Fiber Optic Transmitter
OPF692, OPF693 Series
• Low Cost 850 nm LED technology
• Popular ST® style receptacle
• Pre-tested with ﬁber to assure performance
• Component pre-mounted and ready to use
• 55MHz opera on
The OPF692 and OPF693 ﬁber op c transmi ers are high performance devices packaged for data communica on links.
These transmi ers are an 850nm GaAlAs LED and are speciﬁcally designed to eﬃciently launch op cal power into ﬁbers
ranging in size from 50/125µm up to 200/300µm diameter ﬁber. Mul ple power ranges with upper and lower limits are
oﬀered which allows the designer to select a device best suited for the applica on.
These products’ combina on of features including high speed and eﬃcient coupled power makes them ideal transmi ers
for integra on into all types of data communica ons equipment.
The mechanical design of these packages are intended for PC Board or panel moun ng. They are shipped with a lock
washer, jam nut, 2 #2-56 screws, and a protec ve dust cap.
• Industrial Ethernet equipment
• Copper-to-ﬁber media conversion
• Intra-system ﬁber op c links
• Video surveillance systems
Conduc ve Plas c
Zinc, Die Cast
Typical Coupled Power
IF = 100mA, 25°C
Step Index 0.41 315µW
RoHS ESD Class 2 ST® is a registered trademark of AT&T.
TT Electronics reserves the right to make changes in product speciﬁcation without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
All Optek OPF LED emi ers are AEL Class I as deﬁned
by IEC 60825-1 and are Risk Group 1 (Low-Risk) as de-
ﬁned by IEC 62471.
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Issue B 08/2016 Page 1