A030JN01-V0.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 A030JN01-V0 데이타시트 다운로드

No Preview Available !

A030JN01 V0 Product Spec
Version
Page
0.0
1/49
CUSTOMER APPROVAL SHEET
Company Name
MODEL
CUSTOMER
APPROVED
A030JN01 V0
Title :
Name :
APPROVAL FOR SPECIFICATIONS ONLY (Spec. Ver. )
APPROVAL FOR SPECIFICATIONS AND ES SAMPLE (Spec. Ver.
APPROVAL FOR SPECIFICATIONS AND CS SAMPLE (Spec. Ver.
CUSTOMER REMARK :
)
)
AUO PM :
P/N : 97.03A31.000
Comment:
1 Li-Hsin Rd. 2. Science-Based Industrial Park
Hsinchu 300, Taiwan, R.O.C.
Tel: +886-3-500-8899
Fax: +886-3-577-2730
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS W ITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

A030JN01 V0 Product Spec
Version
0.0
Page
2/49
Doc. version: 0.0
Total pages: 49
Date:
2010/6/28
Product Specification
3.0COLOR TFT-LCD MODULE
Model Name
Planned Lifetime:
Phase-out Control:
EOL Schedule:
A030JN01 V0
From 2010/July. To 2011/July.
From 2011/July. To 2012/July.
2012/July.
< > Preliminary Specification
< > Final Specification
Note: The content of this
specification is subject to change
without prior notice.
© 2008 AU Optronics
All Rights Reserved,
Do Not Copy.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS W ITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

A030JN01 V0 Product Spec
Version
Page
Record of Revision
Version Revise Date
0.0 2009/06/28
Page
First draft
Content
0.0
3/49
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS W ITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

A030JN01 V0 Product Spec
Version
Page
0.0
4/49
Contents
A. Physical specifications ..................................................................................................... 6
B. Electrical specifications .................................................................................................... 7
1. Pin assignment ....................................................................................................................................... 7
2. Absolute maximum ratings ...................................................................................................................... 9
3. Electrical characteristics.......................................................................................................................... 9
3.1 Recommended operating conditions (GND=0V) ............................................................................. 9
3.2 Electrical characteristics (GND=0V) ............................................................................................... 9
3.2 Digital input signal overshoot and undershoot limitation .................................................................10
3.3 Recommended Capacitance Values of External Capacitor.............................................................11
3.4 Backlight driving conditions ...........................................................................................................11
4. Input timing AC characteristic .................................................................................................................12
5. Input timing format .................................................................................................................................13
5.1 UPS051 timing conditions (Refer to Fig.1 Fig.2 Fig.3)....................................................................13
5.2 YUV 320 8-bit serial mode (Refer to Fig.4 Fig.5 )...........................................................................16
5.3 YUV 320 16-bit parallel mode(Refer to Fig.6 Fig.7 ).......................................................................19
5.4 YUV 640 16-bit parallel mode(Refer to Fig.8 Fig.10 ).....................................................................22
5.5 YUV 720 16-bit parallel mode(Refer to Fig.9 Fig.10 ).....................................................................22
5.6 YUV 320 to RGB conversion .........................................................................................................25
5.7 YUV 720/YUV 640 to RGB conversion ..........................................................................................25
6. Serial control interface AC characteristic ................................................................................................26
6.1 Timing chart ..................................................................................................................................26
6.2 The configuration of serial data at SDA terminal is at below ...........................................................27
6.3 Register table................................................................................................................................28
6.4 Register description ......................................................................................................................29
C. Optical specification (Note 1, Note 2, Note 3)................................................................ 38
D. Reliability test items ........................................................................................................ 41
E. Packing form .................................................................................................................... 43
F. Outline dimension ............................................................................................................ 44
G. Application note ............................................................................................................... 45
1. Application circuit ...................................................................................................................................45
1.1 With internal LED driver circuit ......................................................................................................45
1.2 With external LED driver circuit .....................................................................................................46
2. Power on/off sequence...........................................................................................................................47
2.1 Power on (Standby Disabling) .......................................................................................................47
2.2 Power off (Standby Enabling) ........................................................................................................48
3. Recommended power on/off serial command settings ............................................................................49
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS W ITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

A030JN01 V0 Product Spec
Version
Page
0.0
5/49
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS W ITHOUT PERMISSION FROM AU OPTRONICS CORP.