G084SN05-V5.pdf 데이터시트 (총 28 페이지) - 파일 다운로드 G084SN05-V5 데이타시트 다운로드

No Preview Available !

AU OPTRONICS CORPORATION
Product Functional Specifications
8.4 SVGA Color TFT-LCD Module with Touch Panel
Model Name: G084SN05 V.5
Approved by
Prepared by
GDBD Marketing Division / AU Optronics Croporation
Customer
Checked & Approved by
(C) Copyright AU Optroncis, Inc.
2006 All Right Reserved.
No Reproduction and Redistribution Allowed.
G084SN05 V.5 ver.0.1
1/28
www.used-lcd.net

No Preview Available !

Version: 0.1
Total Pages: 28
Date: 2006/5/10
Product Functional Specification
8.4 inch SVGA Color TFT LCD Module
Model Name: G084SN05 V.5
(u) Preliminary Specification
( ) Final Specification
(C) Copyright AU Optroncis, Inc.
2006 All Right Reserved.
No Reproduction and Redistribution Allowed.
G084SN05 V.5 ver.0.1
2/28
www.used-lcd.net

No Preview Available !

I. Contents
1.0 Handing Precautions ................................................................................... 5
2.0 General Description ..................................................................................... 6
2.1 Display Characteristics......................................................................... 6
2.2 Functional Block Diagram .................................................................... 7
3.0 Absolute Maximum Ratings ........................................................................ 8
4.0 Optical Characteristics ................................................................................ 9
5.0 Signal Interface............................................................................................11
5.1 Connectors ...........................................................................................11
5.2 Signal Pin..............................................................................................11
5.3 Signal Description............................................................................... 13
5.4 Signal Electrical Characteristics........................................................ 15
6.0 Pixel Format Image .................................................................................... 16
6.1 Scanning Direction ............................................................................. 16
7.0 Parameter guideline for CCFL inverter..................................................... 17
8.0 Interface Timings........................................................................................ 18
8.1 Timing Characteristics........................................................................ 18
8.2 Timing Definition................................................................................. 20
9.0 Power Consumption .................................................................................. 23
10.0 Power ON/OFF Sequence ........................................................................ 24
11.0 Reliability Test Items ................................................................................ 25
12.0 Packing ..................................................................................................... 26
(C) Copyright AU Optroncis, Inc.
2006 All Right Reserved.
No Reproduction and Redistribution Allowed.
G084SN05 V.5 ver.0.1
3/28
www.used-lcd.net

No Preview Available !

II. Record of Revision
Version and Date Page
Old Description
0.1 2006/5/10 All First Draft
New Description
Remark
(C) Copyright AU Optroncis, Inc.
2006 All Right Reserved.
No Reproduction and Redistribution Allowed.
G084SN05 V.5 ver.0.1
4/28
www.used-lcd.net

No Preview Available !

1.0 Handing Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnection from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a module has to be put back into the packing container slot after once it was
taken out from the container, do not press the center of the CCFL Reflector edge.
Instead, press at the far ends of the CCFL Reflector edge softly. Otherwise the TFT
module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the interface Connector of the TFT module.
11) After installation of the TFT module into an enclosure, do not twist nor bend the TFT
module even momentary. At designing the enclosure, it should be taken into
consideration that no bending/twisting forces are applied to the TFT module from
outside. Otherwise the TFT module may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please
follow local ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module
should be supplied by power complied with requirements of Limited Power Source, or
be applied exemption.
14) The LCD module is designed so that the CCFL in it is supplied by Limited Current
Circuit. Do not connect the CCFL in Hazardous Voltage Circuit.
(C) Copyright AU Optroncis, Inc.
2006 All Right Reserved.
No Reproduction and Redistribution Allowed.
G084SN05 V.5 ver.0.1
5/28
www.used-lcd.net