© ABLIC Inc., 2015-2017
AUTOMOTIVE, 125°C OPERATION,
36 V INPUT, 200 mA VOLTAGE REGULATOR
WITH RESET FUNCTION
The S-19311 Series, developed by using high-withstand voltage CMOS technology, is a positive voltage regulator with the
reset function, which has high-withstand voltage and high-accuracy output voltage. This IC has a built-in low on-resistance
output transistor which provides a small dropout voltage and a large output current. Also, a built-in overcurrent protection
circuit to limit overcurrent of the output transistor and a built-in thermal shutdown circuit to limit heat are included.
High heat radiation TO-252-5S(A) and HSOP-8A packages enable high-density mounting.
Caution This product can be used in vehicle equipment and in-vehicle equipment. Before using the product in
the purpose, contact to ABLIC Inc. is indispensable.
Output voltage accuracy:
Input and output capacitors:
Built-in overcurrent protection circuit:
Built-in thermal shutdown circuit:
3.0 V to 5.3 V, selectable in 0.1 V step
4.0 V to 36.0 V
2.0% (Tj = 40°C to 150°C)
120 mV typ. (5.0 V output product, IOUT = 100 mA)
Possible to output 200 mA (VIN = VOUT(S) 1.0 V)*1
A ceramic capacitor of 2.2 F or more can be used.
70 dB typ. (f = 100 Hz)
Limits overcurrent of output transistor.
Detection temperature 170°C typ.
Detection voltage accuracy:
Release delay time:
2.6 V to 5.0 V, selectable in 0.1 V step
100 mV (Tj = 40°C to 150°C)
0.12 V min.
18 ms typ. (CDLY = 47 nF)
Nch open-drain output (Built-in pull-up resistor)
Operation temperature range:
Lead-free (Sn 100%), halogen-free
Withstand 45 V load dump
During operation: 60 A typ., 95 A max. (Tj = 40C to 150C)
Ta = 40°C to 125°C
*1. Please make sure that the loss of the IC will not exceed the power dissipation when the output current is large.
*2. Contact our sales office for details.
Constant-voltage power supply and reset circuit for automotive electric component
For automotive use (engine, transmission, suspension, ABS, related-devices for EV / HEV / PHEV, etc.)