A030JTN01.0.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 A030JTN01.0 데이타시트 다운로드

No Preview Available !

A030JTN01.0 product Spec
Version
Page
1.0
1/49
CUSTOMER APPROVAL SHEET
Company Name
MODEL
CUSTOMER
APPROVED
A030JTN01.0
Title :
Name :
APPROVAL FOR SPECIFICATIONS ONLY (Spec. Ver. 1.0 )
APPROVAL FOR SPECIFICATIONS AND ES SAMPLE (Spec. Ver.
APPROVAL FOR SPECIFICATIONS AND CS SAMPLE (Spec. Ver.
CUSTOMER REMARK :
)
)
AUO PM :
P/N : 97.03A35.000
Comment:
1 Li-Hsin Rd. 2. Science-Based Industrial Park
Hsinchu 300, Taiwan, R.O.C.
Tel: +886-3-500-8899
Fax: +886-3-577-2730
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR 1
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

A030JTN01.0 product Spec
Version
Page
1.0
2/49
Doc. version: 1.0
Total pages: 55
Date:
2012/01/30
Product Specification
3.0COLOR TFT-LCD MODULE
Model Name
Planned Lifetime:
Phase-out Control:
EOL Schedule:
A030JTN01.0
From 2011/Sep To 2012/Sep
From 2012/Oct To 2013/Mar
2013/Mar
< > Preliminary Specification
<> Final Specification
Note: The content of this
specification is subject to change
without prior notice.
© 2011 AU Optronics
All Rights Reserved,
Do Not Copy.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR 2
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

A030JTN01.0 product Spec
Version
Page
Record of Revision
Version Revise Date
1.0 2012/01/30
Page
First version
Content
1.0
3/49
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR 3
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

A030JTN01.0 product Spec
Version
Page
1.0
4/49
Contents
Precaution in Design.............................................................................................................. 6
1. Notice ............................................................................................................................................................6
2. For Handing And System Design ..................................................................................................................7
3. For Operating LCD Module ...........................................................................................................................9
4. Precaution For Storage .................................................................................................................................9
5. Other Notice ................................................................................................................................................10
6. Precaution for Discarding Liquid Crystal Modules ......................................................................................10
A. Physical specifications ................................................................................................... 11
B. Electrical specifications .................................................................................................. 12
1. Pin assignment ............................................................................................................................................12
2. Absolute maximum ratings ..........................................................................................................................14
3. Electrical characteristics ..............................................................................................................................14
3.1 Recommended operating conditions (GND=0V) ...............................................................................14
3.2 Electrical characteristics (GND=0V) ..................................................................................................14
3.2 Digital input signal overshoot and undershoot limitation....................................................................15
3.3 Recommended Capacitance Values of External Capacitor ...............................................................16
3.4 Backlight driving conditions................................................................................................................16
4. Input timing AC characteristic......................................................................................................................17
5. Input timing format.......................................................................................................................................18
5.1 UPS051 timing conditions (Refer to Fig.1 Fig.2 Fig.3).......................................................................18
5.2 YUV 320 8-bit serial mode (Refer to Fig.4 Fig.5 ) ..............................................................................21
5.3 YUV 320 to RGB conversion..............................................................................................................24
6. Serial control interface AC characteristic.....................................................................................................25
6.1 Timing chart........................................................................................................................................25
6.2 The configuration of serial data at SDA terminal is at below..............................................................26
6.3 Register table .....................................................................................................................................27
6.4 Register description ...........................................................................................................................28
C. Optical specification (Note 1, Note 2, Note 3)................................................................ 38
D. Reliability test items ........................................................................................................ 41
E. Packing Design ................................................................................................................ 43
1. Packing form................................................................................................................................................43
F. Outline dimension ............................................................................................................ 44
G. Application note ............................................................................................................... 45
1. Input Data Timing ........................................................................................................................................45
2. Application circuit.........................................................................................................................................46
2.1 With external LED driver circuit..........................................................................................................46
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR 4
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

A030JTN01.0 product Spec
Version
1.0
Page
5/49
3. Power on/off sequence................................................................................................................................47
3.1 Power on (Standby Disabling) ............................................................................................................47
3.2 Power off (Standby Enabling).............................................................................................................48
4. Recommended power on/off serial command settings ...............................................................................49
a. Recommended Power On Register Setting with external LED driver..................................................49
b. Recommended Power Off Register Setting .........................................................................................49
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR 5
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.