0402HL.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 0402HL 데이타시트 다운로드

No Preview Available !

Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 913-1
Chip Inductors – 0402HL (1005)
• Higher inductance values than other 0402 ceramic chip • 12 inductance values from 270 nH to 820 nH
inductors
Part number1
0402HL-271XJR_
0402HL-301XJR_
0402HL-331XJR_
0402HL-361XJR_
0402HL-391XJR_
0402HL-471XJR_
0402HL-511XJR_
0402HL-561XJR_
0402HL-601XJR_
0402HL-681XJR_
0402HL-741XJR_
0402HL-821XJR_
Inductance2
±5% (nH)
270
300
330
360
390
470
510
560
600
680
740
820
SRF typ4 DCR max5
Irms6
Q typ3 (MHz) (Ohms) (mA)
11 @ 25 MHz
11 @ 25 MHz
11 @ 25 MHz
11 @ 25 MHz
11 @ 25 MHz
590
600
513
485
260
1.95
2.15
2.23
2.36
2.35
190
190
170
170
170
11 @ 25 MHz
12 @ 25 MHz
12 @ 25 MHz
12 @ 25 MHz
13 @ 25 MHz
220
450
420
440
380
2.67
3.50
3.70
3.78
5.15
160
150
140
130
120
12 @ 25 MHz
13 @ 25 MHz
165
385
5.45
5.85
110
90
1. When ordering, please specify termination and packaging codes:
0402HL-821XJRW
Termination: R = RoHS compliant matte tin over nickel over silver-
platinum-glass frit.
Special order: Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging: W = 7machine-ready reel. EIA-481 punched paper
tape (2000 parts per full reel).
U = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter W instead.
2. Inductance measured at 25 MHz using a Coilcraft SMD-F test fixture
and Coilcraft-provided correlation pieces with an Agilent/HP 4286
impedance analyzer.
3. Q measured using a Coilcraft SMD-F fixture in Agilent/HP 4287A
impedance analyzer or equivalent.
4. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft
SMD­‑D test fixture.
5. DCR measured on Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
6. Current that causes a 15°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute
maximum ratings.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Core material Ceramic
Environmental  RoHS compliant without exemption, halogen free
Terminations  RoHS compliant matte tin over nickel over silver-
platinum-glass frit. Other terminations available at additional cost.
Weight  0.7 – 1.3 mg
Ambient temperature  –40°C to +125°C with Irms current,
Storage temperature  Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Maximum part temperature  +140°C (ambient + temp rise).
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +25 to +150 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging  2000 per 7reel.  Paper tape: 8 mm wide, 0.66 mm thick,
2 mm pocket spacing
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
A max B max C max D
E F G H
I
0.048 0.031 0.022 0.010 0.018 0.008 0.026 0.014 0.025 inches
1,22 0,79 0,56 0,25 0,46 0,20 0,66 0,36 0,64 mm
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 913-1  Revised 01/18/12
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.

No Preview Available !

Document 913-2
Chip Inductors – 0402HL Series
L vs Frequency
Typical Q vs Frequency
Typical Impedance vs Frequency
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 913-2  Revised 01/18/12
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.