CLASS
“X2” 代表“X2”等級
“X2 stands for “X2” class
4.4 靜電容量
NOMINAL CAPACITANCE 容量用 EIA 三碼表示
Capacitance Expressed in 3-digit (EIA) code.
Example
4.5 容量容許差值 TOLERANCE
4.6 額定電壓 RATED VOLTAGE
4.7 電容氣候類別 / 阻燃等級
CLIMATIC CATEGORY
4.8 國際認證 APPROVAL MARKS
4.9 製造番號 MANUFACTURE CODE
J (±5%) , K(±10%) , M(±20%)
交流電壓
330V in VAC rating. (50/60Hz)
40/110/56/B or GLFB
cULus / ENEC / VDE / CQC
P=7.5
P10
  4/13

No Preview Available !

產品規格說明
PRODUCT SPECIFICATIONS
5 電氣特性 ELECTRICAL CHARACTERISTICS
NO. 項目 ITEM
說明 DESCRIPTIONS
耐壓
5.1 (TV)
Withstand
Voltage
端子之間
Between Terminals
應無異常
Shall be no abnormality
型號:
TYPE:
CKX2
施加 4.3 倍額定直流電壓測試 60 (電壓應
以不超過 150V/s 的速率從零升高到試驗電
壓,時間應從達到電壓時計算,在結束時,
電壓應減少到接近零,並且電容器應通過一
個適當的電阻放電)
Apply 4.3*Ur (DC) for 60 sec (Should be no
more than 150V/s rate increased from zero to
the test voltage, testing time, meets the test
voltage should be calculated at the end of the
trial, the voltage should be reduced to zero
and the capacitor through a resistor of
appropriate discharge.
端子與外殼之間
Between Terminals
&Enclosure
5.2 介質損耗 (DF)
Dissipation Factor
5.3 容量 (CAP)
Capacitance
5.4
絕緣電阻 (I.R.)
Insulation Resistance
應無異常
Shall be no abnormality
1KHz 0.001(0.1%)
0.001(0.1%) at 1 KHz
偏差值如標示(+20 ± 5)
Within the tolerance specified
(at +20 ± 5).
15,000 Mohm (C0.33uf)
容值0.33uf 時,絕緣電阻
15,000M
5,000 Mohm*uF/C (C>0.33uf)
容值>0.33uf 時,絕緣電阻
5,000M*uF / C
2 倍額定電壓+1,500VAC,測試 2 5
最小值 2,000VAC
Apply 2*Ur+1,500VAC for 2 to 5
sec. Min. 2,000VAC
測量頻率: ±2% ;測量電壓: 1
rms Measuring Frequency: ±2%
Measuring Voltage: 1 Vrms..
測量頻率: ±2% ;測量電壓: 1
rms Measuring Frequency: ±2%
Measuring Voltage: 1 Vrms..
印加電壓 100
充電時間 60±5 秒。
Vt=100 VDC
Charge Time : 60±5 sec.
5.5 焊料附著性
Soldering Property
焊料覆蓋面積應超過導線表面
圓周 90%
More than 90% of circumferential
surface of lead wire shall be
covered with new solder.
6 機械特性 MECHANICAL CHARACTERISTICS
焊接溫度為: +235 ± 5
浸焊時間為: 2 ± 0.5
Soldering temperature: +235 ± 5
Immersion duration: 2 ± 0.5 sec.
端子強度
6.1 Terminal
Strength
引張強度
Tensile Strength
應無異常
Shall be no abnormality
沿著軸向和引出方向,施加 1 公斤力量,保
10±1
Apply 1.0Kg for 10 ± 1 sec. to the terminal
in the axial direction and acting in a
direction away from the body.
  5/13