0402AF.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 0402AF 데이타시트 다운로드

No Preview Available !

Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 422-1
Chip Inductors–0402AF Series (1005)
• Higher inductance values than other 0402 inductors
• Ferrite construction for high current handling
• 23 inductance values from 20 nH to 560 nH
Part number1
Inductance2
±5% (nH)
0402AF-200XJL_
0402AF-220XJL_
0402AF-330XJL_
0402AF-360XJL_
0402AF-390XJL_
20
22
33
36
39
0402AF-510XJL_ 51
0402AF-560XJL_ 56
0402AF-720XJL_ 72
0402AF-780XJL_ 78
0402AF-101XJL_ 100
0402AF-141XJL_ 140
0402AF-181XJL_ 180
0402AF-201XJL_ 200
0402AF-221XJL_ 220
0402AF-251XJL_ 250
0402AF-271XJL_
0402AF-301XJL_
0402AF-331XJL_
0402AF-361XJL_
0402AF-391XJL_
270
300
330
360
390
0402AF-421XJL_ 420
0402AF-471XJL_ 470
0402AF-561XJL_ 560
Impedance typ (Ohms)
900 MHz   1.7 GHz
SRF typ3
(MHz)
DCR max4
(Ohms)
83 118
96 146
142 207
157 249
173 263
2600
2500
2300
2300
2200
0.050
0.065
0.060
0.075
0.115
218 330
239 360
311 453
344 522
513 850
1930
1900
1650
1600
1400
0.070
0.095
0.100
0.130
0.160
629 949
832 1270
1110 1890
1050 1560
1230 1940
1220
1150
1000
1150
900
0.260
0.280
0.440
0.530
0.360
1320 1960
1550 2230
1850 2880
1920 2640
2350 2970
860
860
820
810
760
0.550
0.410
0.560
0.575
0.750
2270 2800
2680 3010
3620 3110
700
650
600
0.700
0.730
0.920
Irms5
(mA)
1600
1300
1400
1300
830
1100
1000
1000
970
900
630
560
400
380
520
360
420
350
360
300
340
310
200
1. When ordering, please specify termination and packaging codes:
0402AF-561XJLW
Termination: L = RoHS compliant gold over nickel over silver-palladi-
um-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: W = 7machine-ready reel. EIA-481 punched paper
tape (2000 parts per full reel).
Q = 7machine-ready reel. EIA-481 punched paper
tape (5000 parts per full reel).
U = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter W instead.
2. Inductance measured at 7.9 MHz, 0.1 Vrms, using an Agilent/HP
4286A LCR meter or equivalent with a Coilcraft SMD-F test fixture and
Coilcraft-provided correlation pieces.
3. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft
SMD­‑D test fixture.
4. DCR measured on Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
5. Current that causes a 15°C temperature rise from 25°C ambient.
Because of their open construction, these parts will not saturate. This
information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Designer’s Kit C397 contains 20 each of all values
Core material Ferrite
Terminations  RoHS compliant gold over nickel over silver-palladium-
glass frit. Other terminations available at additional cost.
Weight  0.9 – 1.1 mg
Ambient temperature  –40°C to +85°C with Irms current
Maximum part temperature  +100°C (ambient + temp rise) Derating.
Storage temperature  Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +25 to +150 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging  2000 or 5000 per 7reel.  Paper tape: 8 mm wide,
0.68 mm thick, 2 mm pocket spacing
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 422-1  Revised 10/12/15
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.

No Preview Available !

Document 422-2
Chip Inductors – 0402AF Series
Typical L vs Frequency
Typical Q vs Frequency
1000
100
10
560 nH
270 nH
100 nH
56 nH
20 nH
16
14
100 nH
560 nH
12
10 56 nH
8
20 nH
270 nH
6
4
1
0.001
0.01 0.1
1
Frequency (GHz)
2
0
10 1
10
Frequency (MHz)
100
Typical Impedance vs Frequency
10000
1000
100
560 nH
270 nH
100 nH
56 nH
20 nH
10
1
B
overall
E
A
C Pick and
H
place
F
material
G
EF
D
terminal
Terminal wraparound:
approx 0.007/0,18 both ends
Recommended
Land Pattern
A max B max C max D E F G H
0.044 0.026 0.026 0.020 0.009 0.017 0.018 0.026 inches
1,12 0,66 0,66 0,51 0,23 0,43 0,46 0,66 mm
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
0.1
0.001
0.01 0.1
1
Frequency (GHz)
10
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 422-2  Revised 10/12/15
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.