0906.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 0906 데이타시트 다운로드

No Preview Available !

Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 163-1
Micro SpringAir Core Inductors
• Small air core inductors feature high Q and tight tolerances
• Acrylic jacket provides a flat top for pick and place
• Solder coated leads ensure reliable soldering
Terminations  RoHS compliant tin-silver over copper Other termina-
tions available at additional cost.
Weight0906: 10 –12 mg; 1606: 18 – 27 mg
Ambient temperature  –40°C to +125°C with Irms current
Maximum part temperature  +140°C (ambient + temp rise)
Storage temperature  Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 0906: 500 per 7reel  Plastic tape:  8 mm wide,
0.3 mm thick, 4 mm pocket spacing, 1.5 mm pocket depth
1606: 500 per 7reel  Plastic tape:  12 mm wide, 0.3 mm thick,
4 mm pocket spacing, 1.6 mm pocket depth
Recommended pick and place nozzle: OD: 0.059; ID: 0.035
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part
number1
Inductance2
Percent
Turns
(nH)  tolerance3
0906-2_L_ 2
0906-3_L_ 3
0906-4_L_ 4
0906-5_L_ 5
1606-6_L_ 6
1.65
2.55
3.85
5.40
5.60
10,5,2
5,2,1
5,2,1
5,2,1
5,2,1
1606-7_L_ 7
1606-8_L_ 8
1606-9_L_ 9
1606-10_L_ 10
7.15
8.80
9.85
12.55
5,2,1
5,2,1
5,2,1
5,2,1
Q4 SRF min5
DCR max6
Irms7
min (GHz) (mOhm) (A)
100 10.0
100 8.2
100 7.5
100 7.0
100 6.5
4.0
5.0
6.0
8.0
9.0
1.6
1.6
1.6
1.6
1.6
100 6.0
100 6.0
100 5.2
100 4.6
10
12
13
14
1.6
1.6
1.6
1.6
1. When ordering, specify tolerance, termination and packaging codes:
1606-10GLC
Tolerance: F = 1%  G = 2%  J = 5%  K = 10%  (Table shows stock
tolerances in bold.)
Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic
tape, 500 parts per full reel.
B = Less than full reel. In tape, but not machine-ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
P = 7machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (3000 parts per
full reel).
2. Inductance measured at 800 MHz using Agilent/HP 4286 or equivalent
with a Coilcraft SMD-A fixture and correlation.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 800 MHz using an Agilent/HP 4291A with an Agilent/
HP 16193A test fixture or equivalents.
5. SRF measured using an Agilent/HP 8720D or equivalent with a Coilcraft
SMD-D fixture.
6. DCR tested on the Cambridge Technology Model 510 Micro-ohmmeter
or equivalent.
7. Current that causes a 15°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute maxi-
mum ratings.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 163-1  Revised 09/16/16
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.

No Preview Available !

Document 163-2
Micro Spring™ Air Core Inductors
Designer’s Kit C308 contains 12 each of all values.
Designer’s Kit C308-2 contains12 each of all 2% values.
Typical L vs Frequency – 0906 Series
14
12
Typical L vs Frequency – 1606 Series
14
12
12.55 nH
10
8
6
4
2
0
100
1000
Frequency (MHz)
5.40 nH
3.85 nH
2.55 nH
1.65 nH
10
8
6
4
2
0
100
9.85 nH
8.80 nH
7.15 nH
5.60 nH
1000
Frequency (MHz)
Typical Q vs Frequency – 0906 Series
250
2.55 nH 1.65 nH
3.85 nH
200 5.40 nH
Typical Q vs Frequency – 1606 Series
250
7.15 nH 8.80 nH
5.60 nH
200
12.55 nH
9.85 nH
150 150
100 100
50
0
100
1000
Frequency (MHz)
50
0
100
1000
Frequency (MHz)
AD
B
Size
0906
1606
A max B max
0.095 0.135
2,41 3,43
0.165 0.135
4,19 3,43
C max
0.060
1,52
0.062
1,58
Pick and place
surface
C
E
F
Recommended Land Patterns
0906 Size
0.031
0,79
1606 Size
0.040
1,02
0.097
2,46
0.040
1,02
D
0.055 ±0.010
1,40 ±0,25
0.055 ±0.010
1,40 ±0,25
E
0.072 ±0.010
1,83 ±0,25
0.144 ±0.012
3,66 ±0,30
F max
0.020
0,51
0.072
1,83
0.020
0,51
Strip
135°
max
Length
Dimensions are in
inches
mm
0° min
0.144
3,66
0.031
0,79
0.097
2,46
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 163-2  Revised 09/16/06
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.