A01TKL.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 A01TKL 데이타시트 다운로드

No Preview Available !

Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 107-1
Mini Air Core Inductors
• Small air core inductors feature high Q and tight tolerances
• Acrylic jacket provides a flat top for pick and place
• Solder coated leads ensure reliable soldering
Terminations  RoHS compliant tin-silver over copper. Other termina-
tions available at additional cost.
Ambient temperature  –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature  Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging A0xT: 700/7reel; 2500/13reel  Plastic tape: 12 mm wide,
0.32 mm thick, 8 mm pocket spacing, 3.3 mm pocket depth
BxxT: 500/7reel; 2200/13reel  Plastic tape: 16 mm wide,
0.28 mm thick, 8 mm pocket spacing, 3.4 mm pocket depth
Recommended pick and place nozzle: OD: 0.110; ID: 0.091
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
SRF DCR
Part
L2 Percent Q4 min5 max6 Irms7 Weight
number1 Turns (nH) tol3 min (GHz) (mOhm) (A) (mg)
A01TKL_ 1 2.5 10
A02T_L_ 2 5.0 5,2,1
A03T_L_ 3 8.0 5,2,1
A04T_L_ 4 12.5 5,2,1
A05T_L_ 5 18.5 5,2,1
145 12.5 1.1 4
140 6.5 1.8 4
140 5.0 2.6 4
137 3.3 3.4 4
132 2.5 3.9 4
31
42
52
65
78
B06T_L_ 6 17.5 5,2,1
B07T_L_ 7 22.0 5,2,1
B08T_L_ 8 28.0 5,2,1
B09T_L_ 9 35.5 5,2,1
B10T_L_ 10 43.0 5,2,1
100 2.2 4.5 4 100
102 2.1 5.2 4 110
105 1.8 6.0 4 118
112 1.5 6.8 4 133
106 1.2 7.9 4 147
1. When ordering, please specify tolerance, termination and packaging codes:
A02TGLC
Tolerance: F = 1%  G = 2%  J = 5%  K = 10%  (Table shows stock
tolerances in bold.)
Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic tape,
700 (AxxT) or 500 (BxxT) parts per full reel.
B = Less than full reel. In tape, but not machine-ready. To have
a leader and trailer added ($25 charge), use code letter C
instead.
D = 13machine-ready reel. EIA-481 embossed plastic tape.
Factory order only, not stocked, 2500 (AxxT) or 2200 (BxxT)
parts per full reel.
2. Inductance measured at 150 MHz with an Agilent/HP 4286 or equivalent, a
Coilcraft SMD-A and correlation.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 150 MHz using an Agilent/HP 4291A with an Agilent/HP 16193A
test fixture or equivalents.
5. SRF tested on an Agilent/HP 8720D or equivalent and a Coilcraft SMD-D fixture.
6. DCR tested on the Cambridge Technology Model Micro-ohmmeter or equivalent.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Dimensions are in
inches
mm
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 107-1  Revised 10/03/11
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.

No Preview Available !

Document 107-2
Mini Air Core Inductors
Designer’s Kit C302 contains 12 each of all 5% values
Designer’s Kit C302-2 contains 12 each of all 2% values
Typical L vs Frequency
25
20
18.5 nH
15
12.5 nH
10
8.0 nH
5 5.0 nH
2.5 nH
0
100
200 400 600 1000
Frequency (MHz)
60
55
50
45
40
35
30
25
20
15
10
100
43.0 nH
35.5 nH
28.0 nH
22.0 nH
17.5 nH
200 400 600 1000
Frequency (MHz)
Typical Q vs Frequency
220
210 2.5 nH
200
190
5.0 nH
180
170
160
150
140
130
100
8.0 nH
12.5 nH
18.5 nH
200 400
Frequency (MHz)
600
1000
135
130
125
120
115
110
105
100
95
90
100
17.5 nH
22.0 nH
28.0 nH
35.5 nH
43.0 nH
200 400 600 1000
Frequency (MHz)
Typical Irms Derating
120
110
100
90
80
70
60
50
40
30
20
10
0
-40
-20
0 20 40 60 80 100 120 140
Ambient temperature (°C)
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 107-2  Revised 10/03/11
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.